IRJET- Dairy Cattle Management- Web App

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 06 Issue: 04 | Apr 2019 www.irjet.net p-ISSN: 2395-0072
© 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 1727
Dairy Cattle Management- Web App
Dr.Chavan Madhukar S1, Choudhari Riya R2, Natu Shivani D3, Jagatap Aishwarya P4
1Associate Prof., Dept. of Electronics & Telecommunication Engineering, P.V.P. Institute of Technology,
Budhgaon-416304, Maharastra, India
2,3,4UG Student, Dept. of Electronics & Telecommunication Engineering, P.V.P. Institute of Technology,
Budhgaon-416304, Maharastra, India
---------------------------------------------------------------------***----------------------------------------------------------------------
Abstract - The large scale dairy farming industry has a
large amount of data to store. We have designed this website
to digitalize all the data and save paper and time. Thiswebsite
can also be used for small scale and medium scale dairy
farming. We have providedtwopanels(adminandmember)in
this website. Admin is the owner of dairy farm and member
may be the manager or worker at the cattle field. The admin
panel has facilities such as manage member, category, view
production, view pre delivery log, view post delivery log,
medical log. Admin is not allowed to make any changes in the
daily information filled by member. The batch wise and
member wise production of milk can be viewed by admin. All
the information about cattle is shown to admin but cannot be
edited. Admin has right to manage members. He can add or
remove member and the usernames are assigned to members
by admin. The number of cattle and types can be edited by
admin. In member panel, we have provided facilities such as
cattle food information, delivery information, heat date, milk
production, semen log, pre delivery log, post delivery log, rest
period, medical log etc. The member has right to fill all the
information about cattle on daily basis. The calculations for
heat date, semen date, delivery date, rest period are atomized.
Member receives alerts about all thedatesandfoodtimingson
the front page of the panel.
Key Words: Dairy, Web Application, Cattle, Pregnancy
Cycles, Heat Date
1. INTRODUCTION
DCM website controls a large amount of data in
cattle farming. There are different fields for admin and
member. Admin is the owner ofcattlefarmandmembermay
be the manager or worker or man providing milk to the
owner. Admin doesn't need to enter data on daily basis. The
basic information such as number of cattle, types of cattle is
taken from admin. Admin has right to add and delete
member from the website. He gives usernameandpassword
to the members and controls them. If the manager or
member enters or leaves the farming, admin can add or
delete the member. Admin can view day batch wise
production of milk and member wise production of milk. All
the information about pre delivery log, delivery log, and
medical log can be seen by admin but cannot be edited.
Member knows the details about cattle and works in the
farm so, the access for entering details about daily milk
production and other information is given to the member.
The food that is to be given to cattle is decided according to
the amount of milk it gives. Hence, the record of milk
production of each cattle is taken on daily basis. This
information is filled by member. The heat date, semen date,
checking pregnancy date, rest period, delivery date are
provided to member so that it is easier to handle a large
amount of cattle. Notifications for the samearecontinuously
given on the website.
Admin and member are connected through our
website. We have made our website user friendly and the
language used is also very easy to be understood so that it
can be handled by anyone.
2. SIGNIFICANCE
Our project is stepping towards the digitalization. From
anywhere you can manage the dairy farm. When you are in
home or any other place just by yourmobileandthiswebsite
user will get reminders in the form of notifications so that
his staff or he go at the working place and manage cattle.
These notifications can be related to feeding, medicines, or
heat time related etc.
3. OBJECTIVE
a. Save papers and make all information in digital
form which will help in environmental
responsibility.
b. User will get exact count of no of liters produced by
each animal.
c. All notifications related to animal so there feeding,
delivery, medical and all other life issues user can
control.
4. LITERATURE SURVEY
Akbar N [1] has modified the research in Feed intake
control in ruminants is mediated through physical and
metabolic constraints. Rumen fill, dietary fiber
concentration, and fiber digestibility are important physical
constraints. The overall performance of all reproductive
traits under this study indicated poor performance of the
herd comparative to its counterpart herd in the same
altitude range of the tropics and ideal ranges for dairy cows.
Wondossen A, Mohammed A and Enyew Negussie [2] have

