Chapter 7 affordances
Download as DOC, PDF5 likes7,986 views
This chapter defines affordances and discusses their use in describing technologies. It outlines Gibson's original definition of affordances as objective properties in the environment related to an actor's abilities. Norman later adapted the term for human-computer interaction to include perceived properties. The chapter discusses debates around affordances and proposes they are useful for understanding how technologies enable actions and should be designed to maximize both usefulness and usability.
![Collaboration
Collaborative learning is an important aspect of socially situated learning. Inherent is the notion that
learning with and through others is an important and valuable form of learning, particularly in to-
day’s educational context, where the focus is on knowledge co-construction rather than information
recall.
It is important to distinguish between collaboration and cooperation. Jones et al. (2007) consider the
two terms as follows. They cite Topping’s definition of cooperation as:
←CO- means together in company, jointly, in common, equally, mutually, reciprocally, while -OPERATE means to
work, act, influence, effect, accomplish, cause or carry out( Topping, 1992: 151).
In terms of collaboration, they reference Kaye who defined collaborate in a remarkably similar way.
Etymologically, to collaborate (co-labore) means work together, which implies a concept of
shared goals, and an explicit attempt to ‘add value’ - to create something new or different
through the collaboration as opposed to simply exchanging information or passing instructions.
(Kaye, 1992: 2)
Dillenbourg (1999) defined collaborative learning as:
a situation in which two or more people learn or attempt to learn something together. (Dillenbourg
1999 p2 emphasis in original).
Jones et al. (2007) see co-operation as been applied more to a division of labour in which individu-
als achieve their aims by mutual assistance, whereas collaboration implies a stronger commitment
to joint aims as well as mutual assistance.
New technologies have opened up the possibility of new forms of dialogue and communication.
ICT offers the potential to develop new forms of online communities and new means of communic-
ating and sharing information, from signing up to particular mailing lists through to involvement in
specialised discussion forums and chat rooms.
Collaboration can be promoted through a range of technologies. For example action sets can be set
up in a discussion forum, which the students then use to work together on a shared project, using
the space to share and discuss ideas. Similarly a wiki can be used as a space to support joint project
writing. Social bookmarking sites can be used by a cohort as a means of aggregating a shared set of
resources.
Reflection
The importance of reflection can be traced back to the seminar work of Dewey (1933; 1916; 1938;
1949). Dyke et al. (2007) reference Dewey’s definition of the term. They argue that Dewey con-
trasts reflective thought with reliance on instruction and the mere transmission of received wisdoms
and defines reflection as:
[A] better way of thinking that … is called reflective thinking: the kind of thinking
that consists of turning a subject over in the mind and giving it serious and consecu-
tive thought. Dewey 1938:113).
Dewey also stated that:
The function of reflective thought is therefore to transform a situation in which there
is experienced obscurity, doubt, conflict, disturbance of some sort, into a situation
that is clear, coherent, settled, harmonious. (Dewey 1933:195).
Asynchronous communication tools, such as forums have long been considered to offer opportunit-
ies to support student reflection. Whether the forums are used in a semi-structured and moderated](https://image.slidesharecdn.com/chapter7affordances-110505094819-phpapp01/85/Chapter-7-affordances-5-320.jpg)
Chapter 7 affordances
- 1. Chapter 7 - Affordances Chapter 7 - Affordances...............................................................................................................................1 Introduction..................................................................................................................................................1 Definitions of the term..................................................................................................................................1 Gibson’s affordances Norman’s affordances ICT affordances...........................................................................................................................................4 Collaboration Reflection Interaction Dialogue Creativity Organisation Inquiry Authenticity Negative affordances - constraints Conclusion...................................................................................................................................................9 Introduction This chapter will define the term affordances, starting from its original use in an Ecological context, through to its use in Human Computer Interactions (HCI). It will then consider how the term can be used to describe the characteristics of technologies, along with illustrative examples. Although the term is contested, I will argue that it is valuable in that it accurately describes the ways in which the inherent characteristics of different technologies can be instantiated in different context, and through the different preferences of individuals and how they interact with technologies. The chap- ter will describe how the term affordances can be used to help develop a better understanding of the characteristics of different technologies. Definitions of the term Gibson (1977, 1979) defined the term affordances in an ecological context in relation to visual per- ception. He argues that affordances in an environment lead to some course of action. Affordances are perceived by an individual and are culturally based. Gaved (1991) argues that the action percep- tion of affordances will be in part determined by the observer’s culture, social setting, experience and intentions. For example a button has an affordance of pushing, a know is for turning and han- dles are for pushing. He defined affordances as ←all "action possibilities" latent in the environment, objectively measurable and independent of the indi- vidual's ability to recognize them, but always in relation to the actor and therefore dependent on their capa- bilities. ← For example, a tall tree has the affordance of food for a giraffe because it has a long next, but not for a sheep, or a set of stairs has an affordance of climbing for an walking adult but not for a crawl- ing infant. Therefore affordances are always in relation to an individual and their capabilities, this also include the individuals part experience, values, beliefs, skills and perceptions. Therefore a but- ton may not have the affordance of pushing if an individual has no cultural context or understanding of the notion of buttons or related objects and what they are for. He also argued that The affordances of the environment are what it offers the animal, what it provides or furnishes, ei- ther for good or ill. (Gibson, 1979: 127) He goes on to argue that it implies a complementarity between the animal and the environment. Sa- lomon describes Gibson’s concept of affordances as follows.
