Effective exchange-wide from 12:00 AM ET, Saturday, November 14, 2026.
Taker fee tiers
Your taker fee tier is calculated daily using taker volume over the preceding 30 completed Eastern Time (ET) calendar days, excluding today. Volume is measured as described in How volume is measured.
This tier sets Θ in both the standard taker fee formula, including Table Tennis, and the combo taker fee formula. Combos use a separate fee curve.
New-account onboarding window
The window applies to retail and institutional accounts across trading channels whose first fill is on or after launch:- Day 1 is the ET calendar day of the account’s first filled order, maker or taker. There is no hourly proration.
- Days 1–7: taker fee coefficient
0.0695, regardless of volume. This boost applies to taker fees only; maker and taker rebate tiers use trailing 30-day volume. - Days 8–30: taker fee, maker rebate and taker rebate tiers use the higher of first-7-day volume ×
30/7and trailing 30-day volume. Maker volume sets the maker rebate tier; taker volume sets the taker fee and taker rebate tiers. - Day 31 onward: all three tiers use their respective trailing 30-day volume.
- Accounts with their first fill in the six days before launch receive the remaining days of their window. During November, existing accounts receive the better of their trailing 30-day tier or the tier based on October volume.
- Manual overrides take precedence over the boost and acceleration.
Standard Trading
For combo fees, see Combo Trading. Standard taker fees and maker rebates are computed using a symmetric formula that scales with price uncertainty:- C is the number of contracts
- p is the trade price ($0.01 to $0.99)
- Θ (theta) is the fee coefficient
The taker coefficient depends on your taker fee tier. The schedule by price and standard taker fee examples below use the Tier 4 coefficient of
0.0695. Maker rebates use the same tier coefficient in every market, including Table Tennis and crypto.
Rebate Tiers
Maker rebate tiers
Maker rebates apply to standard trades and are credited at the fill. Combo fills carry no maker rebate. Your maker rebate tier is set by your qualifying maker volume. See How tiers are set for the calculation window.Taker rebate tiers
Taker rebates are a percentage of the taker fees you paid, including combo taker fees, and are paid weekly. Your taker rebate tier is set by your qualifying taker volume. See How tiers are set for the calculation window.How tiers are set
- Rebate tiers use volume over the preceding 30 completed calendar days in Eastern Time (ET), excluding the current day. Tiers are set daily at 12:00 AM ET and apply until the next midnight.
- Maker rebate and taker rebate tiers are numbered and set independently. Your maker rebate tier (Tier 1 to Tier 4) uses maker volume only and your taker rebate tier (Tier 1 to Tier 6) uses taker volume only.
- All complementary programs, including accelerations and overrides, continue to apply. Taker rebates are paid weekly.
- Accelerated Tier Placement: A Participant may provide verifiable proof of their trailing-30-day notional trading volume on another prediction market and be assigned to the rebate tier corresponding to that volume.
How volume is measured
Dollar volume is the amount you paid for the position you received, not the face value of the contracts. For each fill, volume is the number of contracts multiplied by the price of the side you received.- Taker volume is your dollar volume on fills where your order removed liquidity from the book.
- Maker volume is your dollar volume on fills where your resting order was executed against.
- Combo fills count toward both maker and taker volume.
- Volume is measured in Eastern Time (ET), using the calculation window in How tiers are set. Voided fills are excluded.
API integratorsUse decoded values in the fee formulas:
C: the number of contracts.p: the execution price in decimal dollars.
price_scaleandfractional_quantity_scale: the price and quantity scaling factors.commission_notional_collected: the collected fee in scaled notional units.
Standard Fee Schedule by Price
This table shows a 100-contract example using Taker Tier 4 (0.0695) and Maker Tier 4 (-0.0104). Other tiers use their respective taker fee and maker rebate coefficients. Maker Tier 1 receives no rebate.
