OptiX RTN 980L IP LH

Hardware (Integrated LH)

Description

www.huawei.com

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

 Objectives
 Upon completion of this course, you will be able to:
 Describe the product positioning of the RTN 980L
 List the components and boards of the RTN 980L
 Describe the function and feature of the RTN 980L

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page3
 Contents
1. OptiX RTN 980L IP LH (Integrated LH) Product Overview

2. OptiX RTN 980L IP LH (Integrated LH) Product Structure

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page4
 Contents
1. OptiX RTN 980L IP LH (Integrated LH) Product Overview
2. OptiX RTN 980L IP LH (Integrated LH) Product Structure

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page5
 Network Application

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page6
 Equipment Components

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page7
 Cabinet
 Cabinet appearance  Configurations within a cabinet

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page8
 IDU 980L
Item Performance
Chassis height 5U
Pluggable Supported
Number of microwave 1-14
directions
RF configuration mode N+0 non-protection (N ≤ 14)
N+1 protection (N ≤ 11)
1+1 FD protection
XPIC configuration

Service interface type E1 interface

STM-1 optical/electrical interface
STM-4 optical interface
FE/GE optical/electrical interface
10GE optical interface

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page9
 IF Cable

1. RF coaxial cable connector, TNC, male

2. RF coaxial cable connector, Type N, male

 IF cable lengths for RFUs in a single cabinet

RFU Slot IF Cable Length (mm) RFU Slot IF Cable Length (mm)
01 3100 07 2500
02 2500 08 1600
03 3100 09 2000
04 2200 10 1400
05 2500 11 2000
06 2000 12 1400

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page10
 RFU
 Radio Frequency Unit (RFU) performs functions such as
frequency conversion and amplification of signals.

Dimension: 228 mm x 91 mm x 228 mm (width x depth x height)

Weight: ≤ 5.5 kg Power consumption: ≤ 50 W (RFU-SD)

≤ 45 W (RFU-NonSD)

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page11
 Ports on an RFU

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page12
 RFU Frequency Parameters
 The frequency parameters of RFU:
Type Modulation mode Frequency Band Channel Spacing
(GHz) (MHz)

XMC-LH QPSK/16QAM/32QAM/ L6/U6/7/8/11 28/40/56 MHz

RFU 64QAM/128QAM/ (U6/8/11 GHz)
256QAM/512QAM/ 28/56 MHz
1024QAM (L6/7 GHz)

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page13
 Product Label (RFU)
 The RFU parameters and type can
①: RFU type
be obtained from the RFU label ②: frequency band
③: diversity type

① ② ③

①
②
③

①: TX: transmit frequency range

②: RX: receive frequency range
③: Tx high/low station

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page14
 L-Shaped Adapter
 An L-shaped adapter converts the waveguide flange connectors
of RF ports on an RFU to coaxial connectors.

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page15
 Installation Method
 In the integrated long haul radio
solution, an RFU is installed in a
subrack of a cabinet through an L-
shaped adapter.

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page16
 Branching Unit
 A branching unit (BU) combines and divides RF signals, and
performs duplex isolation for received and transmitted signals.

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page17
 Branching Unit Appearance

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page18
 Branching Unit Installation Method
 An indoor BU is installed on a BU
subrack in a cabinet and provides
antenna-side ports on the top of the
cabinet through rigid waveguides.

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page19
 Product Label (Branching Unit )
A branching unit of indoor type

① frequency band
② channel spacing
① B: branching unit ③ channel configuration
② I: indoor ④ diversity type. NonSD: SD not
③ C: channel configuration supported, SD: SD supported
④ N: space diversity (SD) not supported, ⑤ number of channels
S: SD supported ⑥ maximum number of channels in full
⑤ number of channels configuration mode
⑥ maximum number of channels in full ⑦ TX high/low site: High: TX high site,
configuration mode. 6: 6+0, 8: 8+0 Low: TX low site

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page20
 Antenna
 Function: Directional transmission and reception of RF signals
 Main parameters: Frequency band, Diameter and Antenna gain
 Classification: Single-polarized and Dual-polarized antenna

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page21
 Waveguide
 Elliptical waveguide: used to connect a BU and an antenna that are far
away from each other
 Flexible waveguide: used to connect antenna feeder components
 Rigid waveguide: used to provide antenna-side ports on the top of the
cabinet

Elliptical waveguide Flexible waveguide Rigid waveguide

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page22
 RF Jumper
 An RF jumper connects an RFU and a BU to transmit/receive RF
signals.