- 2. ”Affordance” refers to the perceived and actual properties of a thing, primarily those func- tional properties that determine just how the thing could possibly be used. (Salomon, 1993, pg 51) Therefore affordances are properties of the world that are compatible with and relevant for people’s actions (Gaver, 1991). Weiser and Seely Brown offer the following definition: An affordance is a relationship between an object in the world and the intentions, perceptions, and capabilities of a person. The side of a door that only pushes out affords this action by offering a flat pushplate. The idea of affordance, powerful as it is, tends to describe the surface of a design. For us the term "affordance" does not reach far enough into the periphery where a design must be attuned to but not attended to. McGrenere and Ho identify three properties of affordances (McGrenere and Ho, 2000): 1. An affordance exists relative to the action capabilities of a particular actor. 2. The existence of an affordance is independent of the actor’s ability to perceive it. 3. An affordance does not change as the needs and goals of the actor change. The term was adapted by Norman for use in an HCI context. His interest was in how the affor- dances of everyday objects could either enhance or restrict their accessibility. He was interested in using the concept to support the better design of objects to accomplish particular functions. He de- fined it as: When used in this sense, the term affordance refers to the perceived and actual properties of the thing, primarily those fundamental properties that determine just how the thing could possibly be used. A chair affords ("is for") support, and, therefore, affords sitting. Norman was interested in design and in particular with making affordances salient so that users could easily perceive them. McGrenere and Ho (2000) distinguish between the utility of an object (i.e. the actions it affords for the user) from the usability of the object (i.e. the perceptual informa- tion that signals its affordances). Norman considers both perceived and actual properties and im- plies that a perceived property may or may not be an actual property, but regardless, it is an affor- dance. Thus, he deviates from Gibson in that perception by an individual may be involved in char- acterizing the existence of the affordance. Gaver (1991) identifies three types of affordances: perceptible, hidden and false. Perceptible affor- dances are those where there is perceptual information for the affordance. Hidden affordances are those where there is no information for the affordance (for example a hidden door in a panel). Final- ly false affordances are those which can result in a false action. McGrenere and Ho (2000) consider affordances in terms of two dimensions, i) the ease with which an affordance can be undertaken and ii) the clarity of the information that describes the existing af- fordance; each being a continuum. They state that the goal of design is to first maximise the neces-
- 3. sary affordances and then maximum each of these dimensions (Figure 1). Degree of perceptual information Increasingly clear information Improvements in design that maximize both dimensions Figure 1: McGrenere and Ho’s digram representing the affordance and the information that spe- cifies the affordance as a continuum Boyle and Cook argue that although the term affordances is potentially rich, it is also contested. Drawing on McGrenere and Ho (2000) they argue that there is considerable ambiguity and confu- sion in the use of the term. Whilst this is true, I would argue that the use of affordances as a means of describing the relationship between technologies and users and in particular resultant actions is useful. The next section will consider the types of affordances of technologies and provide an exam- ple of how they can be used as a means of guiding the design of a learning intervention. McGrenere and Ho’s article (McGrenere and Ho, 2000) goes some way towards articulating the different uses of the term by Gibson and Norman. Table 1 summarises the main differences. Gibson’s affordances Norman’s affordances Action possibilities in the environment in Perceived properties that may not actually exist relation to the action capabilities of an actor Independent of the actor’s experience, Suggestions or clues as to how to use the proper- knowledge, culture or ability to perceive ties Existence is binary - an affordance exists or Can be dependent on the experience, knowledge it does not exist or culture of the actor Can make an action difficult or easy Drawing on this work, Soegaard (2010) argues that clarifying:
- 4. ←The distinction between Gibson’s and Norman’s sense of affordances allows us to distinguish between the utility/usefulness and the usability of an object. We both design for usefulness by creating affordances (the possibilities for action in the design) that match the goals of the user (the relativity of the affordance vis-à-vis the user) and we improve the usability by designing the information that specifies the affordances (perceptual information as shadows on buttons to afford clickability etc.). ICT affordances Specifically in relation to Information and Communities Technologies (ICT), Conole and Dyke (2004) propose the following types of ICT affordances: accessibility, speed of change, diversity, communication and collaboration, reflection, multi-model and non-linear, risk, fragility and uncer- tainty, immediacy, monopolisation and surveillance. They argue that the taxonomy has a number of uses. Firstly, that establishing a clearer understanding of the affordances should help to inform prac- titioners in their use of particular technologies to achieve particular goals. Secondly, that it can also help to identify potential limitations and inappropriate uses of the technologies. Thirdly, by making the inherent affordances of technologies explicit, the taxonomy can act as a discussion point for cri- tique and further refinement. Fourthly, it can be used as a checklist to help practitioners understand costs and benefits of different technologies. Fifthly, it can be used as a mechanism for staff devel- opment and improving practice – for example, by providing a checklist of potential benefits and draw backs of different technologies which can be used to inform choice and the ways that practi- tioners might choose to use them. Similarly Gaver (1991) argues that affordances can be used as a way of focussing on the strengths and weaknesses of technologies with respect to the possibilities they offer the people that might use them. Conole and Dyke (2004) were interested in exploring the relationship between the infrastructure of information and communication technologies and people’s use of those technologies. In particular, what uses do technologies invites and facilitates, what do they lend themselves to and in what ways can they be used to promote particular types of learning? They were interested in exploring the cre- ative and innovative way people respond to technologies and perhaps adapt them for use in unfore- seen circumstances. Whilst each of this is useful in terms of describing ICT and how they can be used, on reflection I now feel that now all of them are affordances in the Gibsonian sense. More recently I have identi- fied a set of positive and negative affordances, specifically in relation to the use of technologies in the design of learning interventions. Positive affordances include: collaboration, reflection, interac- tion, dialogue, creativity, organisation, inquiry and authenticity. Negative affordances include: time consuming (in terms of development), difficult to use, costly to produce, time consuming (in terms of support), assessment issues, lack of interactivity, and difficult to navigate. I will now go on to de- scribe each of positive affordances in term and give examples of technologies that support them, and will then briefly discuss the negative affordances which are essential pragmatic constraints that need to be addressed rather than mechanisms for supporting particular forms of learning per se. Identification of these positive and negative affordances can then be used as a means of making in- formed designed decisions in terms of using a particular technology in a specific learning context. For example, to promote student reflection, the affordances check list can be used in terms of con- sidering the extent to which different tools might promote this. So for example a wiki in this context has the following positive affordance: reflection (to an extent), however arguably a blog has a stronger affordance of reflection and is also better in terms of organisation and dialogue (as if the blog is public others are able to comment on posts). In terms of negative affordances a wiki is ar- guably difficult to use. Therefore the checklist in this context might result in the teacher decided to use a blog rather than a wiki.
