COMPUTER NETWORKING.pptx

COMPUTER NETWORKING.pptx

• 1.
  E-learning 1 Subject IT Topic COMPUTER NETWORKING & MULTIMEDIA Sub Topic TYPESOF NETWORK TRANSMISSION MEDIA
• 2.
  COMPUTER NETWORKING AND MULTIMEDIA 2 NETWORK Agroup of autonomous computers and associated devices connected together by communication channels like cables or telephone lines etc. is called a network. In a network, the computers work as stand alone machines but can communicate with other computers on the network as and when required.
• 3.
  3 Types of Networks Thereare mainly three types of networks as discussed below: 1. LAN (Local Area Network): A network spread over a diameter of minimum 1 m to maximum 10 km is called a local area network. It is usually installed within a building or a group of buildings. 2. MAN (Metropolitan Area Network): This type of network spans a small city. It is used by cable (TV) operators for program distribution. 3. WAN (Wide Area Network): This type of network spans an entire country and very often several countries. The speed of data transmission is a bit slower than that of LAN and the error rate is also high as the data has to travel over very long distances.
• 4.
  4 Need for Networking 1.Resource Sharing: Peripherals like laser printers, plotters and other softwares can be shared by computers which are in a network. 2. Cost Factor: As already discussed above, sharing of resources leads to reduction of cost also, as instead of buying software or peripherals separately for all the systems, it is better to put them in a network so that they can be shared and thus, prove to be very economical. 3. Reliability: Some important data and programs can be stored at more than one machine on a network so that if one machine goes down, the system does not crash completely. The data and program are however, still accessible from the other machines. 4.Communication: Networking has proved to be a great help in communication. It has virtually brought the world to a small room. A person anywhere in the world can access data from anywhere in fraction of a second. The facilities like e-mail, chat and video conferencing have helped many companies in keeping a check on the progress of their teams working in far-off branches of the company.
• 5.
  5 (i) Modem (Modulator-Demodulator):It is a device which converts digital signal coming from the computer to analog signal which is to be transmitted over a communication line. This process is called modulation. At the receiver’s end, the analog signal is again converted into digital signal. This process is called demodulation. (ii) Node: Every computer connected to the network is called a node. (iii) Work Station: Another name for node is work station. (iv) NIU (Network Interface Unit): In order to share information on a network and become a part of the network, each work station has a device called NIU which helps them to communicate with each other. (v) Communication Channels: The cables connecting the nodes to a network are called communication channels. They may be of three types: •Twisted-pair Cable •Co-axial Cable •Optical Fibres
• 6.
  CLASS 9- COMPUTERNETWORKING AND MULTIMEDIA 6 Wired Networking Technology When a wire is used to connect two computers it is termed as wired technology. Some of the types of wires used are discussed below: 1. Twisted-pair Cable A cable in which two independently insulated wires are twisted around each other is called twisted-pair cable. This type of cable is least expensive and used in old telephone networks. The wires are twisted to reduce the electromagnetic effect and also minimize the cross talk. Advantages •They are economical •Cause less noise interference Disadvantages •They can be used only for point to point connection i.e., in a LAN only from one computer directly to another computer. •The bandwidth is low.
• 7.
  7 Advantages: It is cheaperthan any other medium. •It is not fragile and is prone to various shocks and jerks. Disadvantages •Its insulation may degrade over a period of time and may require replacement of cable. •Interference of signal can occur. •It cannot be laid down in areas with physical constraints, e.g., mountainous areas and over water bodies. Co-axial Cable It is an electrical cable with an inner conductor which is surrounded by an insulating medium and which is again surrounded by an outer conductor. The outer conductor is covered with a plastic jacket. It is mainly used by cable TV operators to connect the community antenna and user homes.
• 8.
  CLASS 9- COMPUTERNETWORKING AND MULTIMEDIA 8 Optical Fibre It is the latest technology being used for data transmission where data travels in the form of light through a glass or plastic fibre. Optical fibres have higher data transfer rates and can carry signal over large distances without it getting weak. Advantages •They have higher bandwidth so can carry more data quickly. •Data can be carried over longer distances without loss. •They are immune to electromagnetic interference. •They are an apt media to carry images. Disadvantages •Their cost is high. •They are fragile. Fig- 8,5: Fibre Cable •Joining optical cables requires trained labour.
• 9.
  9 Bluetooth Bluetooth is atelecommunication protocol (set of rules) which describes how mobile phones, personal computers etc. can be interconnected without any wires. For this, a short-range wireless connection is used. A small radio receiver/transmitter is placed in each device which helps in transferring files between your bluetooth devices and the other bluetooth enabled devices within the range. Bluetooth is a low powered and short range (30 m) transmission technology.
• 10.
  10 Wifi (Wireless Fidelity) Thistechnology is more powerful and speed of data transmission is very high as compared to bluetooth. The main purpose of wifi is to connect us to Internet and other devices within the range and surf the web. This reduces cabling within a LAN. We can access Internet from anywhere in the area which is wifi activated and is called the wifizone. A wifi connection can be made upto 3000 feet away from a hot spot (wifi networking node). Most of the organisations are now going for wifizone within their office so that employees are able to access the Internet and also send or receive data from their colleagues.
• 11.
  11 Infrared This technology iscommonly used in remote control units in our homes and car locks. Computers use a similar technology to transfer or receive data. This is made possible by using short range wireless signals. To accomplish infrared technology usage, the computer should have an infrared network adapter which allows receiving and transfer of data. But the range of the communicating computers should not be more than 5 m. Moreover, infrared signals cannot pass through obstacles like walls unlike wifi and bluetooth. MS windows allows the computer to be connected to any other wireless device using Connect To option in the Start menu.
• 12.
  12 Multimedia is aform of communication that combines different content forms such as text, audio, images, animations, or video into a single presentation, in contrast to traditional mass media, such as printed material or audio recordings. A social networking service is an online platform which people use to build social networks or social relationships with other people who share similar personal or career interests, activities, backgrounds or real-life connections. Social networking services vary in format and the number of features.
• 13.
  13 Cloud computing isthe delivery of different services through the Internet. These resources include tools and applications like data storage, servers, databases, networking, and software. The two types of clouds are Public cloud and private cloud. Public cloud is cloud computing that's delivered via the internet and shared across organizations. Private cloud is cloud computing that is dedicated solely to your organization.