Scribd
Upload
581 views4 pages

IEC 60870-5-104 Test Method - 1

The document describes two test methods for testing IEC 60870-5-104 communication. The first method uses a FreyrSCADA application to monitor values and send commands from a client simulator to a server. The second method uses a KEPserverEX6 OPC server to establish communication between an OPC client and the server, allowing monitoring of tags and reading/writing of values. Both methods test common data points like single/double points and scaled values based on IEC 60870-5-104 groups and IDs.

Uploaded by

keith1096
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
581 views4 pages

IEC 60870-5-104 Test Method - 1

The document describes two test methods for testing IEC 60870-5-104 communication. The first method uses a FreyrSCADA application to monitor values and send commands from a client simulator to a server. The second method uses a KEPserverEX6 OPC server to establish communication between an OPC client and the server, allowing monitoring of tags and reading/writing of values. Both methods test common data points like single/double points and scaled values based on IEC 60870-5-104 groups and IDs.

Uploaded by

keith1096
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 4

IEC 60870-5-104 Test Method

- 2021. 10 -
Communication Test Method 1 – using FreyrSCADA application

1. Read and check value with timestamp LDC DCS


(on FreyrSCADA IEC 60870-5-104 Client Simulator) IEC 60870-5-104 Client IEC 60870-5-104 Server

Ethernet TCP/IP
(IEC 60870-5-104 )

IEC 60870-5-104
Ovation Ethernet Link
Client Simulator
Controller Module
(or equivalent module to support IEC 60870-5 Interface)
2. Command to Server
• IP : Ovation ELC IP (xxx.xxx.xxx.xxx)
(Command from FreyrSCADA IEC 60870-5-104 Client Simulator and check on DCS) • Port No : 2404

Example test points for Client Example test points for server :
SIGNAL ID REMARK IEC 60870-5 Group ID

M_SP_NA_1 Monitoring Single Point M_SP_TB_1 (30)


Map
C_SC_TA_1 Command Single Point Command C_SC_TA_1 (58)

M_DP_NA_1 Monitoring Double Point M_DP_TB_1 (31)


Map
C_DC_TA_1 Command Double Command C_DC_TA_1 (59)

M_ST_NA_1 Monitoring Step Position M_ST_TB_1 (32)


Map
C_RC_TA_1 Command Regulating Step Command C_RC_TA_1 (60)

M_ME_NB_1 Monitoring Measured Scaled M_ME_TE_1 (35)


Map
C_SE_TB_1 Command Set Point Command –Scaled Value C_SE_TB_1 (62)

M_ME_NC_1 Monitoring Measured Short Float M_ME_TF_1 (36)


Map
C_SE_TC_1 Command Set Point Command – Float Value C_SE_TC_1 (63)

M_BO_NA_1 Monitoring Bitstring M_BO_TB_1 (33)


Map
C_BO_TA_1 Command Bitstring of 32bit Command C_BO_TA_1 (64)

2
Communication Test Method 2 – using KEPserverEX6 (OPC server)

LDC DCS
IEC 60870-5-104 Client IEC 60870-5-104 Server
1. Configuration on KEPserverEX6 and tag assignment
- Channel name : IEC 60870-5-104 Master
- Destination Host : Ovation ELC IP (xxx.xxx.xxx.xxx)
Ethernet TCP/IP
- Destination Port : 2404
(IEC 60870-5-104 )

KEPserverEX6
Ovation Ethernet Link
Controller Module
(or equivalent module to support IEC 60870-5 Interface)
• IP : Ovation ELC IP (xxx.xxx.xxx.xxx)
• Port No : 2404

OPC Communication
(OPC SERVER - KEPserverEX6)

2. Connect to KEPserverEX6 OPC Server by OPC quick client

(OPC CLIENT - OPC Quick Client)

3. Read/Write test on OPC quick client and DCS


(Example test point is same as previous page)

3
Communication Test Method 1 – using FreyrSCADA application

1. Read and check value with timestamp LDC DCS


(on FreyrSCADA IEC 60870-5-104 Client Simulator) IEC 60870-5-104 Client IEC 60870-5-104 Server

Ethernet TCP/IP
(IEC 60870-5-104 )

IEC 60870-5-104
Ovation Ethernet Link
Client Simulator
Controller Module
(or equivalent module to support IEC 60870-5 Interface)
2. Command to Server
• IP : Ovation ELC IP (xxx.xxx.xxx.xxx)
(Command from FreyrSCADA IEC 60870-5-104 Client Simulator and check on DCS) • Port No : 2404

Example test points for Client Example test points for server :
SIGNAL ID REMARK IEC 60870-5 Group ID

M_SP_NA_1 Monitoring Single Point M_SP_TB_1 (30)


Map
C_SC_TA_1 Command Single Point Command C_SC_TA_1 (58)

M_DP_NA_1 Monitoring Double Point M_DP_TB_1 (31)


Map
C_DC_TA_1 Command Double Command C_DC_TA_1 (59)

M_ST_NA_1 Monitoring Step Position M_ST_TB_1 (32)


Map
C_RC_TA_1 Command Regulating Step Command C_RC_TA_1 (60)

M_ME_NB_1 Monitoring Measured Scaled M_ME_TE_1 (35)


Map
C_SE_TB_1 Command Set Point Command –Scaled Value C_SE_TB_1 (62)

M_ME_NC_1 Monitoring Measured Short Float M_ME_TF_1 (36)


Map
C_SE_TC_1 Command Set Point Command – Float Value C_SE_TC_1 (63)

M_BO_NA_1 Monitoring Bitstring M_BO_TB_1 (33)


Map
C_BO_TA_1 Command Bitstring of 32bit Command C_BO_TA_1 (64)

You might also like