researched in Reproductive Performance of Dairy Cows in a
Tropical HighlandEnvironment.Anygenetic improvementin
dairy cattle requires information on reproductive
performance in the given population. This study wascarried
out to evaluate the effect of non-genetic factors on
reproductive performance traits. J Marcelino Kongo[3] had
studied small enterprise producing traditional foods have a
high social, economic andeven ecological roleastheyusually
are based on sustainable technology, their products are
unique and thus competitive, and are the source of jobs and
income for many rural families acting as true guardians of
the land. Kimaro E.G, Lyimo-Macha J.G and Jeckoniah J.N
(2013)[4] researched on Gender roles in small holder dairy
farming pertinent issues on access and control over dairy
farming resources.
5. Facilities Provided By DCM
DCM provides different facilities to the member and
admin. It can be easily studied understood with the help of
flowcharts. So Let’s see how the facilities will be provided to
the user of website.
5.1 FOOD
As the site is mainly for buffalos and cows we have
considered two types of food for them. One is fodder which
will be constant for cows and buffalos while feed will be
varied according to the milk given by those cattle. This is
because wecalculateamountof feedtobegivenwiththehelp
of given milk by those cattle. This detail of food we have
collected from a local farmer. According to the health and
condition of cattle this may vary.
Buffalo:
According to our source, for buffalo fodder should be
given 15Kg and Feed will be 35% of the milk given by that
buffalo. While for cow fodder should 10Kg and feed will be
again 35% of given milk. The user can increase or decrease
the amount of food by observing the health and present
condition of the cattle. Like for the rest period (before
approximately three months from the delivery period called
as rest period. At this time taking out of milk from the cattle
should be stopped) the amount of food should be decreased.
Cow:
5.2. HEAT DATE
The heat period of cattle is for 2 to 3 days per month. The
cycle forheat dateis of 18 days. We take the seed heat dateof
cattle from the member and then calculate the current heat
date. The next heat date of cattle is calculated by adding 18
days in the seed heat date. To obtain current heat date, the
calculated date is compared with the current date. If the
calculated heat date is less than today's date then again the
same process is repeated. If the calculated date is equal to or
greater than today's datethen it is consideredascurrentheat
date.
Start
Enter Milk Amount of Cattle
Fodder = 15 kg
Feed= 35% of entered milk
End
Enter Milk Amount
Fodder = 10 kg
Feed= 35% of entered milk
Start
Send Notification
End
Send Notification

Reproductive Management Estrus detection unobserved
estrus may be due to managerial deficiencies and short
period of estrus. The dairy animals should be observed for
heat signs at least three times a day. Wall charts, breeding
wheels, herd monitors and individual cow records may be
used for identify the estrus. Teaser bulls (vasectomies or by
applyingapron)are usefulinidentifyingheatinlargenumber
of animals especially buffalo cows. Provision of adequate
lighting to improve estrus detection is necessary. This
requires rectal examination by qualified veterinary doctor.
No
Yes
5.3STOP MILK DATE
Cow:
Semen is inserted on the heat day. The day of
checking whether the cattle is pregnant is after 18 days from
the semen date. If the cattle is not pregnant then the same
process is repeated on next heat date.Ifthecattleispregnant,
delivery date is calculated.
To save energy of cattle and for getting a healthy
baby, the milk productionfromthecattleisstopped2months
before the delivery date. The date for stopping milk
production is decided in differentwaysforcowandbuffaloas
their pregnancy periods are different. For cow, milk
production is stopped after 200 days from semen date and
that for buffalo is stopped after 230 days from semen date.
No
Yes
Buffalo:
No
Yes
Start
Enter Seed Heat Date
Current Heat
Date= Seed Heat
Date+ (18*N) days
Send Alert to Member for
Heat Date
Start
Insert Semen
Check If
Pregnant?
Stop Milk Date = Semen
Date+ 200 Days
End
Start
Insert Semen
Check If
Pregnant?
End
Send Notification
Stop Milk Date = Semen
Date+ 230 Days
End
Send Notification

5.4 DELIVERY DATE
Semen is inserted on the heat day. The day of
checking whether the cattle is pregnant is after 18 days
from the semen date. If the cattleisnotpregnantthenthe
sameprocess is repeated on next heatdate.Ifthecattleis
pregnant, delivery date is calculated.
The pregnancy period of a cow is 9 months 9 days
(284 days)and that for buffalois10months10days(315
days). The delivery date of cattle is calculated by adding
the pregnancy period in semen date. For cow the
delivery date is calculated by adding 284 days in the
semen date and that for buffalo is obtained by adding
315 days in the semen date.
Cows:
No
Yes
Buffalo:
No
Yes
5.5CHECK PREGRANCY
Yes
No
Start
Insert Semen
Check If
Pregnant
?
Expected Delivery date=
Semen Date+ 284 Days
End
Send Notification
Insert Semen
Check If
Pregnant
?
Expected Delivery date=
Semen Date+ 315 Days
End
Send Notification
Start
Start
Current date=
Heat date
Insert semen
Check if
pregnant
after 18 days
Send alert to member
End