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page23
 Longhaul Equipment Characteristics
 Supporting Hybrid/Packet integrated IP microwave
 The modulation mode and link capacity are set by software
 Built-in ADM provides flexible service add/drop function
 Providing microwave features: XPIC, AM, ATPC, 1+1 FD, SD
combination, N+1 protection, PLA/EPLA, AES
 Supporting SDH protection features: LMSP, 2f-RMSP, SNCP
 Supporting Ethernet protection such as ERPS, LAG and MSTP
 Supporting clock tracing, QoS, OAM

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page24
 Typical MW Link Configuration
 2+0 (ACCP, SD)  4+0/3+1 (ACAP/CCDP)

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page25
 Typical MW Link Configuration (Cont.)
 8+0/7+1 (ACCP)  8+0/7+1 (ACAP/CCDP, SD)

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page26
 Typical MW Link Configuration (Cont.)
 11+1/12+0 (ACAP/CCDP, SD)  16+0 (ACAP/CCDP, SD)

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page27
 Questions
 What are the components of OptiX RTN 980L? What are the
functions of them?

 What about the connection relation among the components?

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page28
 Contents
1. OptiX RTN 980L IP LH (Integrated LH) Product Overview
2. OptiX RTN 980L IP LH (Integrated LH) Product Structure

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page29
 Contents
2. OptiX RTN 980L IP LH (Integrated LH) Product Structure
2.1 IDU Structure and Architecture
2.2 IF Board
2.3 SDH Board
2.4 PDH Board
2.5 Ethernet Board
2.6 System Control, Switching, and Timing Board
2.7 Auxiliary/Power/Fan/TDM Connecting Unit Board
2.8 Traffic Flow

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page30
 IDU 980L Structure

IDU 980L appearance

and slot layout

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page31
 Software Structure
 RFU software, IDU software, and NMS software

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page32
 TDM/Packet Dual-Plane System
Architecture

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page33
 IF Board-ISV3
Name Board Type Valid Slots

ISV3 Receives and transmits 1xIF signals. Slot 1 - slot 14

Provides management channels to
RFU-NonSDs/RFU-SDs
Supplies -48 V power to RFU-NonSDs/RFU-SDs

 Front Panel
ODU power switch Indicator

IF interface XPIC interface

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page34
 IF Board-ISV3 (Cont.)
 Description of the indicators
Indicator Status Meaning
STAT On (green) The board is working normally
On (red) The board hardware is faulty
Off The board is not working
The board is not created
There is no power supplied to the board
SRV On (green) The services are normal and no alarms occur
On (red) A critical alarm or major alarm occurs in the services

On (yellow) A minor alarm or remote alarm occurs in the services

Off The services are not configured

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page35
 IF Performance-ISV3
 Service capacity (LH ACCP mode, XPIC disabled)
Ethernet Throughput (Mbit/s)
Maximum E1
Channel (STM-1) With L2+L3 With L2+L3
Modulation With L2 Frame
Spacing Number in Without Frame Header Frame Header
Mode Header
(MHz) Hybrid compression Compression Compression
microwave Compression (IPv4) (IPv6)

28 QPSK Strong 15 35 to 44 35 to 54 35 to 76 36 to 107

28 QPSK 18 41 to 51 41 to 63 41 to 89 42 to 125
28 16QAM Strong 33 70 to 89 71 to 109 72 to 154 73 to 217
28 16QAM 38 82 to 104 83 to 128 84 to 180 86 to 253
28 32QAM 49 105 to 134 106 to 163 108 to 231 110 to 324
28 64QAM 59 126 to 160 127 to 196 129 to 277 131 to 389
28 128QAM 75 (1) 157 to 198 158 to 243 160 to 342 163 to 481
28 256QAM 75 (1) 178 to 225 179 to 275 181 to 389 185 to 546
28 512QAM 75 (1) 190 to 240 191 to 294 194 to 415 197 to 583
28 512QAM Light 75 (1) 202 to 256 203 to 313 206 to 441 210 to 620
28 1024QAM* 75 (1) 213 to 270 215 to 330 217 to 466 221 to 654

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page36
 IF Board-ISM6
Name Board Type Valid Slots

ISM6 Receives and transmits 2xIF signals. Slot 1 - slot 14

Provides management channels to ODUs.
Supplies -48 V power to ODUs.

