docs/testing/web_tests.md

# Web Tests (formerly known as "Layout Tests" or "LayoutTests")

Web tests are used by Blink to test many components, including but not
limited to layout and rendering. In general, web tests involve loading pages
in a test renderer (`content_shell`) and comparing the rendered output or
JavaScript output against an expected output file.

This document covers running and debugging existing web tests. See the
[Writing Web Tests documentation](./writing_web_tests.md) if you find
yourself writing web tests.

Note that we changed the term "layout tests" to "web tests".
Please assume these terms mean the identical stuff. We also call it as
"WebKit tests" and "WebKit layout tests".

["Web platform tests"](./web_platform_tests.md) (WPT) are the preferred form of
web tests and are located at
[web_tests/external/wpt](/third_party/blink/web_tests/external/wpt).
Tests that should work across browsers go there. Other directories are for
Chrome-specific tests only.

[TOC]

## Running Web Tests

### Initial Setup

Before you can run the web tests, you need to build the `blink_tests` target
to get `content_shell` and all of the other needed binaries.

```bash
autoninja -C out/Default blink_tests
```

On **Android** (web test support
[currently limited to KitKat and earlier](https://crbug.com/567947)) you need to
build and install `content_shell_apk` instead. See also:
[Android Build Instructions](../android_build_instructions.md).

```bash
autoninja -C out/Default content_shell_apk
adb install -r out/Default/apks/ContentShell.apk
```

On **Mac**, you probably want to strip the content_shell binary before starting
the tests. If you don't, you'll have 5-10 running concurrently, all stuck being
examined by the OS crash reporter. This may cause other failures like timeouts
where they normally don't occur.

```bash
strip ./xcodebuild/{Debug,Release}/content_shell.app/Contents/MacOS/content_shell
```

### Running the Tests

TODO: mention `testing/xvfb.py`

The test runner script is in `third_party/blink/tools/run_web_tests.py`.

To specify which build directory to use (e.g. out/Default, out/Release,
out/Debug) you should pass the `-t` or `--target` parameter. For example, to
use the build in `out/Default`, use:

```bash
third_party/blink/tools/run_web_tests.py -t Default
```

For Android (if your build directory is `out/android`):

```bash
third_party/blink/tools/run_web_tests.py -t android --android
```

*** promo
Windows users need to use `third_party/blink/tools/run_web_tests.bat` instead.
***

Tests marked as `[ Skip ]` in
[TestExpectations](../../third_party/blink/web_tests/TestExpectations)
won't be run by default, generally because they cause some intractable tool error.
To force one of them to be run, either rename that file or specify the skipped
test on the command line (see below) or in a file specified with --test-list
(however, --skip=always can make the tests marked as `[ Skip ]` always skipped).
Read the [Web Test Expectations documentation](./web_test_expectations.md) to
learn more about TestExpectations and related files.

*** promo
Currently only the tests listed in
[SmokeTests](../../third_party/blink/web_tests/SmokeTests)
are run on the Android bots, since running all web tests takes too long on
Android (and may still have some infrastructure issues). Most developers focus
their Blink testing on Linux. We rely on the fact that the Linux and Android
behavior is nearly identical for scenarios outside those covered by the smoke
tests.
***

To run only some of the tests, specify their directories or filenames as
arguments to `run_web_tests.py` relative to the web test directory
(`src/third_party/blink/web_tests`). For example, to run the fast form tests,
use:

```bash
third_party/blink/tools/run_web_tests.py fast/forms
```

Or you could use the following shorthand:

```bash
third_party/blink/tools/run_web_tests.py fast/fo\*
```

*** promo
Example: To run the web tests with a debug build of `content_shell`, but only
test the SVG tests and run pixel tests, you would run:

```bash
third_party/blink/tools/run_web_tests.py -t Default svg
```
***

As a final quick-but-less-robust alternative, you can also just use the
content_shell executable to run specific tests by using (example on Windows):

```bash
out/Default/content_shell.exe --run-web-tests <url>|<full_test_source_path>|<relative_test_path>
```

as in:

```bash
out/Default/content_shell.exe --run-web-tests \
    c:/chrome/src/third_party/blink/web_tests/fast/forms/001.html
```
or

```bash
out/Default/content_shell.exe --run-web-tests fast/forms/001.html
```

but this requires a manual diff against expected results, because the shell
doesn't do it for you. It also just dumps the text result only (as the dump of
pixels and audio binary data is not human readable).
See [Running Web Tests Using the Content Shell](./web_tests_in_content_shell.md)
for more details of running `content_shell`.

