Data types in c++

Data Types in C++
By Rushikesh Gaikwad
Indian Institute of Information Technology
Pune
Email Id: grushikesh718@gmail.com
Linked In: https://www.linkedin.com/in/rushikesh-gaikwad-b6700215a/

Data Types in C++
A data type is a classification that specifies the type of value a variable can
hold.
Data types in C++ categories in mainly three types:
1. Built-in Data Type
2. Derived Data Type
3. User Defined Data Type

Built-In Data Type
It is predeﬁned data type and can be used directly by the user to declare variables.

Integer Data Type
Keyword: int
Storage: 4 Bytes in 64 & 32 bit OS and 2 Bytes in 16 bit OS
Range:
1. Signed data Type:
Keyword: signed
Int min = ( pow ( 2, number of bits assigned to data type) / 2 ) * -1
Int max = ( pow ( 2, number of bits assigned to data type) / 2 ) - 1
1. Unsigned data Type:
Keyword: unsigned
Int min = 0
Int max = pow ( 2, number of bits assigned to data type) - 1

Integer Data Type
Modiﬁers for data
Type:
1. Long
2. Short
3. Signed
4. Unsigned
Data Type Size(In Bytes) Range
Short int 2 -32768 to 32767
Unsigned short int 2 0 to 65535
Unsigned int 4 0 to 4,294,967,295
int 4 -2,147,483,648 to
2,147,483,647
Long int 4 -2,147,483,648 to
2,147,483,647
Unsigned long int 4 0 to 4,294,967,295

Integer Data Type
Program says:
1. Declaration of Int
2. Introduction of pointer variable
int main()
{
int c=4;
int *b;
b= &c;
cout << c << endl;
cout << &c << endl;
cout << *b << endl;
cout << b << endl;
cout << &b << endl;
return 0;
}

Integer Data Type
Program says:
1. Size of Int and its modiﬁers
#include <iostream>
using namespace std;
int main() {
int intType;
short int shortintType;
long int longintType;
// sizeof evaluates the size of a variable
cout << "Size of int: " << sizeof(intType) <<" bytes" << endl;
cout << "Size of short int: " << sizeof(shortintType)<<" bytes" << endl;
cout << "Size of long int: " << sizeof(longintType) <<" bytes" << endl;
return 0;
}

Integer Data Type
Program says:
1. Maximum and Minimum Limits of Int and its modiﬁer
#include <iostream>
#include <climits> // integer limits in header ﬁle
int main()
{
cout << "nn Check the upper and lower limits of integer :n";
cout << "--------------------------------------------------n";
cout << " The maximum limit of int data type : " << INT_MAX << endl;
cout << " The minimum limit of int data type : " << INT_MIN << endl;
cout << " The maximum limit of unsigned int data type : " << UINT_MAX << endl;
cout << " The maximum limit of long data type : " << LONG_MAX << endl;
cout << " The minimum limit of long data type : " << LONG_MIN << endl;
cout << " The maximum limit of unsigned long data type : " << ULONG_MAX << endl;
cout << " The minimum limit of short int data type : " << SHRT_MIN << endl;
cout << " The maximum limit of short int data type : " << SHRT_MAX << endl;
cout << " The maximum limit of unsigned short data type : " << USHRT_MAX << endl;
cout << endl;
return 0;
}

Integer Data Type
How the int is stored in Memory:
For data types int, signed int, 32 bits are allocated in memory.
Let us try to understand one by one.
1. int a = 456;
Value of variable a is 456. Now let us convert it to binary.
1 1 1 0 0 1 0 0 0
Now you get 9 bit number. Since int allocates 32 bits, ﬁll the remaining 23 bits with 0.
So the value stored in memory is
00000000 00000000 00000001 11001000

Integer Data Type
2. int a = - 456;
Variable value is -456.Now let us convert it to binary.
Binary value of 456-
0 1 1 1 0 0 1 0 0 0
Stored as 32 bit so this becomes- 00000000 00000000 00000001 11001000
1’s complement of binary value of 456: 11111111 11111111 11111110 00110111
2’s complement of binary value of 456: ( 11111111 11111111 11111110 00110111) + 1 =
( 11111111 11111111 11111110 00111000)
So the value stored in memory is
( 11111111 11111111 11111110 00111000)

Character Data type
Keyword: char
Storage: 1 Byte
Two types based on Modiﬁers:
1. Signed char: MSB is used as signed and
rest 7 bits as data bits
Sign bit = 1 i.e. negative number
Sign bit = 0 i.e. positive number
1. Unsigned char: No sign bit in Unsigned
char

Character Data type
Range of char:
Signed char: -128 to 127 i.e
-(2^8)/2 to (2^8)/2-1
Unsigned char: 0 to 255 i.e
0 to 2^8 - 1

