| Age | Commit message (Collapse) | Author |
|---|
|
Commit 161a3e8b68 taught pg_upgrade to use COPY for large object
metadata for upgrades from v12 and newer, which is much faster to
restore than the proper large object commands. For upgrades from
v16 and newer, we can take this a step further and transfer the
large object metadata files as if they were user tables. We can't
transfer the files from older versions because the aclitem data
type (needed by pg_largeobject_metadata.lomacl) changed its storage
format in v16 (see commit 7b378237aa). Note that this commit is
essentially a revert of commit 12a53c732c.
There are a couple of caveats. First, we still need to COPY the
corresponding pg_shdepend rows for large objects. Second, we need
to COPY anything in pg_largeobject_metadata with a comment or
security label, else restoring those will fail. This means that an
upgrade in which every large object has a comment or security label
won't gain anything from this commit, but it should at least avoid
making those unusual use-cases any worse.
pg_upgrade must also take care to transfer the relfilenodes of
pg_largeobject_metadata and its index, as was done for
pg_largeobject in commits d498e052b4 and bbe08b8869.
Reviewed-by: Michael Paquier <[email protected]>
Discussion: https://postgr.es/m/aJ3_Gih_XW1_O2HF%40nathan
|
|
Presently, pg_upgrade assumes that all non-default tablespaces
don't move to different directories during upgrade. Unfortunately,
this isn't true for in-place tablespaces, which move to the new
cluster's pg_tblspc directory. This commit teaches pg_upgrade to
handle in-place tablespaces by retrieving the tablespace
directories for both the old and new clusters. In turn, we can
relax the prohibition on non-default tablespaces for same-version
upgrades, i.e., if all non-default tablespaces are in-place,
pg_upgrade may proceed.
This change is primarily intended to enable additional pg_upgrade
testing with non-default tablespaces, as is done in
006_transfer_modes.pl.
Reviewed-by: Corey Huinker <[email protected]>
Reviewed-by: Michael Paquier <[email protected]>
Discussion: https://postgr.es/m/aA_uBLYMUs5D66Nb%40nathan
|
|
Logical replication requires reliable conflict detection to maintain data
consistency across nodes. To achieve this, we must prevent premature
removal of tuples deleted by other origins and their associated commit_ts
data by VACUUM, which could otherwise lead to incorrect conflict reporting
and resolution.
This patch introduces a mechanism to retain deleted tuples on the
subscriber during the application of concurrent transactions from remote
nodes. Retaining these tuples allows us to correctly ignore concurrent
updates to the same tuple. Without this, an UPDATE might be misinterpreted
as an INSERT during resolutions due to the absence of the original tuple.
Additionally, we ensure that origin metadata is not prematurely removed by
vacuum freeze, which is essential for detecting update_origin_differs and
delete_origin_differs conflicts.
To support this, a new replication slot named pg_conflict_detection is
created and maintained by the launcher on the subscriber. Each apply
worker tracks its own non-removable transaction ID, which the launcher
aggregates to determine the appropriate xmin for the slot, thereby
retaining necessary tuples.
Conflict information retention (deleted tuples and commit_ts) can be
enabled per subscription via the retain_conflict_info option. This is
disabled by default to avoid unnecessary overhead for configurations that
do not require conflict resolution or logging.
During upgrades, if any subscription on the old cluster has
retain_conflict_info enabled, a conflict detection slot will be created to
protect relevant tuples from deletion when the new cluster starts.
This is a foundational work to correctly detect update_deleted conflict
which will be done in a follow-up patch.
Author: Zhijie Hou <[email protected]>
Reviewed-by: shveta malik <[email protected]>
Reviewed-by: Masahiko Sawada <[email protected]>
Reviewed-by: Dilip Kumar <[email protected]>
Reviewed-by: Nisha Moond <[email protected]>
Reviewed-by: Amit Kapila <[email protected]>
Discussion: https://postgr.es/m/OS0PR01MB5716BE80DAEB0EE2A6A5D1F5949D2@OS0PR01MB5716.jpnprd01.prod.outlook.com
|
|
This new option instructs pg_upgrade to move the data directories
from the old cluster to the new cluster and then to replace the
catalog files with those generated for the new cluster. This mode
can outperform --link, --clone, --copy, and --copy-file-range,
especially on clusters with many relations.
However, this mode creates many garbage files in the old cluster,
which can prolong the file synchronization step if
--sync-method=syncfs is used. To handle that, we recommend using
--sync-method=fsync with this mode, and pg_upgrade internally uses
"initdb --sync-only --no-sync-data-files" for file synchronization.
pg_upgrade will synchronize the catalog files as they are
transferred. We assume that the database files transferred from
the old cluster were synchronized prior to upgrade.
This mode also complicates reverting to the old cluster, so we
recommend restoring from backup upon failure during or after file
transfer. We did consider teaching pg_upgrade how to generate a
revert script for such failures, but we decided against it due to
the rarity of failing during file transfer, the complexity of
generating the script, and the potential for misusing the script.
The new mode is limited to clusters located in the same file
system. With some effort, we could probably support upgrades
between different file systems, but this mode is unlikely to offer
much benefit if we have to copy the files across file system
boundaries.