To see a complete list of arguments supported, run:

```bash
third_party/blink/tools/run_web_tests.py --help
```

*** note
**Linux Note:** We try to match the Windows render tree output exactly by
matching font metrics and widget metrics. If there's a difference in the render
tree output, we should see if we can avoid rebaselining by improving our font
metrics. For additional information on Linux web tests, please see
[docs/web_tests_linux.md](./web_tests_linux.md).
***

*** note
**Mac Note:** While the tests are running, a bunch of Appearance settings are
overridden for you so the right type of scroll bars, colors, etc. are used.
Your main display's "Color Profile" is also changed to make sure color
correction by ColorSync matches what is expected in the pixel tests. The change
is noticeable, how much depends on the normal level of correction for your
display. The tests do their best to restore your setting when done, but if
you're left in the wrong state, you can manually reset it by going to
System Preferences → Displays → Color and selecting the "right" value.
***

### Test Harness Options

This script has a lot of command line flags. You can pass `--help` to the script
to see a full list of options. A few of the most useful options are below:

| Option                      | Meaning |
|:----------------------------|:--------------------------------------------------|
| `--debug`                   | Run the debug build of the test shell (default is release). Equivalent to `-t Debug` |
| `--nocheck-sys-deps`        | Don't check system dependencies; this allows faster iteration. |
| `--verbose`                 |	Produce more verbose output, including a list of tests that pass. |
| `--reset-results`           |	Overwrite the current baselines (`-expected.{png|txt|wav}` files) with actual results, or create new baselines if there are no existing baselines. |
| `--renderer-startup-dialog` | Bring up a modal dialog before running the test, useful for attaching a debugger. |
| `--fully-parallel`          | Run tests in parallel using as many child processes as the system has cores. |
| `--driver-logging`          | Print C++ logs (LOG(WARNING), etc).  |

## Success and Failure

A test succeeds when its output matches the pre-defined expected results. If any
tests fail, the test script will place the actual generated results, along with
a diff of the actual and expected results, into
`src/out/Default/layout_test_results/`, and by default launch a browser with a
summary and link to the results/diffs.

The expected results for tests are in the
`src/third_party/blink/web_tests/platform` or alongside their respective
tests.

*** note
Tests which use [testharness.js](https://github.com/w3c/testharness.js/)
do not have expected result files if all test cases pass.
***

A test that runs but produces the wrong output is marked as "failed", one that
causes the test shell to crash is marked as "crashed", and one that takes longer
than a certain amount of time to complete is aborted and marked as "timed out".
A row of dots in the script's output indicates one or more tests that passed.

## Test expectations

The
[TestExpectations](../../third_party/blink/web_tests/TestExpectations) file (and related
files) contains the list of all known web test failures. See the
[Web Test Expectations documentation](./web_test_expectations.md) for more
on this.

## Testing Runtime Flags

There are two ways to run web tests with additional command-line arguments:

* Using `--additional-driver-flag`:

  ```bash
  third_party/blink/tools/run_web_tests.py --additional-driver-flag=--blocking-repaint
  ```

  This tells the test harness to pass `--blocking-repaint` to the
  content_shell binary.

  It will also look for flag-specific expectations in
  `web_tests/FlagExpectations/blocking-repaint`, if this file exists. The
  suppressions in this file override the main TestExpectations files.
  However, `[ Slow ]` in either flag-specific expectations or base expectations
  is always merged into the used expectations.

