diff options
Diffstat (limited to 'src/quick/util/qdeclarativetransitionmanager.cpp')
| -rw-r--r-- | src/quick/util/qdeclarativetransitionmanager.cpp | 282 |
1 files changed, 282 insertions, 0 deletions
diff --git a/src/quick/util/qdeclarativetransitionmanager.cpp b/src/quick/util/qdeclarativetransitionmanager.cpp new file mode 100644 index 0000000000..2dd1da70ed --- /dev/null +++ b/src/quick/util/qdeclarativetransitionmanager.cpp @@ -0,0 +1,282 @@ +/**************************************************************************** +** +** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation ([email protected]) +** +** This file is part of the QtDeclarative module of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** GNU Lesser General Public License Usage +** This file may be used under the terms of the GNU Lesser General Public +** License version 2.1 as published by the Free Software Foundation and +** appearing in the file LICENSE.LGPL included in the packaging of this +** file. Please review the following information to ensure the GNU Lesser +** General Public License version 2.1 requirements will be met: +** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain additional +** rights. These rights are described in the Nokia Qt LGPL Exception +** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. +** +** GNU General Public License Usage +** Alternatively, this file may be used under the terms of the GNU General +** Public License version 3.0 as published by the Free Software Foundation +** and appearing in the file LICENSE.GPL included in the packaging of this +** file. Please review the following information to ensure the GNU General +** Public License version 3.0 requirements will be met: +** http://www.gnu.org/copyleft/gpl.html. +** +** Other Usage +** Alternatively, this file may be used in accordance with the terms and +** conditions contained in a signed written agreement between you and Nokia. +** +** +** +** +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + +#include "qdeclarativetransitionmanager_p_p.h" + +#include "qdeclarativetransition_p.h" +#include "qdeclarativestate_p_p.h" +#include "qdeclarativestate_p.h" + +#include <private/qdeclarativebinding_p.h> +#include <private/qdeclarativeglobal_p.h> +#include <private/qdeclarativeproperty_p.h> + +#include <QtCore/qdebug.h> + +QT_BEGIN_NAMESPACE + +DEFINE_BOOL_CONFIG_OPTION(stateChangeDebug, STATECHANGE_DEBUG); + +class QDeclarativeTransitionManagerPrivate +{ +public: + QDeclarativeTransitionManagerPrivate() + : state(0) {} + + void applyBindings(); + typedef QList<QDeclarativeSimpleAction> SimpleActionList; + QDeclarativeState *state; + QDeclarativeGuard<QDeclarativeTransition> transition; + QDeclarativeStateOperation::ActionList bindingsList; + SimpleActionList completeList; +}; + +QDeclarativeTransitionManager::QDeclarativeTransitionManager() +: d(new QDeclarativeTransitionManagerPrivate) +{ +} + +void QDeclarativeTransitionManager::setState(QDeclarativeState *s) +{ + d->state = s; +} + +QDeclarativeTransitionManager::~QDeclarativeTransitionManager() +{ + delete d; d = 0; +} + +void QDeclarativeTransitionManager::complete() +{ + d->applyBindings(); + + for (int ii = 0; ii < d->completeList.count(); ++ii) { + const QDeclarativeProperty &prop = d->completeList.at(ii).property(); + prop.write(d->completeList.at(ii).value()); + } + + d->completeList.clear(); + + if (d->state) + static_cast<QDeclarativeStatePrivate*>(QObjectPrivate::get(d->state))->complete(); +} + +void QDeclarativeTransitionManagerPrivate::applyBindings() +{ + foreach(const QDeclarativeAction &action, bindingsList) { + if (!action.toBinding.isNull()) { + QDeclarativePropertyPrivate::setBinding(action.property, action.toBinding.data()); + } else if (action.event) { + if (action.reverseEvent) + action.event->reverse(); + else + action.event->execute(); + } + + } + + bindingsList.clear(); +} + +void QDeclarativeTransitionManager::transition(const QList<QDeclarativeAction> &list, + QDeclarativeTransition *transition) +{ + cancel(); + + QDeclarativeStateOperation::ActionList applyList = list; + // Determine which actions are binding changes and disable any current bindings + foreach(const QDeclarativeAction &action, applyList) { + if (action.toBinding) + d->bindingsList << action; + if (action.fromBinding) + QDeclarativePropertyPrivate::setBinding(action.property, 0); // Disable current binding + if (action.event && action.event->changesBindings()) { //### assume isReversable()? + d->bindingsList << action; + action.event->clearBindings(); + } + } + + // Animated transitions need both the start and the end value for + // each property change. In the presence of