Character Data type
#include <iostream>
int main()
{
char ch=130;
unsigned char uch=130;
signed char sch=130;
cout<< ch<<endl;
cout<< uch<<endl;
cout<< sch<<endl;
cout<<"Integer"<<endl;
cout<<int(ch)<<endl;
cout<<int(uch)<<endl;
cout<<int(sch)<<endl;
return 0;
}
Binary form of 130:
10000010
And it’s representation in signed
format is -126
Character is printed according to ascii
code 130
Integer for signed is printed as -126
Integer for unsigned is printed as 130
Ch and sch both are the signed type
of variable

Character Data type
How characters are Stored into memory:
For example, if we want to store char ‘A’ in computer, the corresponding ASCII
value will be stored in computer.
ASCII value for capital A is 65.
To store character value, computer will allocate 1 byte (8 bit) memory.
65 will converted into binary form which is (1000001) . Because computer
knows only binary number system.
Then 1000001 will be stored in 8-bit memory.
https://www.ascii-code.com/
Character data type is often called as integral data type because
memory implementation of char data type is in terms of number
code

Floating Data Type
1. Floating Point: Floating Point data type is used for storing single precision floating point
values or decimal values. Keyword used for floating point data type is float. Float
variables typically requires 4 byte of memory space.
2. Double Floating Point: Double Floating Point data type is used for storing double
precision floating point values or decimal values. Keyword used for double floating point
data type is double. Double variables typically requires 8 byte of memory space.

Void data Type
Void means without any value. void
datatype represents a valueless entity.
Void data type is used for those function
which does not returns a value.
#include <iostream>
void fun()
{
cout << "Hello";
return;
}
int main()
{
fun();
return 0;
}

Data Type Conversion
Two Types of Conversion:
1. Implicit Type:
Also known as automatic type conversion
Done by the compiler on its own, without any external trigger from the user.
1. Explicit Type:
This process is also called type casting and it is user-deﬁned. Here the user can
typecast the variable to make it of a particular data type.

Implicit Conversion
#include<iostream>
int main()
{
int x = 10; // integer x
char y = 'a'; // character c
// y implicitly converted to int.
// ASCII value of 'a' is 97
x = x+y;
// x is implicitly converted to ﬂoat
ﬂoat z = x + 1.1;
cout << "x = " << x << endl
<< "y = " << y << endl
<< "z = " << z << endl;
return 0;
}

Explicit Conversion
Converting by assignment: This is done by explicitly deﬁning the required data type in front of the
variable in parenthesis. This can be also considered as forceful casting.
Syntax: (datatype) variable

Explicit Conversion
// explicit type casting
#include <iostream>
int main()
{
double x = 1.2;
// Explicit conversion from double to int
int sum = (int)x + 1;
cout << "Sum = " << sum;
return 0;
}

ARRAY
An array is a series of elements of the same type placed in contiguous memory
locations .
NOTE: The elements ﬁeld within brackets [ ] which represents the number of elements
the array is going to hold, must be a constant value.
Since arrays are blocks of non-dynamic memory whose size must be determined before
execution.
Syntax: Datatype Array_name[size_of_array]

ARRAY
// C++ program to demonstrate Array
#include <iostream>
int main()
{
int arr[5];
arr[0] = 5;
arr[2] = -10;
// this is same as arr[1] = 2
arr[3 / 2] = 2;
arr[3] = arr[0];
cout<<arr[0]<<" "<<arr[1]<<" "<<arr[2]<<" "<<arr[3];
cout<<arr; // address of ﬁrst element
cout<<arr+1; // address of second element
return 0;
}

ARRAY
//Program to ﬁnd the sum of elements of array
#include <iostream>
int array [] = {16, 2, 77, 40, 12071};
int n;
result=0;
int main ()
{
for ( n=0 ; n<5 ; n++ )
{
result += array[n];
}
cout << result;
return 0;
}

Function
1. A function is a group of statements that performs the task.
1. A function is generally defined to save the user from writing the same lines of code again and
again for the same input.
1. All the lines of code are put together inside a single function and this can be called anywhere
required.
1. main() is a default function that is defined in every program of C++.
Syntax: returnType FunctionName(parameters) // Declaring the function
FunctionName(parameters) // Calling Function
returnType FunctionName(parameters) // defination of function
{ //Code}

Function
Example-1
#include <iostream>
// declaring a function
void greet() {
cout << "Hello there!";
}
int main() {
// calling the function
greet();
return 0;
}
Example-2
// Function with Parameters
#include <iostream>
// display a number
void displayNum(int n1, float n2) {
cout << "The int number is " << n1;
cout << "The double number is " << n2;
}
int main() {
int num1 = 5;
double num2 = 5.5;
// calling the function
displayNum(num1, num2);
return 0;
}

Pointers
A pointer is a variable whose value is the address of another variable.
Like any variable or constant, you must declare a pointer before you can
work with it. The general form of a pointer variable declaration is −
Syntax: type *var_name;