  It will also look for baselines in `web_tests/flag-specific/blocking-repaint`.
  The baselines in this directory override the fallback baselines.

  By default, name of the expectation file name under
  `web_tests/FlagExpectations` and name of the baseline directory under
  `web_tests/flag-specific` uses the first flag of --additional-driver-flag
  with leading '-'s stripped.

  You can also customize the name in `web_tests/FlagSpecificConfig` when
  the name is too long or when we need to match multiple additional args:

  ```json
  {
    "name": "short-name",
    "args": ["--blocking-repaint", "--another-flag"]
  }
  ```

  When at least `--additional-driver-flag=--blocking-repaint` and
  `--additional-driver-flag=--another-flag` are specified, `short-name` will
  be used as name of the flag specific expectation file and the baseline directory.

  With the config, you can also use `--flag-specific=short-name` as a shortcut
  of `--additional-driver-flag=--blocking-repaint --additional-driver-flag=--another-flag`.

* Using a *virtual test suite* defined in
  [web_tests/VirtualTestSuites](../../third_party/blink/web_tests/VirtualTestSuites).
  A virtual test suite runs a subset of web tests with additional flags, with
  `virtual/<prefix>/...` in their paths. The tests can be virtual tests that
  map to real base tests (directories or files) whose paths match any of the
  specified bases, or any real tests under `web_tests/virtual/<prefix>/`
  directory. For example, you could test a (hypothetical) new mode for
  repainting using the following virtual test suite:

  ```json
  {
    "prefix": "blocking_repaint",
    "bases": ["compositing", "fast/repaint"],
    "args": ["--blocking-repaint"]
  }
  ```

  This will create new "virtual" tests of the form
  `virtual/blocking_repaint/compositing/...` and
  `virtual/blocking_repaint/fast/repaint/...` which correspond to the files
  under `web_tests/compositing` and `web_tests/fast/repaint`, respectively,
  and pass `--blocking-repaint` to `content_shell` when they are run.

  These virtual tests exist in addition to the original `compositing/...` and
  `fast/repaint/...` tests. They can have their own expectations in
  `web_tests/TestExpectations`, and their own baselines. The test harness will
  use the non-virtual expectations and baselines as a fallback. If a virtual
  test has its own expectations, they will override all non-virtual
  expectations. otherwise the non-virtual expectations will be used. However,
  `[ Slow ]` in either virtual or non-virtual expectations is always merged
  into the used expectations. If a virtual test is expected to pass while the
  non-virtual test is expected to fail, you need to add an explicit `[ Pass ]`
  entry for the virtual test.

  This will also let any real tests under `web_tests/virtual/blocking_repaint`
  directory run with the `--blocking-repaint` flag.

  The "prefix" value should be unique. Multiple directories with the same flags
  should be listed in the same "bases" list. The "bases" list can be empty,
  in case that we just want to run the real tests under `virtual/<prefix>`
  with the flags without creating any virtual tests.

For flags whose implementation is still in progress, virtual test suites and
flag-specific expectations represent two alternative strategies for testing.
Consider the following when choosing between them:

* The
  [waterfall builders](https://dev.chromium.org/developers/testing/chromium-build-infrastructure/tour-of-the-chromium-buildbot)
  and [try bots](https://dev.chromium.org/developers/testing/try-server-usage)
  will run all virtual test suites in addition to the non-virtual tests.
  Conversely, a flag-specific expectations file won't automatically cause the
  bots to test your flag - if you want bot coverage without virtual test suites,
  you will need to set up a dedicated bot for your flag.

* Due to the above, virtual test suites incur a performance penalty for the
  commit queue and the continuous build infrastructure. This is exacerbated by
  the need to restart `content_shell` whenever flags change, which limits
  parallelism. Therefore, you should avoid adding large numbers of virtual test
  suites. They are well suited to running a subset of tests that are directly
  related to the feature, but they don't scale to flags that make deep
  architectural changes that potentially impact all of the tests.

