Scribd
Upload
17 views8 pages

Engg Materials Their Properties 13

Uploaded by

datamanagement396
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
17 views8 pages

Engg Materials Their Properties 13

Uploaded by

datamanagement396
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 8

ENGINEERING Properties of MATERIALS

The substances which are useful in the field of engineering are called
Engineering materials. A particular material is selected is on the basis of
following considerations

1. Properties of material
Mechanical properties - strength, ductility, toughness, hardness,
strength to weight ratio etc.
Physical properties - density, specific heat, thermal expansion,
conductivity , melting point etc.
Chemical properties - oxidation , corrosion, flammability, toxicity etc.
Manufacturing properties - formed, casting, machined, welding
MECHANICAL PROPERTIES
The characteristics of material that describe the behavior under the action
of external loads are referred as its mechanical properties. The common
mechanical properties are as follows
STRENGTH :
It is defined as the ability of a material to resist loads without failure.
It is usually expressed or measured in terms of maximum load per unit
area(i.e maximum stress or ultimate strength) that a material can withstand
failure and it varies according to the type of loading . Further the strength is
divided into three types they are
Tensile Strength:
The tensile strength or tenacity is defined as the ability of material to resist
a stretching (tensile) load without fracture.

Tensile strength
Compressive strength :
The ability of a material to resist squeezing (compressive) load without
fracture is called compressive strength.

Shear strength :
The ability of a material to resist transverse loads i.e. loads tending to
separate (or cut) the material is called shear strength.

STIFFNESS :
It is the ability of material to resist deformation or deflection under
load.
Within the elastic limit, stiffness is measured by the modulus of
elasticity.

Shear strength Compressive strength


ELASTICITY :
The ability of a material to deform under load and return to its original
shape when the load is removed is called elasticity.

PLASTICTY :
The ability of a material to deform under load and retain its new
shape when the load is removed is called plasticity.

DUCTILITY :
It is the ability of a material to be deformed plastically without rupture
under tensile load. Due to this property material can drawn out into fine
wire without fracture.

Ductility
MALLEABILTY :
It is the ability of a material to be deformed plastically without rupture
under compressive load. Due to this property metals are hammered and
rolled into thin sheets.

TOUGHNESS :
It is defined as the ability of the material to absorb energy up to fracture
during the plastic deformation. Toughness of a metal offers the resistance
to breaking when force is applied.

BRITTLENESS :
It is the property of sudden fracture without any visible permanent
deformation.

Malleability
HARDNESS :
It is defined as the ability of a material to resist scratching or indentation by
another hard body. Hardness is directly related to strength.

CREEP :
The slow and progressive deformation of a material with time at constant
stress is called creep.

FATIGUE :
Failure of material under repeated or reversal stresses is called fatigue.
Machine parts are frequently subjected to varying stresses and it is
important to know the strength of materials in such conditions. The
maximum stress at which the material will operate indefinitely without
failure is known as the endurance limit or fatigue limit.
RESILIENCE :
It is a property of material to absorb energy and to resist shock and impact
loads. It is measured by the amount of energy absorbed per unit volume
within the elastic limit.

MACHINABILITY:
The ease with which a given material may be worked or shaped with a
cutting tool is called machinability. Machinability depends on chemical
composition, structure and mechanical properties.

WELDABILITY:
It is the ability of material to be joined by welding. Weldability depends on
chemical composition, physical properties and heat treatment to which
they are subjected.
CASTABILITY :
Castability of metal refer to the ease with which it can be cast into different
shapes and is concerned with the behavior of metal in its molten state.

STRAIN HARDENING :
The strengthening effect produced in metals by plastic
deformation( cold working ) is called strain hardening or work hardening.
Strain hardening reduces ductility and corrosion resistance but, raises the
hardness and electrical resistance.

You might also like