CV3686H-A50
Common problems solution
—Power Unit Problem Solving
—Display Unit Problem Solving
—Audio Unit Problem Solving
—Functional Unit Problem Solving
USB1
IO DDR3
USB2
Built-in 256MB
+128MB external
HDMI1 IO 128MB NAND
HDMI2 Flash
HDMI3(ARC)
MSD3686 VBY1
AV IN LCD
YPbPr
SCART
V2221
Ethernet
ATV/DVB-T/T2
R842
DVB-S2 EARPHONE
RDA5815
Picture 1: Power Units Problem Solving
(Mainboard can not boot) Check whether the 12V at
JAGE1 is normal after power.
Press the POWER button to check.
Whether the STANDBY = 1
N Y
Whether main board testing point TP10 got 0.98V?
testing point TP14 got 5V?
testing point TP11 got 3.3V?
testing point TP3 got 1.5V?
N Y
Check the Normal booting
Check AC power s UD8,UD10,UD9,
upply circuit UD1 related devices
After power on, check R12
whether got 5v ,testing
point C366 got 3.3V ?
N Y
Check C38,
Whether is in high level? OK
Check Q6
Picture 2
Display unit ( black screen)
Black screen
Whether the voltage that
power panel supply to Inverter
is normal?
Y N
Check the correctness of backlight ON/OFF circuit.
Check the correctness of the backlight ADJ circuit.
Check the circuit above to SOC. Check the external power supply circuit
No sound
Picture 3
If there is any audio signal input
or Whether amplifier power supply
Audio part (no sound)
is normal?
N Y
Whether the volume,
MUTE
setting is normal?
N Y
Whether there is
signal output from JA1?
Y N
Whether there is signal
input in
UA1 （ VA2221 ） pin 3/12 ?
Y N
Check and repair
network
Check of the connecting
peripheral part between
audio U201 and UA1
equipment: Check Check if the U201 welded
amplifier Resetting external Well , re-weld UA1 or change
power loudspeaker VA2221 chip.
supply
circuit
TV no searching
/no image
Picture 4
Check whether
T2+T+C Function unit (ATV/DTV video
external RF input signal
is normal? broke down)
N Y
Whether main board testing FBT4 output 3.3V?
Y
N
Check RT10,RT11,
whether there is I2C data?
Y N
Check Tuner have single output?
Y N
Repair UT1 to
U201 middle- Check the
Frequency part tuner UT1
net, related circuits
Check and Check and
repair repair Q6
peripheral Check and repair
network
RF I2C network
equipment
TV no searching
/no image
Picture 5
Check whether
S2 Function unit (DTV video broke
external RF input signal
is normal? down)
N Y
Whether main board testing FBT1 output 3.3V?
Y
N
Check RT3,RT4,
whether there is I2C data?
Y N
Check Tuner have single output?
Y N
Repair UT3 to
U201 middle- Check the
Frequency part tuner UT3
net, related circuits
Check and Check and
repair repair Q6
peripheral Check and repair
network
RF I2C network
equipment
TV no sound, only picture Picture 6
Function unit (ATV/DTV no
sound)
Whether there is
sound under PC AV ？
N Y
Whether software is
OK? input system is
set correctly?
Refer to “NO SOUND”
repair guide Change U201
Picture 7
Function unit （ PC ）
Under PC
Image not Miss color, Whether the
Color contact of Image No signal
in the middle shakes
cast VGA socket
is good?
Whether VS,HS signal
Whether U201
is regular or stable? Whether the
R.G.B input signal is normal?
contact of
VGA socket
Y N Y N is good?
Carry out OSD setting
The system Check VS.HS Check VS.HS
auto-adjust doesn’t match,
setting Check VGA circuit circuit
operation reset it,
is incorrect, input circuit
reset it or input mode
doesn’t support
Picture 8
Function unit （ HDMI ）
Under HDMI
Whether HDMI There is image
No image
contact but no sound
is good?
Check whether
HOTPLUG pin is high?
Whether there is
Y sound under PC?
Check HDMI related
network of U201
Y N
Y N
Change the software and Check HDMI Check HDMI Refer to "no sou
Re-weld the U3&HDMI and input net input network nd" repair guide
connecter work and EDID