* Note that using wildcards in virtual test path names (e.g.
  `virtual/blocking_repaint/fast/repaint/*`) is not supported, but you can
  still use `virtual/blocking_repaint` to run all real and virtual tests
  in the suite or `virtual/blocking_repaint/fast/repaint/dir` to run real
  or virtual tests in the suite under a specific directory.

*** note
We can run a virtual test with additional flags. Both the virtual args and the
additional flags will be applied. The fallback order of baselines and
expectations will be: 1) flag-specific virtual, 2) non-flag-specific virtual,
3) flag-specific base, 4) non-flag-specific base
***

## Tracking Test Failures

All bugs, associated with web test failures must have the
[Test-Layout](https://crbug.com/?q=label:Test-Layout) label. Depending on how
much you know about the bug, assign the status accordingly:

* **Unconfirmed** -- You aren't sure if this is a simple rebaseline, possible
  duplicate of an existing bug, or a real failure
* **Untriaged** -- Confirmed but unsure of priority or root cause.
* **Available** -- You know the root cause of the issue.
* **Assigned** or **Started** -- You will fix this issue.

When creating a new web test bug, please set the following properties:

* Components: a sub-component of Blink
* OS: **All** (or whichever OS the failure is on)
* Priority: 2 (1 if it's a crash)
* Type: **Bug**
* Labels: **Test-Layout**

You can also use the _Layout Test Failure_ template, which pre-sets these
labels for you.

## Debugging Web Tests

After the web tests run, you should get a summary of tests that pass or
fail. If something fails unexpectedly (a new regression), you will get a
`content_shell` window with a summary of the unexpected failures. Or you might
have a failing test in mind to investigate. In any case, here are some steps and
tips for finding the problem.

* Take a look at the result. Sometimes tests just need to be rebaselined (see
  below) to account for changes introduced in your patch.
    * Load the test into a trunk Chrome or content_shell build and look at its
      result. (For tests in the http/ directory, start the http server first.
      See above. Navigate to `http://localhost:8000/` and proceed from there.)
      The best tests describe what they're looking for, but not all do, and
      sometimes things they're not explicitly testing are still broken. Compare
      it to Safari, Firefox, and IE if necessary to see if it's correct. If
      you're still not sure, find the person who knows the most about it and
      ask.
    * Some tests only work properly in content_shell, not Chrome, because they
      rely on extra APIs exposed there.
    * Some tests only work properly when they're run in the web-test
      framework, not when they're loaded into content_shell directly. The test
      should mention that in its visible text, but not all do. So try that too.
      See "Running the tests", above.
* If you think the test is correct, confirm your suspicion by looking at the
  diffs between the expected result and the actual one.
    * Make sure that the diffs reported aren't important. Small differences in
      spacing or box sizes are often unimportant, especially around fonts and
      form controls. Differences in wording of JS error messages are also
      usually acceptable.
    * `third_party/blink/tools/run_web_tests.py path/to/your/test.html` produces
      a page listing all test results. Those which fail their expectations will
      include links to the expected result, actual result, and diff. These
      results are saved to `$root_build_dir/layout-test-results`.
        * Alternatively the `--results-directory=path/for/output/` option allows
          you to specify an alternative directory for the output to be saved to.
    * If you're still sure it's correct, rebaseline the test (see below).
      Otherwise...
* If you're lucky, your test is one that runs properly when you navigate to it
  in content_shell normally. In that case, build the Debug content_shell
  project, fire it up in your favorite debugger, and load the test file either
  from a `file:` URL.
    * You'll probably be starting and stopping the content_shell a lot. In VS,
      to save navigating to the test every time, you can set the URL to your
      test (`file:` or `http:`) as the command argument in the Debugging section of
      the content_shell project Properties.
    * If your test contains a JS call, DOM manipulation, or other distinctive
      piece of code that you think is failing, search for that in the Chrome
      solution. That's a good place to put a starting breakpoint to start
      tracking down the issue.
    * Otherwise, you're running in a standard message loop just like in Chrome.
      If you have no other information, set a breakpoint on page load.
* If your test only works in full web-test mode, or if you find it simpler to
  debug without all the overhead of an interactive session, start the
  content_shell with the command-line flag `--run-web-tests`, followed by the
  URL (`file:` or `http:`) to your test. More information about running web tests
  in content_shell can be found [here](./web_tests_in_content_shell.md).
    * In VS, you can do this in the Debugging section of the content_shell
      project Properties.
    * Now you're running with exactly the same API, theme, and other setup that
      the web tests use.
    * Again, if your test contains a JS call, DOM manipulation, or other
      distinctive piece of code that you think is failing, search for that in
      the Chrome solution. That's a good place to put a starting breakpoint to
      start tracking down the issue.
    * If you can't find any better place to set a breakpoint, start at the
      `TestShell::RunFileTest()` call in `content_shell_main.cc`, or at
      `shell->LoadURL() within RunFileTest()` in `content_shell_win.cc`.
* Debug as usual. Once you've gotten this far, the failing web test is just a
  (hopefully) reduced test case that exposes a problem.