- 5. Collaboration Collaborative learning is an important aspect of socially situated learning. Inherent is the notion that learning with and through others is an important and valuable form of learning, particularly in to- day’s educational context, where the focus is on knowledge co-construction rather than information recall. It is important to distinguish between collaboration and cooperation. Jones et al. (2007) consider the two terms as follows. They cite Topping’s definition of cooperation as: ←CO- means together in company, jointly, in common, equally, mutually, reciprocally, while -OPERATE means to work, act, influence, effect, accomplish, cause or carry out( Topping, 1992: 151). In terms of collaboration, they reference Kaye who defined collaborate in a remarkably similar way. Etymologically, to collaborate (co-labore) means work together, which implies a concept of shared goals, and an explicit attempt to ‘add value’ - to create something new or different through the collaboration as opposed to simply exchanging information or passing instructions. (Kaye, 1992: 2) Dillenbourg (1999) defined collaborative learning as: a situation in which two or more people learn or attempt to learn something together. (Dillenbourg 1999 p2 emphasis in original). Jones et al. (2007) see co-operation as been applied more to a division of labour in which individu- als achieve their aims by mutual assistance, whereas collaboration implies a stronger commitment to joint aims as well as mutual assistance. New technologies have opened up the possibility of new forms of dialogue and communication. ICT offers the potential to develop new forms of online communities and new means of communic- ating and sharing information, from signing up to particular mailing lists through to involvement in specialised discussion forums and chat rooms. Collaboration can be promoted through a range of technologies. For example action sets can be set up in a discussion forum, which the students then use to work together on a shared project, using the space to share and discuss ideas. Similarly a wiki can be used as a space to support joint project writing. Social bookmarking sites can be used by a cohort as a means of aggregating a shared set of resources. Reflection The importance of reflection can be traced back to the seminar work of Dewey (1933; 1916; 1938; 1949). Dyke et al. (2007) reference Dewey’s definition of the term. They argue that Dewey con- trasts reflective thought with reliance on instruction and the mere transmission of received wisdoms and defines reflection as: [A] better way of thinking that … is called reflective thinking: the kind of thinking that consists of turning a subject over in the mind and giving it serious and consecu- tive thought. Dewey 1938:113). Dewey also stated that: The function of reflective thought is therefore to transform a situation in which there is experienced obscurity, doubt, conflict, disturbance of some sort, into a situation that is clear, coherent, settled, harmonious. (Dewey 1933:195). Asynchronous communication tools, such as forums have long been considered to offer opportunit- ies to support student reflection. Whether the forums are used in a semi-structured and moderated
- 6. way or more openly as a space for students to share and discuss ideas. They provide a space for stu- dent to reflect and critique, where students can engage in discussion over a longer timeframe than is possible with face-to-face discussions. They can be used to augment face-to-face discussion provid- ing a space for students to reflection on in classroom debates. Blogs can be used very effectively as a means of promoting reflection. For example students can be asked to keep a reflective blog, which can be shared with the teacher, other students or more broadly. This is particularly useful in professional courses, where it is important for students to gain a clearer understanding of the theory they are learning and its relationship to professional practice. For example when trainee teachers are on placement in schools keeping a reflective blog of their experience and its relation to educational theory can be very effective. Interaction One of the often cited benefits of new technologies is the way in which it can promote a range of in- teractions. The nature of interaction in online spaces is discussed in more detail in chapter 13. I am using the term interaction here in terms of the interaction between users and the technologies. It is concerned with the extent to which the user can manipulate their environment. Wagner defines in- teraction as follows: ‘Interaction can be defined as: ‘Interactions occur when these objects and events mutually influence one another. An instructional interaction is an event that takes place between a learner and the learner's environment. Its purpose is to respond to the learner in a way inten- ded to change his or her behavior toward and educational goal. Instructional interactions have two purposes: to change learners and to move them toward achieving their goals (Wagner, 1994).. Siemens argues that interaction is essential for effective learning. Similarly Dyke et al. (2007) see interaction as one of the key aspects of effective learning, along with learning through thinking and reflection, from experience and activity and through conversation. Dyke et al. (2007) suggest that the non-linearity of the web leads to the potential for different routes through, and forms of, learning. They argue that ICT enables the learner to move beyond linear pathways of learning, characteristic of, but not exclusive to, behaviourist approaches, and to adopt more individualised strategies and pathways. Another affordance of ICT is the potential for multi- modal and non-linear approaches to learning. Multimedia tools provide a way of giving learners not just access to materials but also means of in- teracting with the materials, Examples might include virtual simulations, where learners can change variables and see the effect on a model of say an ecological system. E-Assessment tools can allow students to test out their understanding of a topic through a range of different types of online assess- ment questions types. The system can then provide either instant feedback or forward the