Scribd
Upload
25 views

6 Basic Drawing Tools 2

8

Uploaded by

Isaiah James Maano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
25 views

6 Basic Drawing Tools 2

8

Uploaded by

Isaiah James Maano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 19

TLE_ICT_TD10

TECHNICAL
DRAFTING

BY: EDUARDO E.
RONSAIRO
EXPECTATION
At the end of the learning period, you
are expected to:
1. enumerate some of the basic
commands of AutoCAD in Draw
toolbar;
2. describe the basic commands of
AutoCAD;
RECAP
Directions: Read each item carefully
and FILL IN the blank with the correct
answer.POLYGON
1. The __________ command creates an
equilateral closed polyline from 3
sides up to
POLYLINE 1024 sides.
2. A __________ is a connected series of
segments created as a single object
3. A POLYGON command requires
four inputs from the user, the
side
number of ______, a center point,
s
inscribed or circumscribed option,
and a point whichradiu determines the
s
_______ of its imaginary circle.

4. RECTANGLE
The _____________ command
creates a rectangular polyline
whose sides are vertical and
6.
7.

CIRCUMSCRIBE INSCRIBE
D POLYGON D
POLYGON
REMINDERS:
•Handle computer with extra care;
•No foods or drinks near the
computer;
•Keep your files in good order;
•Log off properly every after use;
•Unplug the computer when not in
use;
TOPIC: BASIC DRAWING TOOLS_2
In AutoCAD every time you create a
project, you always start with the draw
commands as the foundation of your
drawing.
Another Draw commands used in
creating objects are donut, ellipse,
arcs and circle.
TOPIC: BASIC DRAWING TOOLS
draw toolba
r
DRAW COMMANDS
5. DONUT
Creates a filled circle or an
object like a wide ring.
It is consisting of two arc
polyline segments that are
joined end to end to create
a circular shape.
DRAW COMMANDS
Command: DONUT or DO [enter]
Specify inside diameter of donut
<0.5000>: (or enter desired inside
diameter of Donut)
Specify outside diameter of donut
<1.0000>: (or enter desired outside
diameter of Donut)
Specify center of donut or <exit>:
(pick P1)
Specify center of donut or <exit>:
DRAW COMMANDS
6. CIRCLE
This command is used to
draw a circle using a center
point and a radius.
The common method is by
picking the center point and
then pick another point to
define OR enter the radius.
DRAW COMMANDS
Command:
CIRCLE or C [enter]
Specify center point for
circle or [3P/2P/Ttr (tan
tan radius)]: (pick P1)
Specify radius of circle or
[Diameter]: (pick P2 or
enter the desired radius)
DRAW COMMANDS
7. ARC
The Arc command is used to
draw arcs.
There are different ways to
create an arc, the default
and most common method is
by picking three points - a
start point, a second point
and an end point.
DRAW COMMANDS
Command: ARC or A [enter]
Specify start point of arc or
[Center]: (pick P1)
Specify second point of arc
or [Center/End]: (pick P2)
Specify end point of arc:
(pick P3)
Note: It is also possible to
create an arc by trimming a
DRAW COMMANDS
8. ELLIPSE
The Ellipse command gives
you an oval-like shape object
using different options.
One option is by specifying
the center point, the
endpoint of the first axis,
and the length of the second
axis.
DRAW COMMANDS
Command: ELLIPSE or EL
[enter]
Specify axis endpoint of
ellipse or [Arc/Center]: (pick
P1)
Specify another endpoint of
axis: (pick P2)
Specify
Note: Thedistance to other
ellipse command can also be
axis
used or
to [Rotation]: (pick
draw isometric P3)
circles.
THANK
YOU!
EVALUATION: IDENTIFICATION
1. - Ellipse 6. - Polyline

- Inscribed
2. - Circle 7.
polygon
3. - Arc 8.
-
4. - 9. Rectangle
Circumscribe
d polygon - Line
THANK
YOU!

You might also like