Pointers
#include <iostream>
int main () {
int var = 20; // actual variable declaration.
int *ip; // pointer variable
ip = &var; // store address of var in pointer variable
cout << "Value of var variable: ";
cout << var << endl;
// print the address stored in ip pointer variable
cout << "Address stored in ip variable: ";
cout << ip << endl;
// access the value at the address available in pointer
cout << "Value of *ip variable: ";
cout << *ip << endl;
return 0;
}

Pointers Size
#include <iostream>
int main()
{
int c=4;
int *b= &c;
char ch='b';
char* pc= &ch;
cout << sizeof(c) << endl;
cout << sizeof(ch) << endl;
cout << sizeof(b)<< endl;
cout << sizeof(pc) << endl;
return 0;
}

Reference
A reference variable is an alias,
that is, another name for an
already existing variable. Once a
reference is initialized with a
variable, either the variable name
or the reference name may be
used to refer to the variable.
Syntax: itype& ref-var = var-name;
// C++ program to illustrate Reference Derived
Type
#include <iostream>
int main()
{
int x = 10;
// ref is a reference to x.
int& ref = x;
// Value of x is now changed to 20
ref = 20;
cout << "x = " << x << endl;
// Value of x is now changed to 30
x = 30;
cout << "ref = " << ref << endl;
return 0;
}

Reference vs Pointer
References are often confused with pointers but three major
diﬀerences between references and pointers are −
● You cannot have NULL references. You must always be
able to assume that a reference is connected to a
legitimate piece of storage.
● Once a reference is initialized to an object, it cannot be
changed to refer to another object. Pointers can be
pointed to another object at any time.
● A reference must be initialized when it is created.
Pointers can be initialized at any time

Structure
1. A structure is a group of data elements grouped together under one name.
These data elements, known as members, can have different types and
different lengths.
1. Structures are declared in C++ using the following syntax:
struct structure_name
{
member_type1 member_name1;
.
.
} structure_variable;
1. Structure is different from an array in the sense that an array represents an
aggregate of elements of same type whereas a structure represents an
aggregate of elements of arbitrary types.

Structure
#include <iostream>
struct Point {
int x,
char y;
};
int main()
{
// Create an array of structures
struct Point arr[10];
// Access array members
arr[0].x = 10;
arr[0].y = ‘a’;
cout << arr[0].x << ", " << arr[0].y;
return 0;
}

Union
1. Union is a user-deﬁned datatype. All the members of union share
same memory location.
2. Size of union is decided by the size of largest member of union.
3. If you want to use same memory location for two or more
members, union is the best for that.
4. Unions are similar to structures. Union variables are created in
same manner as structure variables
5. If we change one variable, we can see the changes being reﬂected
in others.

Union
#include <iostream>
// Declaration of union is same as the structures
union test {
int x,
char y;
};
int main()
{ union test t;
// t.y also gets value 2
t.x = 97;
cout << "After making x = 97:"<< endl << "x = " << t.x << ", y = " << t.y << endl;
// t.x is also updated to 10
t.y = ‘b’;
cout << "After making Y = ‘ b’:" << endl<< "x = " << t.x << ", y = " << t.y << endl;
return 0;
}

Class
It is a user-defined data type, which holds its own data members
and member functions, which can be accessed and used by
creating an instance of that class. A class is like a blueprint for an
object.
Classes are generally declared using the keyword class, with the
following format:
class class_name
{
access_specifier_1: member1;
access_specifier_2: member2;
.
.
} object_name;

Class // C++ program to demonstrate Class
#include <bits/stdc++.h>
class Car{
// Access speciﬁer
public:
// Data Members
string carname;
// Member Functions()
void printname()
{
cout << "carname is: " <<carname;
}
};
int main()
{
// Declare an object of class geeks
Car obj1;
// accessing data member
obj1.carname = "TATA NEXON";
// accessing member function
obj1.printname();
return 0;
}

Enumerate
An enumeration is a user-deﬁned data type that consists of integral constants. To deﬁne
an enumeration, keyword enum is used.
enum season { spring, summer, autumn, winter };
Here, the name of the enumeration is season.
And, spring, summer and winter are values of type season.
By default, spring is 0, summer is 1 and so on. You can change the default value of an
enum element during declaration (if necessary).
enum season { spring = 0, summer = 4, autumn = 8, winter = 12};

Enumerate
Example 1: Enumeration Type
#include <iostream>
enum week { Sunday, Monday, Tuesday,
Wednesday, Thursday, Friday, Saturday };
int main()
{
week today;
today = Wednesday;
cout << "Day " << today+1;
return 0;
}
Example2: Changing Default Value of
Enums
#include <iostream>
enum seasons { spring = 34, summer = 4,
autumn = 9, winter = 32};
int main() {
seasons s;
s = summer;
cout << "Summer = " << s << endl;
return 0;
}

Data types in c++

More Related Content

What's hot (20)

Similar to Data types in c++ (20)

Recently uploaded (20)

Data types in c++