 Front Panel

Indicator IF interface IF interface

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page37
 IF Board-ISM6 (Cont.)
 Description of the indicators
Indicator Status Meaning
STAT On (green) The board is working normally
On (red) The board hardware is faulty
Off The board is not working
The board is not created
There is no power supplied to the board
SRV On (green) The services are normal and no alarms occur
On (red) A critical alarm or major alarm occurs in the services

On (yellow) A minor alarm or remote alarm occurs in the services

Off The services are not configured

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page38
 IF Performance-ISM6
 Integrated IP microwave (IS6 mode, E1 + Ethernet, non-XPIC)
Ethernet Throughput (Mbit/s)
Maximum E1
Channel With L2+L3 With L2+L3
Modulation Number in With L2 Frame
Spacing Without Frame Header Frame Header
Mode Hybrid Header
(MHz) Compression Compression Compression
Microwave Compression (IPv4) (IPv6)
56 (55) QPSK Strong 75 73 to 93 74 to 114 75 to 176 76 to 226
56 (55) QPSK 75 86 to 109 87 to 133 88 to 206 89 to 264
56 (55) 16QAM Strong 75 148 to 188 149 to 230 151 to 355 154 to 456
56 (55) 16QAM 35 173 to 220 175 to 268 177 to 414 180 to 532
56 (55) 32QAM 41 217 to 275 219 to 336 221 to 519 226 to 666
56 (55) 64QAM 71 273 to 346 275 to 423 279 to 653 284 to 838
56 (55) 128QAM 75 323 to 409 326 to 500 330 to 772 336 to 991
56 (55) 256QAM 75 373 to 473 376 to 578 381 to 891 388 to 1145
56 (55) 512QAM 75 417 to 528 420 to 645 425 to 996 433 to 1278
56 (55) 1024QAM 75 450 to 571 454 to 698 460 to 1076 468 to 1382
56 (55) 2048QAM 75 502 to 636 506 to 777 512 to 1199 522 to 1539

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page39
 IF Performance-ISM6 (Cont.)
 Service capacity (IS6 mode, E1 + Ethernet, XPIC disabled)
Ethernet Throughput (Mbit/s)
Maximum E1
Channel With L2+L3 With L2+L3
Modulation Number in With L2 Frame
Spacing Without Frame Header Frame Header
Mode Hybrid Header
(MHz) Compression Compression Compression
Microwave Compression (IPv4) (IPv6)
112 QPSK Strong 75 148 to 188 149 to 229 151 to 354 154 to 455
112 QPSK 75 173 to 219 174 to 268 177 to 414 180 to 531
112 16QAM Strong 75 298 to 377 300 to 461 304 to 712 310 to 914
112 16QAM 70 348 to 441 351 to 539 355 to 831 362 to 1067
112 32QAM 75 435 to 551 439 to 674 444 to 1040 453 to 1336
112 64QAM 75 548 to 694 552 to 848 559 to 1309 570 to 1680
112 128QAM 75 647 to 820 653 to 1003 661 to 1547 673 to 1987
112 256QAM 75 747 to 947 753 to 1158 763 to 1786 777 to 2293
112 512QAM 75 835 to 1058 841 to 1293 852 to 1995 868 to 2495

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page40
 SDH Board

Name Board Type Function Valid Slots

SL1DA 2xSTM-1 Uses the SFP module to Slot 1 - slot 6

interface board provide two STM-1
optical/electrical interfaces

CQ1 4-port Uses the SFP optical module Slot 1 - slot 14

channelized to provide four channelized
STM-1 STM-1 optical/electrical
processing interfaces
boards

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page41
 SDH Board (Cont.)
 Front Panel of the SL1DA (with optical /electrical ports)
SL1DA

CLASS1
LASER

SL1D
PRODUCT
LOS1
LOS2
STAT
SRV

TX1/RX1 TX2/RX2

Indicator Optical/electrical
interface

SL1D
A

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page42
 SDH Board (Cont.)
 Front Panel of a CQ1 board providing optical /electrical ports

