New Pantera

Drilling module Spec.

  LF 1518/Hose reel Boom swing
 Standar feed 2o 30o

26o

Sandvik Mining and Construction

 Boom swing in horizontal position
2o 21o
 LF 1518/Hose reel
 Standar feed
 Feed extension in
rear position

1320

Sandvik Mining and Construction

 Feed swing in normal position

52o
56o

Sandvik Mining and Construction

 Feed swing in horizontal drilling position
20o

94o

Sandvik Mining and Construction

 Max. ramp angle to drill vertical holes

•Feed LF 1518
•Standar Ground pin
45o
with moveable drilling
guide
•Feed extension 1480
mm in rear position
•Boom ZB1550
•zoom 500 in max.
position

21o

Sandvik Mining and Construction

 Feed tilt angles

135o

13o

Sandvik Mining and Construction

 Max. Boom lift angles
3o

48o

6o

Sandvik Mining and Construction

 Ramp angle to drill vertical holes when
cabin is in horizontal position

10o

Sandvik Mining and Construction

 Horizontal drilling to right

Max. 3470 min. 1110

600

Front Jack
extension 400

Sandvik Mining and Construction

 Collaring height

1240 zoom out

840 zoom in

Sandvik Mining and Construction

 30o

2250

Sandvik Mining and Construction

 Coverage Area horizontal drilling
sideways

 Feed LF 1518
 Boom ZB 1550
 With longer
ground pin ( as
standarn)
5700

Peittoaloista
puuttuu kruunun
halkaisijan
500

puolikas, piiretty
keskiviivan
mukaan

Sandvik Mining and Construction

 Coverage Area Vertical drilling

108
0

1856

 Feed LF 1518
 Boom ZB 1550
 With longer
ground pin ( as
standarn)
Sandvik Mining and Construction
 Coverage Area Horizontal drilling,
forwards 1625

 Feed LF 1518

1780
 Boom ZB
1550
 With longer
ground pin
( as standarn)
4670

Sandvik Mining and Construction

 Coverage Area Vertical drilling

 Feed LF 1518
 Boom ZB 1550
 With longer
ground pin
( as standarn)

1700

4150

Sandvik Mining and Construction

  Feed LF 1520
 Boom ZB 1550
 With longer
ground pin
9770

3150
2680
8522
Sandvik Mining and Construction
 DIMENSIONS

2500
Sandvik Mining and Construction
 DIMENSIONS
 Minimum height
 without starter rod. Hose reel and rock drill in middle
position of the feed, transport support not in use
3150
2680

11000

Sandvik Mining and Construction

 DIMENSIONS

Sandvik Mining and Construction

 DIMENSIONS
 Feed LF 1518, and starter
rod 18 fd in rock drill and
transport support in use.
 Hose reel in Rear position

3700
10510

Sandvik Mining and Construction

 DIMENSIONS

2500

Sandvik Mining and Construction

 DIMENSIONS WHEN DRIVING

10500

3600
Sandvik Mining and Construction
 DIMENSIONS WHEN DRIVING

Sandvik Mining and Construction

 LF 1500 , Wire ropes

 Disc Springs
56x28,5x2 , 2+2 pcs

 You must tighten

the Wire Ropes
until the Springs
are together

Tighten Force 5379 N

Thickness distance 4*1,6mm=6,4 mm

Sandvik Mining and Construction

 Boom ZB 1550
 The new swing
piece in boom
bottom. Base
boom and lift
cylinder in same
support.

Sandvik Mining and Construction

 Boom ZB 1550

 Old model

Sandvik Mining and Construction

 Boom ZB 1550

 Bulk head as
standard in all
models

Sandvik Mining and Construction

 LF 1500 Hose Reel

 Easy to tighten
the Rock Drills
hoses with two
long M 20 bolts.
a nce
ist
i ngd
j ust
a d mm
140

Sandvik Mining and Construction

 LF 1500, the Rear Guides of Wire Rope

 There is two
Wire Guides
in Frame

Sandvik Mining and Construction

 LF 1500, the Rear Guides of Wire Rope

 Move the Guides to

sideward, when
changing the Wire
Ropes.

