Characteristics of a good sample design & types of sample design

CHARACTERISTICS OF A GOOD SAMPLE DESIGN
The characteristics of a good sample design are as follows:
(a) Sample design must result in a truly representative sample.
(b) Sample design must be such which results in a small sampling error.
(c) Sample design must be viable in the context of funds available for the
research study.
(d) Sample design must be such so that systematic bias can be controlled in a
better way.
(e) Sample should be such that the results of the sample study can be applied,
in general, for the universe with a reasonable level of confidence.

DIFFERENT TYPES OF SAMPLE DESIGNS
 There are different types of sample designs based on two factors viz., the
representation basis and the element selection technique.
 On the representation basis, the sample may be probability sampling or it
may be non-probability sampling.
 Probability sampling is based on the concept of random selection,
whereas non-probability sampling is ‘non-random’ sampling.
 On element selection basis, the sample may be either unrestricted or
restricted. When each sample element is drawn individually from the
population at large, then the sample so drawn is known as ‘unrestricted
sample’, whereas all other forms of sampling are covered under the term
‘restricted sampling’.

 Thus, sample designs are basically of two types viz., non-probability
sampling and probability sampling.
NON-PROBABILITY SAMPLING:
 Non-probability sampling is that sampling procedure which does not
afford any basis for estimating the probability that each item in the
population has of being included in the sample.
 Non-probability sampling is also known by different names such as
deliberate sampling, purposive sampling and judgement sampling.
 In this type of sampling, items for the sample are selected deliberately by
the researcher; his choice concerning the items remains supreme.
 In other words, under non-probability sampling the organisers of the
inquiry purposively choose the particular units of the universe for
constituting a sample on the basis that the small mass that they so select
out of a huge one will be typical or representative of the whole.

 For instance, if economic conditions of people living in a state are to be
studied, a few towns and villages may be purposively selected for
intensive study on the principle that they can be representative of the
entire state.
 Thus, the judgement of the organisers of the study plays an important part
in this sampling design.
 In such a design, personal element has a great chance of entering into the
selection of the sample.
 The investigator may select a sample which shall yield results favourable
to his point of view and if that happens, the entire inquiry may get
vitiated.
 Thus, there is always the danger of bias entering into this type of
sampling technique.

 But in the investigators are impartial, work without bias and have the
necessary experience so as to take sound judgement, the results obtained
from an analysis of deliberately selected sample may be tolerably reliable.
 However, in such a sampling, there is no assurance that every element has
some specifiable chance of being included.
 Sampling error in this type of sampling cannot be estimated and the
element of bias, great or small, is always there.
 As such this sampling design is rarely adopted in large inquires of
importance.
 However, in small inquiries and researches by individuals, this design
may be adopted because of the relative advantage of time and money
inherent in this method of sampling.

 Quota sampling is also an example of non-probability sampling. Under
quota sampling the interviewers are simply given quotas to be filled from
the different strata, with some restrictions on how they are to be filled.
 In other words, the actual selection of the items for the sample is left to
the interviewer’s discretion.
 This type of sampling is very convenient and is relatively inexpensive.
 But the samples so selected certainly do not possess the characteristic of
random samples.
 Quota samples are essentially judgement samples and inferences drawn
on their basis are not amenable to statistical treatment in a formal way.

PROBABILITY SAMPLING:
 Probability sampling is also known as ‘random sampling’ or ‘chance
sampling’.
 Under this sampling design, every item of the universe has an equal
chance of inclusion in the sample.
 It is, so to say, a lottery method in which individual units are picked up
from the whole group not deliberately but by some mechanical process.
 Here it is blind chance alone that determines whether one item or the
other is selected.
 The results obtained from probability or random sampling can be assured
in terms of probability i.e., we can measure the errors of estimation or the
significance of results obtained from a random sample, and this fact
brings out the superiority of random sampling design over the deliberate
sampling design.

 Random sampling ensures the law of Statistical Regularity which states
that if on an average the sample chosen is a random one, the sample will
have the same composition and characteristics as the universe.
 This is the reason why random sampling is considered as the best
technique of selecting a representative sample.
 Random sampling from a finite population refers to that method of
sample selection which gives each possible sample combination an equal
probability of being picked up and each item in the entire population to
have an equal chance of being included in the sample.
 This applies to sampling without replacement i.e., once an item is selected
for the sample, it cannot appear in the sample again (Sampling with
replacement is used less frequently in which procedure the element
selected for the sample is returned to the population before the next
element is selected.

In such a situation the same element could appear twice in the same sample
before the second element is chosen). In brief, the implications of random
sampling (or simple random sampling) are:
(a) It gives each element in the population an equal probability of getting into
the sample; and all choices are independent of one another.
(b) It gives each possible sample combination an equal probability of being
chosen.
Keeping this in view we can define a simple random sample (or simply a
random sample) from a finite population as a sample which is chosen in such
a way that each of the NCn possible samples has the same probability,
1/NCn, of being selected. To make it more clear we take a certain finite
population consisting of six elements (say a, b, c, d, e, f ) i.e., N = 6.

Suppose that we want to take a sample of size n = 3 from it. Then there are
6C3 = 20 possible distinct samples of the required size, and they consist of
the elements abc, abd, abe, abf, acd, ace, acf, ade, adf, aef, bcd, bce, bcf,
bde, bdf, bef, cde, cdf, cef, and def. If we choose one of these samples in such
a way that each has the probability 1/20 of being chosen, we will then call
this a random sample.
Reference : C.R.Kothari

Characteristics of a good sample design & types of sample design

Characteristics of a good sample design & types of sample design

More Related Content

What's hot(20)

Similar to Characteristics of a good sample design & types of sample design(20)

More from Dr.Sangeetha R(20)

Recently uploaded(20)

Characteristics of a good sample design & types of sample design