Looping

Looping in C++ Nita Arora (KHMS)

The Increment and Decrement Operators Introduction to Loops: The while Loop Using the while loop for Input Validation Counters The do-while loop The for loop Keeping a Running Total 5-

Sentinels Nested Loops Breaking Out of a Loop The continue Statement Creating Good Test Data 5-

++ adds one to a variable val++; is the same as val = val + 1; -- subtracts one from a variable val--; is the same as val = val – 1; can be used in prefix mode (before) or postfix mode (after) a variable 5-

++val and --val increment or decrement the variable, then return the new value of the variable. It is this returned new value of the variable that is used in any other operations within the same statement 5-

int x = 1, y = 1; x = ++y; // y is incremented to 2 // Then 2 is assigned to x cout << x << " " << y; // Displays 2 2 x = --y; // y is decremented to 1 // Then 1 is assigned to x cout << x << " " << y; // Displays 1 1 5-

val++ and val-- return the old value of the variable, then increment or decrement the variable It is this returned old value of the variable that is used in any other operations within the same statement 5-

int x = 1, y = 1; x = y++; // y++ returns a 1 first // The 1 is assigned to x // then y is incremented to 2 cout << x << " " << y; // Displays 1 2 x = y--; // y-- returns a 2 // The 2 is assigned to x // then y is decremented to 1 cout << x << " " << y; // Displays 2 1 5-

Can be used in arithmetic expressions result = num1++ + --num2; Must be applied to something that has a location in memory. Cannot have result = (num1 + num2)++; // Illegal Can be used in relational expressions if (++num > limit)‏ prefix- and postfix-operations will cause different comparisons 5-

5- Loop : part of program that may execute more than once (i.e., it repeats)‏ while loop format: while ( condition )‏ { statement(s) ; } The {} can be omitted if there is only one statement in the body of the loop No ; here

while ( condition )‏ { statement(s) ; } condition is evaluated if it is true, the statement(s) are executed, and then condition is evaluated again if it is false, the loop is exited 5-

5- true statement(s)‏ false condition

int val = 5; while (val >= 0)‏ { cout << val << " "; val--; } produces output: 5 4 3 2 1 0 5-

while is a pretest loop ( condition is evaluated before the loop executes) ( Entry Control Loop ) If the condition is initially false, the statement(s) in the body of the loop are never executed If the condition is initially true, the statement(s) in the body continue to be executed until the condition becomes false 5-

The loop must contain code to allow condition to eventually become false so the loop can be exited Otherwise, you have an infinite loop (i.e., a loop that does not stop)‏ Example infinite loop: x = 5; while (x > 0) // infinite loop because cout << x; // x is always > 0 5-

Loops are an appropriate structure for validating user input data Prompt and read in the data. Use a while loop to test if data is valid. Enter the loop only if data is not valid. Inside the loop, prompt the user to re-enter the data. The loop will not be exited until valid data has been entered. 5-

cout << "Enter a number (1-100) and" << " I will guess it. "; cin >> number; while (number < 1 || number > 100)‏ { cout << "Number must be between 1 and 100." << " Re-enter your number. "; cin >> number; } // Code to use the valid number goes here. 5-

Counter : variable that is incremented or decremented each time a loop repeats Can be used to control execution of the loop ( loop control variable )‏ Must be initialized before entering loop May be incremented/decremented either inside the loop or in the loop test 5-

Program can be written so that user input determines loop repetition Can be used when program processes a list of items, and user knows the number of items User is prompted before loop. Their input is used to control the number of repetitions 5-

int num, limit; cout << "Table of squares\n"; cout << "How high to go? "; cin >> limit; cout << "\n\nnumber square\n"; num = 1; // loop control variable while (num <= limit)‏ { cout << setw(5) << num << setw(6)‏ << num*num << endl; num++; } 5-

do-while : a post test loop ( condition is evaluated after the loop executes)‏ Format: do { 1 or more statements; } while ( condition ); 5- Notice the required ;

5- statement(s)‏ condition false true

Loop always executes at least once Execution continues as long as condition is true ; The loop is exited when condition becomes false Useful in menu-driven programs to bring user back to menu to make another choice 5-