### Debugging HTTP Tests

To run the server manually to reproduce/debug a failure:

```bash
third_party/blink/tools/run_blink_httpd.py
```

The web tests are served from `http://127.0.0.1:8000/`. For example, to
run the test
`web_tests/http/tests/serviceworker/chromium/service-worker-allowed.html`,
navigate to
`http://127.0.0.1:8000/serviceworker/chromium/service-worker-allowed.html`. Some
tests behave differently if you go to `127.0.0.1` vs. `localhost`, so use
`127.0.0.1`.

To kill the server, hit any key on the terminal where `run_blink_httpd.py` is
running, use `taskkill` or the Task Manager on Windows, or `killall` or
Activity Monitor on macOS.

The test server sets up an alias to the `web_tests/resources` directory. For
example, in HTTP tests, you can access the testing framework using
`src="/js-test-resources/js-test.js"`.

### Tips

Check https://test-results.appspot.com/ to see how a test did in the most recent
~100 builds on each builder (as long as the page is being updated regularly).

A timeout will often also be a text mismatch, since the wrapper script kills the
content_shell before it has a chance to finish. The exception is if the test
finishes loading properly, but somehow hangs before it outputs the bit of text
that tells the wrapper it's done.

Why might a test fail (or crash, or timeout) on buildbot, but pass on your local
machine?
* If the test finishes locally but is slow, more than 10 seconds or so, that
  would be why it's called a timeout on the bot.
* Otherwise, try running it as part of a set of tests; it's possible that a test
  one or two (or ten) before this one is corrupting something that makes this
  one fail.
* If it consistently works locally, make sure your environment looks like the
  one on the bot (look at the top of the stdio for the webkit_tests step to see
  all the environment variables and so on).
* If none of that helps, and you have access to the bot itself, you may have to
  log in there and see if you can reproduce the problem manually.

### Debugging DevTools Tests

* Do one of the following:
    * Option A) Run from the `chromium/src` folder:
      `third_party/blink/tools/run_web_tests.py --additional-driver-flag='--remote-debugging-port=9222' --additional-driver-flag='--debug-devtools' --time-out-ms=6000000`
    * Option B) If you need to debug an http/tests/inspector test, start httpd
      as described above. Then, run content_shell:
      `out/Default/content_shell --remote-debugging-port=9222 --additional-driver-flag='--debug-devtools' --run-web-tests http://127.0.0.1:8000/path/to/test.html`
* Open `http://localhost:9222` in a stable/beta/canary Chrome, click the single
  link to open the devtools with the test loaded.
* In the loaded devtools, set any required breakpoints and execute `test()` in
  the console to actually start the test.

NOTE: If the test is an html file, this means it's a legacy test so you need to add:
* Add `window.debugTest = true;` to your test code as follows:

  ```javascript
  window.debugTest = true;
  function test() {
    /* TEST CODE */
  }
  ```

## Bisecting Regressions

You can use [`git bisect`](https://git-scm.com/docs/git-bisect) to find which
commit broke (or fixed!) a web test in a fully automated way.  Unlike
[bisect-builds.py](http://dev.chromium.org/developers/bisect-builds-py), which
downloads pre-built Chromium binaries, `git bisect` operates on your local
checkout, so it can run tests with `content_shell`.