After breeding, animals shouldbecheckedforpregnancy
within 45-60 days by qualified veterinary doctor. Semen is
inserted on the heat day. The day of checking whether the
cattle is pregnant is after 18 days from the semen date. If the
cattle is not pregnant then the same process is repeated on
next heat date. If the cattle is pregnant, delivery date is
calculated.
5.6REST PERIOD:
After delivery, the cattle is on the rest period. Milk is
taken from the cattle but they are not made pregnant. The
rest period is of 91 days for both cow and buffalo. After 91
days again the cycle of heat date and semen date is started.
When we want to stop milk, feeding should be decreased.
After pregnancy period of milk giving is 7 to 8 months. The
amount to be feed per cattle is dependent on amount of milk
they give. Cattle feed is used to increase the milk yield. When
cattle is on dry period, to maintain her body weight feed
should be of one kg. To stop the milk of cattle feeding should
be decreased.
6. SOFTWARE TOOLS USED
FRONT END
Server Side Language : PHP
Lay Outing Language : HTML
Designing Language : CSS
Design Framework : Bootstrap
Backend : Mysql(Database)
Code Editor : Notepad
Output Software : Chrome, Firefox
Server Software : Wamp Server
7. ADVANTAGES
i. The details of cattle can be accessed with a single
click.
ii. The user doesn’t need to store information in any
other form.
iii. Notifications for feeding the cattle are given twice a
day.
iv. Notifications about monthly cycles and milk cycles
are sent time to time.
v. Easy to operate.
vi. User friendly
8. RESULTS
 Admin Panel
 Member Panel
Start
Enter Delivery Date
Stop Semen Up to Date=
Delivery Date+ 91 Days
End
Send Notification

9. CONCLUSION
By designing this website we have achieved ourgoal tostore
a large amount of data and save papers. This website is easy
to be handled and we have used very common words that
can be understood by anyone. The website helps to handle a
large amount of cattle as it calculates various dates and food
amount for each cattle.
Acknowledgment
First and foremost, I thank the almighty God for guiding
me throughout my studies till the accomplishment of this
project. I am grateful to my supervisor, Dr.M.S.Chavan for
the useful guidance and suggestions throughout the project;
it has been a great pleasure for me to get an opportunity to
work under him. A project of this nature could never have
been attempted without reference to and inspiration from
the works of others whose details are mentioned in
reference section. I also acknowledge all of them. Lastly, my
thanks goes to all of my lecturers, classmates and friends in
the department of Electronics and Telecommunication
Engineering at the University of shivaji who extended all
sorts of help to the accomplishment of this undertaking.
REFERENCES
[1] Akbar N, Department of Animal Sciences,” Physical and
Metabolic Constraints on Feed Intake in Ruminants: A
Systematic Model”, May 27, 2018,J Adv Dairy Res 2018,
Vol 6(2): 204
[2] Wondossen A, Mohammed A and Enyew Negussie,
”Reproductive Performance of Dairy Cows in a Tropical
Highland Environment”,18 May 2018,J Adv Dairy Res
2018, Vol 6(2): 203
[3] J MarcelinoKongo,"Small dairyindustry:Socio-economic
challenges, sustainability and innovation”, June 30,
2016, J Adv Dairy Res 2016, 4:2(Suppl)
[4] Kimaro E.G, Lyimo-Macha J.G and Jeckoniah J.N (2013):
Gender roles in small holder dairy farming pertinent
issues on access and control over dairy farming
resources in Arumeru district, Tanzania: Livestock
Research for Rural Development. Volume 25, Article
#82. Retrieved June 27, 2014
BIOGRAPHIES
“Dr.Chavan Madhukar S.
Associate Prof.,
Dept of Electronics and
Telecommunication Engineering,
P.V.P. Instutite of Technology,
Budhgaon.”
“Miss. Choudhari Riya R.
UG Student
Budhgaon.”
“Miss. Natu Shivani D.
UG Student
Budhgaon.”
“Miss. Jagatap Aishwarya p.
UG Student
Budhgaon.”

IRJET- Dairy Cattle Management- Web App

More Related Content

Similar to IRJET- Dairy Cattle Management- Web App (20)

More from IRJET Journal (20)

Recently uploaded (20)

IRJET- Dairy Cattle Management- Web App