results for a teacher to provide feedback later. Clearly publishing tools such as blogs and wikis enable user- generated content, providing the user with the ability to produce user-generated content. In addition there are now a range of tools that can allow users to mix and match different functionality, such as mash up tools. Gaming environments and virtual worlds allow the user to interact in a specialised space. User actions in games for example will result in particular paths through the gaming material to be taken. In virtual worlds it is also possible for users to acquire or even build new objects. Dialogue Learning through discussion with others is an important and well recognised aspect of learning, go- ing back to Vygosky’s work (Vugotsky, 1986). New technologies have opened up the possibility of new forms of dialogue and communication. ICT offers the potential to develop new forms of online communities and new means of communic-
- 7. ating and sharing information, from signing up to particular mailing lists through to involvement in specialised discussion forums and chat rooms. New technologies provide a plethora of ways in which learners can communicate with their peers, their teachers and others beyond the course co- hort. Tools such as Twitter provide learners potentially with access to an international community of others with shared interests, providing the opportunity for just-in-time learning. As a learner of Spanish I have used Twitter extensively in this respect. If I post a tweet on something I don’t under- stand (for example the use of the verbs ser and estar in a particular context) I will invariably get a near instant response from a number of people. providing me with different explanations of which term should be used and when. Similarly peer critiquing via blogs provides a mechanism for others to comment on thoughts and ideas. Indeed this is a technique I have used in the process of writing this book, in that I have posted draft chapters which others have then provided comments on. Synchronous communication tools, such as chat tools, and audio and video conferencing provide a different forum for debate and discussion and can be used in a variety of ways, to come to an agreed consensus on something, to discuss issues, to brainstorm ideas or as a backchannel to sup- port events. In chapter 14 for example I described the way in which the conferencing tool Ellumin- ate was used in conjunction with the social networking site, Cloudworks, to provide a rich interact- ive environment for discussion and debate. Creativity Sorenson et al. (2010) argue that creativity is a key digital literacy skill that learners need to devel- op. They cite Runco (1996) who argues that: ←creative thinking reflects the original interpretation of experience (Runco, 1996). Each of us has the capacity to construct original interpretations, and if it is a useful and original interpretation, it qualifies as “creative.” That is how creativity is typically defined, as both useful and original (Barron, 1955; Runco, 1988). ← Runco (2008) also argued that creative potential should be a primary concern for educators and that educators need to recognise that creativity is widely distributed, virtually every individual has the mental capacity to construct the personal interpretations that are involved. The term creativity is derived from the latin term ‘creo’ meaning to create or make. It is about mak- ing something new (either a physical artefact or a concept) that is novel and valuable. It is about the ability to transcend traditional ideas, rules, partners, relationships and create meaningful new ideas, forms, methods and interpretations. It is important because it is an essential skill, needed to deal with today’s complex, fast changing society. Furthermore it is evident that it can be promoted through discourse and collaboration that are mediated through a range of social and participatory media. Wallas (1928) identified the following five stages of creativity: • Preparation - identifying the problem •Incubation - internalisation of the problem •Intimation - getting a feeling for a solution •Illumination - creativity burst forth •Verification - the idea is consciously verified, elaborated and applied. Technologies can be used in a variety of ways to support creativity. The can promote creativity in new and innovation ways. They can enable new forms of discourse, collaboration and cooperation. They can provide users with access to knowledge, that can be repurposed or represented via differ- ent forms of representation. New social and participatory media, in particular enable the aggrega- tion and scaling of information; distributed and collective.
- 8. Sorenson et al.’s (2010) special issue of EURODL is exploring the ways in which creativity can be promoted through the use of OER. In the call for papers they argue: In this special issue we are interested in exploring in more depth the nature of creativity and how this might be understood and used to better harness the potential of OER. In related work we have explored how altern- ative theoretical perspectives such as drama might influence our imagination in relation to how we use OER (Sorensen 2010), and how the use of collaborative pedagogical patterns might be used to support use of OER in collaborative learning contexts (Conole et al. 2010). Other social and participatory media can also be used to promote creativity by representing knowl- edge in different ways, enabling learners to connect with others globally and by providing multiple, often serendipitous routes through information. Organisation Being able to organise information is an important skill and part of the learning process. Learners need to be able to find and organise relevant information for their learning, so that it can be archived and easily retrieved. Arguably the way information is organised forms a kind of mental schema which in itself can act as a learning aid. Asynchronous tools, like discussion forums can be used by students to access and build up an archive of material relevant to their course. More generally there are now a range of tools that stu- dents can use to aggregate resources, such as social booking cites. Referencing tools are useful as a means of organising research