Bisecting can take several hours, but since it is fully automated you can leave
it running overnight and view the results the next day.

To set up an automated bisect of a web test regression, create a script like
this:

```bash
#!/bin/bash

# Exit code 125 tells git bisect to skip the revision.
gclient sync || exit 125
autoninja -C out/Debug -j100 blink_tests || exit 125

third_party/blink/tools/run_web_tests.py -t Debug \
  --no-show-results --no-retry-failures \
  path/to/web/test.html
```

Modify the `out` directory, ninja args, and test name as appropriate, and save
the script in `~/checkrev.sh`.  Then run:

```bash
chmod u+x ~/checkrev.sh  # mark script as executable
git bisect start <badrev> <goodrev>
git bisect run ~/checkrev.sh
git bisect reset  # quit the bisect session
```

## Rebaselining Web Tests

*** promo
To automatically re-baseline tests across all Chromium platforms, using the
buildbot results, see [How to rebaseline](./web_test_expectations.md#How-to-rebaseline).
Alternatively, to manually run and test and rebaseline it on your workstation,
read on.
***

```bash
third_party/blink/tools/run_web_tests.py --reset-results foo/bar/test.html
```

If there are current expectation files for `web_tests/foo/bar/test.html`,
the above command will overwrite the current baselines at their original
locations with the actual results. The current baseline means the `-expected.*`
file used to compare the actual result when the test is run locally, i.e. the
first file found in the [baseline search path](https://cs.chromium.org/search/?q=port/base.py+baseline_search_path).

If there are no current baselines, the above command will create new baselines
in the platform-independent directory, e.g.
`web_tests/foo/bar/test-expected.{txt,png}`.

When you rebaseline a test, make sure your commit description explains why the
test is being re-baselined.

### Rebaselining flag-specific expectations

Though we prefer the Rebaseline Tool to local rebaselining, the Rebaseline Tool
doesn't support rebaselining flag-specific expectations.

```bash
third_party/blink/tools/run_web_tests.py --additional-driver-flag=--enable-flag --reset-results foo/bar/test.html
```
*** promo
You can use `--flag-specific=config` as a shorthand of
`--additional-driver-flag=--enable-flag` if `config` is defined in
`web_tests/FlagSpecificConfig`.
***

New baselines will be created in the flag-specific baselines directory, e.g.
`web_tests/flag-specific/enable-flag/foo/bar/test-expected.{txt,png}`
or
`web_tests/flag-specific/config/foo/bar/test-expected.{txt,png}`

Then you can commit the new baselines and upload the patch for review.

However, it's difficult for reviewers to review the patch containing only new
files. You can follow the steps below for easier review.

1. Copy existing baselines to the flag-specific baselines directory for the
   tests to be rebaselined:
   ```bash
   third_party/blink/tools/run_web_tests.py --additional-driver-flag=--enable-flag --copy-baselines foo/bar/test.html
   ```
   Then add the newly created baseline files, commit and upload the patch.
   Note that the above command won't copy baselines for passing tests.

2. Rebaseline the test locally:
   ```bash
   third_party/blink/tools/run_web_tests.py --additional-driver-flag=--enable-flag --reset-results foo/bar/test.html
   ```
   Commit the changes and upload the patch.

3. Request review of the CL and tell the reviewer to compare the patch sets that
   were uploaded in step 1 and step 2 to see the differences of the rebaselines.

## Known Issues

See
[bugs with the component Blink>Infra](https://bugs.chromium.org/p/chromium/issues/list?can=2&q=component%3ABlink%3EInfra)
for issues related to Blink tools, include the web test runner.

* If QuickTime is not installed, the plugin tests
  `fast/dom/object-embed-plugin-scripting.html` and
  `plugins/embed-attributes-setting.html` are expected to fail.