Standard Fee Rules
- Standard taker fees and maker rebates are symmetric around p = 0.50 and lowest near the extremes (0 and 1).
- All fees and rebates are rounded to the nearest $0.01 using banker’s rounding (round half to even).
- When an aggressive order fills against multiple resting orders, each fill is charged its banker’s-rounded fee, adjusted so that the total commission collected across the order’s fills never exceeds the banker’s rounding of the cumulative exact fee. The adjustment can only reduce a fill’s charge, never increase it. Maker rebates are computed per fill, independently.
Standard Fee Examples
Maker rebates in these examples use the Tier 4 coefficient (0.0104). At Tier 2 or Tier 3, use 0.0035 or 0.0070 instead. Tier 1 makers receive no rebate.Example 1: Buy 100 contracts at $0.10 — cheap contract
Buying a long shot. The fee scales with price uncertainty: p × (1 − p) = 0.10 × 0.90 = 0.09.- Buyer (taker): 0.0695 × 100 × 0.10 × 0.90 = −$0.63
- Seller (maker, Tier 4): 0.0104 × 100 × 0.10 × 0.90 = +$0.09
Example 2: Buy 100 contracts at $0.65 — expensive contract
Buying a likely outcome. Higher price but lower p × (1 − p) than midpoint.- Buyer (taker): 0.0695 × 100 × 0.65 × 0.35 = −$1.58
- Seller (maker, Tier 4): 0.0104 × 100 × 0.65 × 0.35 = +$0.24
Example 3: Sell 100 contracts at $0.30 — sell low probability
The seller is the aggressor. Both sides pay based on the same p × (1 − p) factor.- Seller (taker): 0.0695 × 100 × 0.30 × 0.70 = −$1.46
- Buyer (maker, Tier 4): 0.0104 × 100 × 0.30 × 0.70 = +$0.22
Example 4: Sell 100 contracts at $0.90 — sell high probability
When the price is close to $1.00, p × (1 − p) is small and fees are minimal.- Seller (taker): 0.0695 × 100 × 0.90 × 0.10 = −$0.63
- Buyer (maker, Tier 4): 0.0104 × 100 × 0.90 × 0.10 = +$0.09
Example 5: Buy 100 contracts at $0.50 — coin flip market
A 50/50 market. This is where the fee is highest per contract because p × (1 − p) = 0.25.- Buyer (taker): 0.0695 × 100 × 0.50 × 0.50 = −$1.74
- Seller (maker, Tier 4): 0.0104 × 100 × 0.50 × 0.50 = +$0.26
Combo Trading
Maker Fees
The combo maker fee is:Cis the number of contracts.pis the combo execution price in decimal dollars.
0.03 × 100 × 0.10 × 0.90 = $0.27.
Taker Fees
The combo taker fee is:Cis the number of contracts.pis the combo execution price in decimal dollars.- The curve applies to the combo execution as a whole, not separately to its component legs.
Combo Fee Schedule by Price
Taker fees use the Tier 4 coefficient Θ =0.0695; for other tiers, use your taker fee coefficient in the formula above.
Each row assumes a single fill of 100 contracts. Fees are rounded to the nearest cent using banker’s rounding. Taker amounts are before any taker rebate.
Combo Fee Examples
Both examples assume a single fill and a Tier 4 taker coefficient of0.0695. Taker amounts are before any taker rebate.
Example 1: Buy 100 combo contracts at $0.10
- Buyer (taker): 100 × 0.10 × [0.0695 × 0.90 + 0.06 × 0.90^4] = $1.01916 → −$1.02
- Seller (maker): 0.03 × 100 × 0.10 × 0.90 = −$0.27
Example 2: Buy 100 combo contracts at $0.25
- Buyer (taker): 100 × 0.25 × [0.0695 × 0.75 + 0.06 × 0.75^4] = $1.777734375 → −$1.78
- Seller (maker): 0.03 × 100 × 0.25 × 0.75 = $0.5625 → −$0.56