[ITP - Lecture 17] Strings in C/C++

Strings Intro to Programming
MUHAMMAD HAMMAD WASEEM 1
What are Strings?
The way a group of integers can be stored in an integer array, similarly a group of characters can be
stored in a character array. Character arrays are many a time also called strings. Many languages
internally treat strings as character arrays, but somehow conceal this fact from the programmer.
Character arrays or strings are used by programming languages to manipulate text such as words and
sentences.
A string constant is a one-dimensional array of characters terminated by a null ( ‘0’ ). For example,
char name[ ] = { 'H', 'A', 'E', 'S', 'L', 'E', 'R', '0' } ;
Each character in the array occupies one byte of memory and the last character is always ‘0’. What
character is this? It looks like two characters, but it is actually only one character, with the indicating
that what follows it is something special. ‘0’ is called null character. Note that ‘0’ and ‘0’ are not
same. ASCII value of ‘0’ is 0, whereas ASCII value of ‘0’ is 48. Figure 9.1 shows the way a character
array is stored in memory. Note that the elements of the character array are stored in contiguous
memory locations.
The terminating null (‘0’) is important, because it is the only way the functions that work with a
string can know where the string ends. In fact, a string not terminated by a ‘0’ is not really a string, but
merely a collection of characters.
C concedes the fact that you would use strings very often and hence provides a shortcut for
initializing strings. For example, the string used above can also be initialized as,
char name[ ] = "HAESLER" ;
Note that, in this declaration ‘0’ is not necessary. C inserts the null character automatically.
/* Program to demonstrate printing of a string */
main( )
{
char name[ ] = "Klinsman" ;
int i = 0 ;
while ( i <= 7 )
{
printf ( "%c", name[i] ) ;
i++ ;
}
}
And here is the output...
Klinsman
We have initialized a character array, and then printed out the elements of this array within a while
loop. Can we write the while loop without using the final value 7? We can; because we know that each
character array always ends with a ‘0’. Following program illustrates this.
main( )
{

int i = 0 ;
while ( name[i] != `0' )
{
printf ( "%c", name[i] ) ;
i++ ;
}
}
Klinsman
Even though there are so many ways (as shown above) to refer to the elements of a character
array, rarely is any one of them used. This is because printf( ) function has got a sweet and simple
way of doing it, as shown below. Note that printf( ) doesn’t print the ‘0’.
main( )
{
printf ( "%s", name ) ;
}
The %s used in printf( ) is a format specification for printing out a string. The same specification can
be used to receive a string from the keyboard, as shown below.
main( )
{
char name[25] ;
printf ( "Enter your name " ) ;
scanf ( "%s", name ) ;
printf ( "Hello %s!", name ) ;
}
And here is a sample run of the program...
Enter your name Debashish
Hello Debashish!
Note that the declaration char name[25] sets aside 25 bytes under the array name[ ], whereas
the scanf( ) function fills in the characters typed at keyboard into this array until the enter key is hit.
Once enter is hit, scanf( ) places a ‘0’ in the array. Naturally, we should pass the base address of the
array to the scanf( ) function.
While entering the string using scanf( ) we must be cautious about two things:
a) The length of the string should not exceed the dimension of the character array. This is
because the C compiler doesn’t perform bounds checking on character arrays. Hence, if you
carelessly exceed the bounds there is always a danger of overwriting something important,
and in that event, you would have nobody to blame but yourselves.
b) scanf( ) is not capable of receiving multi-word strings. Therefore names such as ‘Debashish
Roy’ would be unacceptable. The way to get around this limitation is by using the function
gets( ). The usage of functions gets( ) and its counterpart puts( ) is shown below.
main( )
{
char name[25] ;