bindings, the end values + // are non-trivial to calculate. As a "best effort" attempt, we first + // apply all the property and binding changes, then read all the actual + // final values, then roll back the changes and proceed as normal. + // + // This doesn't catch everything, and it might be a little fragile in + // some cases - but whatcha going to do? + // + // Note that we only fast forward if both a transition and bindings are + // present, as it is unneccessary (and potentially expensive) otherwise. + + if (transition && !d->bindingsList.isEmpty()) { + + // Apply all the property and binding changes + for (int ii = 0; ii < applyList.size(); ++ii) { + const QDeclarativeAction &action = applyList.at(ii); + if (!action.toBinding.isNull()) { + QDeclarativePropertyPrivate::setBinding(action.property, action.toBinding.data(), QDeclarativePropertyPrivate::BypassInterceptor | QDeclarativePropertyPrivate::DontRemoveBinding); + } else if (!action.event) { + QDeclarativePropertyPrivate::write(action.property, action.toValue, QDeclarativePropertyPrivate::BypassInterceptor | QDeclarativePropertyPrivate::DontRemoveBinding); + } else if (action.event->isReversable()) { + if (action.reverseEvent) + action.event->reverse(QDeclarativeActionEvent::FastForward); + else + action.event->execute(QDeclarativeActionEvent::FastForward); + } + } + + // Read all the end values for binding changes + for (int ii = 0; ii < applyList.size(); ++ii) { + QDeclarativeAction *action = &applyList[ii]; + if (action->event) { + action->event->saveTargetValues(); + continue; + } + const QDeclarativeProperty &prop = action->property; + if (!action->toBinding.isNull() || !action->toValue.isValid()) { + action->toValue = prop.read(); + } + } + + // Revert back to the original values + foreach(const QDeclarativeAction &action, applyList) { + if (action.event) { + if (action.event->isReversable()) { + action.event->clearBindings(); + action.event->rewind(); + action.event->clearBindings(); //### shouldn't be needed + } + continue; + } + + if (action.toBinding) + QDeclarativePropertyPrivate::setBinding(action.property, 0); // Make sure this is disabled during the transition + + QDeclarativePropertyPrivate::write(action.property, action.fromValue, QDeclarativePropertyPrivate::BypassInterceptor | QDeclarativePropertyPrivate::DontRemoveBinding); + } + } + + if (transition) { + QList<QDeclarativeProperty> touched; + d->transition = transition; + d->transition->prepare(applyList, touched, this); + + // Modify the action list to remove actions handled in the transition + for (int ii = 0; ii < applyList.count(); ++ii) { + const QDeclarativeAction &action = applyList.at(ii); + + if (action.event) { + + if (action.actionDone) { + applyList.removeAt(ii); + --ii; + } + + } else { + + if (touched.contains(action.property)) { + if (action.toValue != action.fromValue) + d->completeList << + QDeclarativeSimpleAction(action, QDeclarativeSimpleAction::EndState); + + applyList.removeAt(ii); + --ii; + } + + } + } + } + + // Any actions remaining have not been handled by the transition and should + // be applied immediately. We skip applying bindings, as they are all + // applied at the end in applyBindings() to avoid any nastiness mid + // transition + foreach(const QDeclarativeAction &action, applyList) { + if (action.event && !action.event->changesBindings()) { + if (action.event->isReversable() && action.reverseEvent) + action.event->reverse(); + else + action.event->execute(); + } else if (!action.event && !action.toBinding) { + action.property.write(action.toValue); + } + } +#ifndef QT_NO_DEBUG_STREAM + if (stateChangeDebug()) { + foreach(const QDeclarativeAction &action, applyList) { + if (action.event) + qWarning() << " No transition for event:" << action.event->typeName(); + else + qWarning() << " No transition for:" << action.property.object() + << action.property.name() << "From:" << action.fromValue + << "To:" << action.toValue; + } + } +#endif + if (!transition) + complete(); +} + +void QDeclarativeTransitionManager::cancel() +{ + if (d->transition) { + // ### this could potentially trigger a complete in rare circumstances + d->transition->stop(); + d->transition = 0; + } + + for(int i = 0; i < d->bindingsList.count(); ++i) { + QDeclarativeAction action = d->bindingsList[i]; + if (!action.toBinding.isNull() && action.deletableToBinding) { + QDeclarativePropertyPrivate::setBinding(action.property, 0); + action.toBinding.data()->destroy(); + action.toBinding.clear(); + action.deletableToBinding = false; + } else if (action.event) { + //### what do we do here? + } + + } + d->bindingsList.clear(); + d->completeList.clear(); +} + +QT_END_NAMESPACE |