OUT1 IN1 OUT2 IN2 OUT3 IN3 OUT4 IN4

CQ1
STAT

LOS1
LOS2
LOS3
LOS4
SRV

Indicator Optical/electrical
interface

OUT1 IN1 OUT2 IN2 OUT3 IN3 OUT4 IN4

CQ1
STAT

LOS1
LOS2
LOS3
LOS4
SRV

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page43
 Interface Performance of SDH Board
Item Performance
Nominal bit rate (Kbit/s) 155520
Classification code Ie-1 S-1.1 L-1.1 L-1.2
Fiber type Multi-mode Single-mode Single-mode Single-mode
fiber fiber fiber fiber
Transmission distance (km) 2 15 40 80
Operating wavelength (nm) 1270 to 1380 1261 to 1360 1263 to 1360 1480 to 1580
Mean launched power -19 to -14 -15 to -8 -5 to 0 -5 to 0
(dBm)
Receiver minimum -30 -28 -34 -34
sensitivity (dBm)
Minimum overload (dBm) -14 -8 -10 -10
Minimum extinction ratio 10 8.2 10 10
(dB)

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page44
 PDH Board

Name Board Type Function Valid Slots

SP3S 16×75Ω/120Ω E1 Receives and transmits 16xE1 Slot 1 - slot 14
tributary board signals
SP3D 32×75Ω/120Ω E1 Receives and transmits 32xE1
tributary board signals

ML1 16×Smart E1 Receives and transmits

service processing 16/32xE1 signals
board Supports flexible configuration
of E1 service categories, such
MD1 32×Smart E1 as CES E1, ATM/IMA E1, and
service processing fractional E1
board

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page45
 PDH Board (Cont.)
 Front Panel

SP3S

SP3D

ML1

MD1

Indicator E1 interface

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page46
 Ethernet Board
Name Board Type Function Valid Slots
EM6T 2xGE+4xFE Ethernet • Receives/transmits, process, and Slot 1 - slot 14
processing board converges 4 FE signals and 2 GE
signals
• Supports E-line and E-LAN services
EM6F 2xGE(SFP)+4xFE
Ethernet processing board

Indicator GE interface FE interface

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page47
 Ethernet Board (Cont.)
Name Board Type Function Valid Slots
EX1 1x10GE Ethernet • Receives/transmits, processes, and Slot 1 - slot 2
processing board converges 1x10GE service signals
• Supports E-line and E-LAN services
• Supports PWE3 Ethernet services
• Supports IEEE 1588 V2 feature
EG4/ 2-port RJ45/SFP • Provides four GE interfaces, of which Slot 1 - slot 14
EG4P + 2-port RJ45 two can be RJ45 GE electrical interfaces
Gigabit Ethernet or SFP GE optical interfaces, and the
interface board other two can be only RJ45 GE
electrical interfaces. The GE electrical
interfaces are compatible with the FE
electrical interfaces
• Supports synchronous Ethernet
• Supports IEEE 1588v2 feature
• Power over Ethernet (available only on
EG4P board)

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page48
 Ethernet Board (Cont.)
Name Board Type Function Valid Slots
EFP8 8-port FE • Encapsulates the Ethernet signals into E1 Slot 1 - slot 14
EoPDH signals, and transmits the Ethernet signals
processing on the PDH network
board with the • Supports EPL,EVPL,EPLAN and
switching EVPLAN services and Layer 2 switching
function services.

EMS6 4-port + 2-port • Supports the processing of EoSDH Slot 1 - slot 6

SFP FE/GE services.
EoSDH • Supports Ethernet transparent transmission
processing services and Layer 2 switching services.
board with the • Bridges to the packet plane through one
switching internal GE interface.
function

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page49
 Ethernet Board (Cont.)

EX1

EG4

EMS6

EFP8

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page50
 Ethernet Board (Cont.)
 Description of the indicators

Indicator Status Meaning

PROG On for 100 ms (green) and off When the board is being powered on or being reset,
for 100 ms repeatedly the software is being loaded to the flash memory
On for 300 ms (green) and off When the board is being powered on or being reset,
for 300 ms repeatedly the board software is in BIOS boot state
On (green) The upper layer software is being initialized
On for 100 ms (red) and off When the board is being powered on or being reset,
for 100 ms repeatedly
the BOOTROM self-check fails.
On (red) When the board is being powered on or being reset,
the memory self-check fails or loading the upper layer
software fails. When the board is running, the logic
file or upper layer software is lost.

Off The software is running normally

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page51
 Ethernet Board (Cont.)
 Description of the indicators (Cont.)

Indicator Status Meaning

LINK1/2 On (green) The GE1/2 interface is connected correctly and is not receiving or
(EM6F only) transmitting data.