5- Pretest loop that executes zero or more times Useful for counter-controlled loop Format: for( initialization ; test ; update )‏ { 1 or more statements; } No ; goes here Required ;

for( initialization ; test ; update )‏ { // {} may be omitted statement(s) ; // if loop body contains } // only 1 statement Perform initialization Evaluate test expression : (a) If true , execute statement(s)‏ (b) If false , terminate loop execution Execute update , then re-evaluate test expression 5-

5- true statement(s)‏ false test initialization code update code

int sum = 0, num; for (num = 1; num <= 10; num++)‏ sum += num; cout << "Sum of numbers 1 – 10 is " << sum << endl; 5-

If test is false the first time it is evaluated, the body of the loop will not be executed The update expression can increment or decrement by any amount Variables used in the initialization section should not be modified in the body of the loop 5-

Can define variables in initialization code Their scope is the for loop Initialization code, test, or update code can contain more than one statement Separate statements with commas Example: for (int sum = 0, num = 1; num <= 10; num++)‏ sum += num; 5-

Can omit initialization if already done int sum = 0, num = 1; for (; num <= 10; num++)‏ sum += num; Can omit update if done in loop for (sum = 0, num = 1; num <= 10;)‏ sum += num++; Can omit test – may cause an infinite loop for (sum = 0, num = 1; ; num++)‏ sum += num; 5-

running total : accumulated sum of numbers from each repetition of loop accumulator : variable that holds running total int sum = 0, num = 1; // sum is the while (num <= 10) // accumulator { sum += num; num++; } cout << "Sum of numbers 1 – 10 is " << sum << endl; 5-

Sentinel : value in a list of values that indicates end of data Special value that cannot be confused with a valid value, e.g. , -999 for a test score Used to terminate input when user may not know how many values will be entered 5-

int total = 0; cout << "Enter points earned " << "(or -1 to quit): "; cin >> points; while (points != -1) // -1 is sentinel { total += points; cout << "Enter points earned: "; cin >> points; } 5-

while : pretest loop (loop body may not be executed at all)‏ do-while : post test loop (loop body will always be executed at least once)‏ for : pretest loop (loop body may not be executed at all); has initialization and update code; is useful with counters or if precise number of repetitions is known 5-

A nested loop is a loop inside the body of another loop Example: for (row = 1; row <= 3; row++)‏ { for (col = 1; col <= 3; col++)‏ { cout << row * col << endl; } } 5- inner loop outer loop

Inner loop goes through all its repetitions for each repetition of outer loop Inner loop repetitions complete sooner than outer loop Total number of repetitions for inner loop is product of number of repetitions of the two loops. In previous example, inner loop repeats 9 times 5-

Can use break to terminate execution of a loop Use sparingly if at all – makes code harder to understand When used in an inner loop , terminates that loop only and goes back to outer loop 5-

Can use continue to go to end of loop and prepare for next repetition while and do-while loops go to test and repeat the loop if test condition is true for loop goes to update step, then tests, and repeats loop if test condition is true Use sparingly – like break , can make Program logic hard to follow 5-

When testing a program, the quality of the test data is more important than the quantity. Test data should show how different parts of the program execute Test data should evaluate how program handles: normal data data that is at the limits of the valid range invalid data 5-

Write a Program which takes a single integer "height" and displays a "pyramid" of this height made up of of "*" characters on the screen. The program, should be able to reproduce the following example output: This program prints a 'pyramid' shape of a specified height on the screen. how high would you like the pyramid?: 37 Pick another height (must be between 1 and 30):5 ** **** ****** ******** ********** Question 1

Question 2 "For" loops can always be re-written as "while" loops, and vice-versa. Are the following two programs equivalent, and what is their output? Explain your answer, and run the programs to check. Program (a): #include <iostream.h> int main() { int count = 1; for (; count <= 5 ; count++) { int count = 1; cout << count << "\n"; } return 0; } Program (b): #include <iostream> int main() { int count = 1; while (count <= 5) { int count = 1; cout << count << "\n"; count++; } return 0; }

Looping

More Related Content

What's hot (20)

Viewers also liked (20)

Similar to Looping (20)

More from Kulachi Hansraj Model School Ashok Vihar (9)

Recently uploaded (20)

Looping