papers, and can be used not only to compile references but also as a means of building up an annotated bibliography. Recommender sites can also be useful in terms of suggested related items of interest to a user, and RSS feeds means that information can be filtered and pushed to the end user against their own identified preferences. Inquiry Inquiry-based learning has long been recognised as one aspect of constructivism. The Personal In- quiry (PI) project (Sharples and Scanlon, 2011) for example developed an inquiry-based learning model (NQuire)1 which was used as the basis for an online toolkit to promote inquiry-based learn- ing in the development of scientific understanding in school children. Edelson et al. (1999) argue that inquiry-based learning is particularly important in a science context because science is essen- tially a question-driven, open-ended process and therefore students need to have personal experi- ences with scientific inquiry to understand this. They go on to suggest that inquiry activities provide a valuable context for learners to acquire, clarify and apply an understanding science concepts. Edelson et al., (1999) cite Blumenfeld et al. (1991) who identified sic contributions that technology can make to the learning process: i) enhancing interest and motivation, ii) providing access to infor- mation, iii) allowing active manipulable representations, iv) structuring the process with tactical and strategic support, v) diagnosing and correcting errors, and vi) managing complexity and aiding pro- duction. Technologies provide a mechanism for storing and manipulating large quantities of infor- mation. presenting information in a variety of ways, allowing users to interact with materials, and enabling learners to communicate with others to develop their understanding. Effective use of search engines can be used to foster inquiry-based learning, although it is important to note that it is important that the learners have the necessary critical literacy skills in order to eval- uate the relevance of the resources they find. Authenticity Learning-by-doing is generally considered the most effective way to learn. Authentic learning is im- portant in a rapidly changing world where the volume of information is ever expanding and where 1 http://www.nquire.org.uk/
- 9. learners are likely to have multiple careers. Therefore the development of expert thinking and com- plex communication are key skills for learners to develop. Lombardi (2007) argues that The Internet and a variety of emerging communication, visualization, and simulation technologies now make it possible to offer students authentic learning experiences ranging from experimentation to real-world prob- lem solving. This white paper explores what constitutes authentic learning, how technology supports it, what makes it effective, and why it is important. She goes on to state that learners express a preference for learning by doing, and that they are moti- vated by real-life problems. Technologies provide a variety of mechanism for offering students au- thentic learning experiences based on experimentation and action. Furthermore providing students with access to online research communities, enables them to develop a deeper sense of the disci- plinary culture. Authentic learning focuses on real-world problems and can be promoted through role-play, prob- lem-based learning, case studies and participation in virtual communities. Technologies can provide students with access to real research data and researchers. Visualisation tools and haptics can pro- vide students with authentic experiences, closely mimicking real world contexts. Technologies can also enable students to cohabit persistent simulations or metaverses, allowing them to role-play, look at multiple perspectives to the same set of issues and adapt to a dynamically changing situa- tion. Conole and Dyke (2004) argue that Information technologies provide a means by which people can be exposed to experiences very different to their own and extend their experience beyond their own communities. Experience of the ‘other’ through technology raises issues around authenticity and power in the “virtual reality” that can be accessed. For ex- ample, there may be disjuncture between the mediated ‘reported’ experience and the reality of lived experi- ence. It raises questions about how one distinguishes between what is real and what is rendered real via the technology. Negative affordances - constraints In addition to considering how different technologies can be used to support different forms of ped- agogy through the affordances outlined above, there are also a number of constraints (or negative affordances) which need to be considered. Firstly a particular technology may be time consuming in terms of the development of it to support a particular learning intervention. Secondly, it may be time consuming in terms of the amount of support that the teacher needs to give to the learners in using the technology. For example forums can require an significant amount of moderating. Thirdly the technology maybe difficult to use. For example for some wikis are difficult to get used to. Virtu- al worlds, like SecondLife, take time to adjust to and learners may need considerable support when they first use these tools. Fourthly, tools maybe be costly to produce, for example rich multimedia resources not only take time but resources to developed. However with the advent of the many free tools that are now available for producing content this is becoming less of an issue. Fifthly, there may be assessment issues with use of particular tools, for example what is the most appropriate way to assess group work using a wiki? Sixthly, tools may lack interactivity, for example static web pages, leading to potential student disengagement. Finally use of online social and participatory me- dia can result in learner confusion and be difficult to navigate, hence clearly signposted learning pathways might be needed. Conclusion This chapter has defined the notion of affordances and discussed it in relation to the affordances of different technologies. It has argued that the term is valuable in that it describes the way in which there is a complex and dynamic relationship between technologies and users.