printf ( "Enter your full name " ) ;
gets ( name ) ;
puts ( "Hello!" ) ;
puts ( name ) ;
}
Enter your name Debashish Roy
Hello!
Debashish Roy
Pointers and Strings
Suppose we wish to store “Hello”. We may either store it in a string or we may ask the C compiler
to store it at some location in memory and assign the address of the string in a char pointer. This is
shown below:
char str[ ] = "Hello" ;
char *p = "Hello" ;
There is a subtle difference in usage of these two forms. For example, we cannot assign a string to
another, whereas, we can assign a char pointer to another char pointer. This is shown in the following
program.
main( )
{
char str1[ ] = "Hello" ;
char str2[10] ;
char *s = "Good Morning" ;
char *q ;
str2 = str1 ; /* error */
q = s ; /* works */
}
Also, once a string has been defined it cannot be initialized to another set of characters. Unlike
strings, such an operation is perfectly valid with char pointers.
main( )
{
char str1[ ] = "Hello" ;
char *p = "Hello" ;
str1 = "Bye" ; /* error */
p = "Bye" ; /* works */
}
Standard Library String Functions
With every C compiler a large set of useful string handling library functions are provided. Following
table show the most commonly used functions along with their purpose.
Function Use
strlen Finds length of a string
strlwr Converts a string to lowercase

strupr Converts a string to uppercase
strcat Appends one string at the end of another
strncat Appends first n characters of a string at the end of another
strcpy Copies a string into another
strncpy Copies first n characters of one string into another
strcmp Compares two strings
strncmp Compares first n characters of two strings
strcmpi Compares two strings without regard to case ("i" denotes that this function ignores case)
stricmp Compares two strings without regard to case (identical to strcmpi)
strnicmp Compares first n characters of two strings without regard to case
strdup Duplicates a string
strchr Finds first occurrence of a given character in a string
strrchr Finds last occurrence of a given character in a string
strstr Finds first occurrence of a given string in another string
strset Sets all characters of string to a given character
strnset Sets first n characters of a string to a given character
strrev Reverses string
Out of the above list we shall discuss the functions strlen( ), strcpy( ), strcat( ) and strcmp( ), since
these are the most commonly used functions. This will also illustrate how the library functions in
general handle strings.
strlen( )
This function counts the number of characters present in a string. Its usage is illustrated following.
main( )
{
char arr[ ] = "Bamboozled" ;
int len1, len2 ;
len1 = strlen ( arr ) ;
len2 = strlen ( "Humpty Dumpty" ) ;
printf ( "nstring = %s length = %d", arr, len1 ) ;
printf ( "nstring = %s length = %d", "Humpty Dumpty", len2 ) ;
}
The output would be...
string = Bamboozled length = 10
string = Humpty Dumpty length = 13
Note that in the first call to the function strlen( ), we are passing the base address of the
string, and the function in turn returns the length of the string. While calculating the length it doesn’t
count ‘0’. Even in the second call,
len2 = strlen ( "Humpty Dumpty" ) ;
what gets passed to strlen( ) is the address of the string and not the string itself.
strcpy( )
This function copies the contents of one string into another. The base addresses of the source and
target strings should be supplied to this function. Here is an example of strcpy( ) in action...

main( )
{
char source[ ] = "Sayonara" ;
char target[20] ;
strcpy ( target, source ) ;
printf ( "nsource string = %s", source ) ;
printf ( "ntarget string = %s", target ) ;
}
source string = Sayonara
target string = Sayonara
strcat( )
This function concatenates the source string at the end of the target string. For example, “Bombay”
and “Nagpur” on concatenation would result into a string “BombayNagpur”. Here is an example of
strcat( ) at work.
main( )
{
char source[ ] = "Folks!" ;
char target[30] = "Hello" ;
strcat ( target, source ) ;
printf ( "nsource string = %s", source ) ;
printf ( "ntarget string = %s", target ) ;
}
source string = Folks!
target string = HelloFolks!
strcmp( )
This is a function which compares two strings to find out whether they are same or different. The
two strings are compared character by character until there is a mismatch or end of one of the strings
is reached, whichever occurs first. If the two strings are identical, strcmp( ) returns a value zero. If
they’re not, it returns the numeric difference between the ASCII values of the first non-matching pairs
of characters. Here is a program which puts strcmp( ) in action.
main( )
{
char string1[ ] = "Jerry" ;
char string2[ ] = "Ferry" ;
int i, j, k ;
i = strcmp ( string1, "Jerry" ) ;
j = strcmp ( string1, string2 ) ;
k = strcmp ( string1, "Jerry boy" ) ;
printf ( "n%d %d %d", i, j, k ) ;
}
0 4 -32

[ITP - Lecture 17] Strings in C/C++

More Related Content

What's hot (20)

Similar to [ITP - Lecture 17] Strings in C/C++ (20)

More from Muhammad Hammad Waseem (20)

Recently uploaded (20)

[ITP - Lecture 17] Strings in C/C++