Blinking (yellow) The GE1/2 interface is receiving or transmitting data.

Off The GE1/2 interface is not connected or is connected incorrectly.

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page52
 Ethernet Board (Cont.)
 Description of the indicators (Cont.)
Indicator Status Meaning
L/A1 On (green) Port GE1/2 is connected correctly and is not receiving or
L/A2 transmitting data.
(optical/
Blinks on (red) and off at 300 ms Port GE1/2 has received extremely high optical power
electrical
intervals (applicable only to an optical port).
port of
EG4 ) Blinks on (red) for 300 ms and off Port GE1/2 has received extremely low optical power
for 700 ms at 1000 ms intervals (applicable only to an optical port).
Blinking (yellow) Port GE1/2 is receiving or transmitting data.
Off Port GE1/2 is not connected or is connected incorrectly.

L/A3 On (green) Port GE3/4 is connected correctly but is not receiving or

L/A4 transmitting data.
(electrical Blinks (yellow) Port GE3/4 is receiving or transmitting data.
port of
EG4 ) Off Port GE3/4 is not connected or is incorrectly connected.

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page53
 Ethernet Board (Cont.)
 Description of the indicators (Cont.)

Indicator Status Meaning

LINK1/LINK2 On (green) The GE1/2 port is connected correctly.
(EMS6)
Blinks on (red) and off at The receive optical power at the GE1/2 optical port is
300 ms intervals higher than the upper threshold.
Blinks 300 ms on (red) The receive optical power at the GE1/2 optical port is
and 700 ms off lower than the lower threshold.
Off The GE1/2 port is not connected or is connected
incorrectly.
ACT1/ACT2 Blinking (yellow) The GE1/2 port is receiving or transmitting data.
(EMS6)
Off The GE1/2 port is not receiving or transmitting data.

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page54
 System Control, Switching, and Timing
Board
 General functions
 Full time-division cross-connection
 High capacity packet switching
 System control and communication
 Clock processing
 Providing auxiliary ports and management ports
 Service accessing and processing

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page55
 System Control, Switching, and Timing
Board (CSHL)
 CSHL is hybrid control, switching, and timing board.
 Supports 37 Gbit/s packet switching
 Higher order cross-connections: 128x128 VC-4s.
 Lower order cross-connections: Equivalent to 32x32 VC-4s

1. Indicators 2. Buttons 3. USB Ports

4. Clock ports, auxiliary 5. STM-1/4 ports (using SFP 6. GE/FE optical service ports
ports, management ports, modules) (using SFP optical modules)
and alarm ports
7. GE electrical service 8. Latches -
ports (fixed)

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page56
 System Control, Switching, and Timing
Board (CSHL) (Cont.)
 Description of the indicators on the CSHL
Indicator Status Meaning
L/A1-L/A2 On (green) The port is properly connected and is not
transmitting or receiving data.
On (red) An optical power alarm is reported (applicable
only to optical ports).
Blinks (yellow) The port is receiving or transmitting data.

Off The port is not connected or is incorrectly

connected.
CRIT On (red) A critical alarm occurs on the NE.
MAJ On (orange) A major alarm occurs on the NE.
MIN On (yellow) A minor alarm occurs on the NE.

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page57
 AUX Board
 Front Panel

 Description of the auxiliary ports

 F1/S1: Synchronous/Asynchronous data port
 PHONE: Orderwire phone port
 ALMI: Alarm input port
 ALMO: Alarm output port

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page58
 Power Board & Fan Unit
 PIU

FAN of IDU 980L

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page59
 Service Signal Processing Flow
 SDH Microwave

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page60
 Service Signal Processing Flow (Cont.)
 Hybrid Microwave

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page61
 Service Signal Processing Flow (Cont.)
 Packet Microwave

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page62
 Questions
 What types of services can be supported by OptiX RTN 980L? What
are the corresponding boards used for them?

 Which are the paired slots in IDU 980L ?

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page63
 Summary
 Equipment Structure of OptiX RTN 980L
 Main Characteristics of OptiX RTN 980L
 System Structure, Hardware Structure and Software Structure of
OptiX RTN 980L
 Board Functions and Signal Stream in the IDU of OptiX RTN
980L
 RFU and Branching Unit Features and Functions of OptiX RTN
980L

Copyright © 2016 Huawei Technologies Co., Ltd. All rights reserved.

Page64
Thank you
www.huawei.com