Sandvik Mining and Construction

 LF 1500, the Front Guides of Wire Rope

 There is two
Guides in
Frame , as in
old Pantera

Sandvik Mining and Construction

 Front wear pieces from cylinder Feed

 In top of Feed
Cylinder is two
wear pieces.
 To adjust wear
pieces open
little the bolts
and hit wear
piece to
sideward

Sandvik Mining and Construction

 Depth indicator assembly
 The continuous Cogged belt and Fraba Absolute encoder.
 The belt is fixed to the hose reel or to the frame of feed
cylinder in without hose reel models
 All models have this system as standard

Sandvik Mining and Construction

 Depth indicator assembly

 Sensor type:
 Fraba, Absolute
encoder, multi
turn, canopen,
Sandvik pin
layout

 Cogged belt HTD

LL 5M-15

 Flexible clutch

 Adjuster bolt

Sandvik Mining and Construction

 Depth indicator assembly

 Clamp
 Adjustability
2…12 mm

Sandvik Mining and Construction

 Depth indicator assembly

 Without
Hose Reel

Sandvik Mining and Construction

 Drilling and Rod Changer valves
•Dimensions:
-Weight about 270 kg

490

780
1 68
0

Sandvik Mining and Construction

 Drilling and Rod Changer valves
 Good
serviceability

Sandvik Mining and Construction

 RC 1514 and options valves
Drill Rod Guide
(option)
Rod Greasing (option)
Suction Head and oil heating valve Front Jack (option)
Retainer,Pito 15
Arms Rotation of
Rollers (option)
Lower Jaw/Rollers Movement of
Rollers (option)
Upper Jaw
Free Place Rod Greasing
Rotation of Air valve
Cassette (option)

Free place

Sandvik Mining and Construction

 Drilling Control Block

Rotation

Percussion

Feed

Power Extractor
(option)

Stabilizer
(option)

Sandvik Mining and Construction

 Drilling Control Block

Sandvik Mining and Construction

 The Sensors from the Rod Changer

 The rollers (option)

 The linear sensor for
movement from the
press cylinder.
 Type:
 Inductive linear
sensor
 0-120 mm

Sandvik Mining and Construction

 The Sensors from the Rod Changer

 Arms sensors
 Type
 Inductive proximity switch

 M 18

Sandvik Mining and Construction

 The Sensors from the Rod Changer

 Rotation of magazine
 Type
 Inductive proximity
switch
 M18

Sandvik Mining and Construction

 The Sensors from the Rod Changer

 Fixed jaw selector

 The linear sensor for
movement from the
press cylinder
 Type
 Inductive linear sensor
 0-120 mm

Sandvik Mining and Construction

 The Sensors from the Rod Changer

 The rod sensor

 Type
 Inductive
proximity switch
 M30

Not use yet, but must test , is it

necessary or not

Sandvik Mining and Construction

 The Sensors from the Rod Changer

 Sensor box for

all sensors in
rod changer

Sandvik Mining and Construction

 LF 1518/RC1514 with Hose reel
230, with longer groun pin Rock drill travel 4980

12 ft or 14 ft
Hose Reel

7145
8160
Starter rod 18 ft
9160

4750
Not in use in production , allways
when you want to use the Hose
reel , you must select the long
(+610mm) feed beam, LF 1520.
Sandvik Mining and Construction
 LF 1520/RC1514 with Hose reel
306, with longer ground pin Rock drill travel 5660
155, with shorter ground pin 12 ft or 14 ft

Hose reel

7755
8770
Starter rod 20 ft
9770

Moveable Rod Guide only with

longer ground pin

5354 with longer ground pin

5505 with shorter ground pin

Sandvik Mining and Construction

 LF 1518/RC1514 without Hose reel
180, with longer ground pin Rock drill travel 5580
12 ft or 14 ft

7145
7700
Starter rod 20 ft
8700

5400 with longer ground pin

Sandvik Mining and Construction

 CF 1524/RC1514 with Hose reel
337, with longer ground pin
186, with shorter ground pin
12 ft or 14 ft Rock drill travel 6816

9760
9940
starter rod 7320 , 24 Feed
10790

6630 with shorter ground pin

6480 with longer ground pin

Sandvik Mining and Construction

 RC 1514
 Two Models
 Without Rollers , standar

 with Rollers, option,

use only with rods 45,51 or
60 mm

Sandvik Mining and Construction

 RC 1514
 Drill steels
 45, 51 and 60 ( 1 ¾”- 2 3/8” ) ,
extension and MF-rods
 Tube sizes 3” and 3 ½”
 Lenght 12 ft or 14 ft
1
 capacity 7 pcs in magazine 2
and 1 pc in Rock Drill 7
3

4
6 5

Sandvik Mining and Construction

 RC 1514
 Possibility to use 12 Feed Rods , Rod Box
12 feeds and 14 in bottom position
feeds rods and
tubes

 Place of Fixed rod

selectors and feed
plates depent on 14 Feed Rods , Rod Box
rod or tube types in top position

Sandvik Mining and Construction

 40/25 Cylinders
 New design

Sandvik Mining and Construction

 SUCTION HEAD

 New Ground Pin

for Soft ground

Sandvik Mining and Construction