It is also limited to upgrades from version 10 or newer. There are
a few known obstacles for using swap mode to upgrade from older
versions. For example, the visibility map format changed in v9.6,
and the sequence tuple format changed in v10. In fact, swap mode
omits the --sequence-data option in its uses of pg_dump and instead
reuses the old cluster's sequence data files. While teaching swap
mode to deal with these kinds of changes is surely possible (and we
may have to deal with similar problems in the future, anyway), it
doesn't seem worth the effort to support upgrades from
long-unsupported versions.
Reviewed-by: Greg Sabino Mullane <[email protected]>
Reviewed-by: Robert Haas <[email protected]>
Discussion: https://postgr.es/m/Zyvop-LxLXBLrZil%40nathan
|
|
Backpatch-through: 13
|
|
|
|
This commit makes use of the new task framework in pg_upgrade to
parallelize retrieving relation and logical slot information. This
step will now process multiple databases concurrently when
pg_upgrade's --jobs option is provided a value greater than 1.
Reviewed-by: Daniel Gustafsson, Ilya Gladyshev
Discussion: https://postgr.es/m/20240516211638.GA1688936%40nathanxps13
|
|
|
|
At the moment, pg_upgrade stores whether it is doing a "live check"
(i.e., the user specified --check and the old server is still
running) in a local variable scoped to main(). This live_check
variable is passed to several functions. To further complicate
matters, a few call sites provide a hard-coded "false" as the
live_check argument. Specifically, this is done when calling these
functions for the new cluster, for which any live-check-only paths
won't apply.
This commit moves the live_check variable to the global user_opts
variable, which stores information about the options the user
specified on the command line. This allows us to remove the
live_check parameter from several functions. For the functions
with callers that provide a hard-coded "false" as the live_check
argument (e.g., get_control_data()), we verify the given cluster is
the old cluster before taking any live-check-only paths.
This small refactoring effort helps simplify some proposed changes
that would parallelize many of pg_upgrade's once-in-each-database
tasks using libpq's asynchronous APIs. By removing the live_check
parameter, we can more easily convert the functions to callbacks
for the new parallel system.
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20240516211638.GA1688936%40nathanxps13
|
|
Presently, pg_upgrade obtains the number of subscriptions in the
to-be-upgraded cluster by first querying pg_subscription in every
database for the number of subscriptions in only that database.
Then, in count_old_cluster_subscriptions(), it adds all the values
collected in the first step. This is expensive, especially when
there are many databases.
Fortunately, there is a better way to retrieve the subscription
count. Since pg_subscription is a shared catalog, we only need to
connect to a single database and query it once. This commit
modifies pg_upgrade to use that approach, which also allows us to
trim several lines of code. In passing, move the call to
get_db_subscription_count(), which has been renamed to
get_subscription_count(), from get_db_rel_and_slot_infos() to the
dedicated >= v17 section in check_and_dump_old_cluster().
We may be able to make similar improvements to
get_old_cluster_logical_slot_infos(), but that is left as a future
exercise.
Reviewed-by: Michael Paquier, Amit Kapila
Discussion: https://postgr.es/m/ZprQJv_TxccN3tkr%40nathan
Backpatch-through: 17
|
|
Till now, the reason for replication slot invalidation is not tracked
directly in pg_replication_slots. A recent commit 007693f2a3 added
'conflict_reason' to show the reasons for slot conflict/invalidation, but
only for logical slots.
This commit adds a new column 'invalidation_reason' to show invalidation
reasons for both physical and logical slots. And, this commit also turns
'conflict_reason' text column to 'conflicting' boolean column (effectively
reverting commit 007693f2a3). The 'conflicting' column is true for
invalidation reasons 'rows_removed' and 'wal_level_insufficient' because
those make the slot conflict with recovery. When 'conflicting' is true,
one can now look at the new 'invalidation_reason' column for the reason
for the logical slot's conflict with recovery.
The new 'invalidation_reason' column will also be useful to track other
invalidation reasons in the future commit.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Amit Kapila, Shveta Malik
Discussion: https://www.postgresql.org/message-id/ZfR7HuzFEswakt/a%40ip-10-97-1-34.eu-west-3.compute.internal
Discussion: https://www.postgresql.org/message-id/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
|
|
Rename pg_collation.colliculocale to colllocale, and
pg_database.daticulocale to datlocale. These names reflects that the
fields will be useful for the upcoming builtin provider as well, not
just for ICU.
This is purely a rename; no changes to the meaning of the fields.
Discussion: https://postgr.es/m/ff4c2f2f9c8fc7ca27c1c24ae37ecaeaeaff6b53.camel%40j-davis.com
Reviewed-by: Peter Eisentraut
|
|
This commit adds the failover property to the replication slot. The
failover property indicates whether the slot will be synced to the standby
servers, enabling the resumption of corresponding logical replication
after failover. But note that this commit does not yet include the
capability to sync the replication slot; the subsequent commits will add
that capability.
A new optional parameter 'failover' is added to the
pg_create_logical_replication_slot() function. We will also enable to set
'failover' option for slots via the subscription commands in the
subsequent commits.
The value of the 'failover' flag is displayed as part of
pg_replication_slots view.
Author: Hou Zhijie, Shveta Malik, Ajin Cherian
Reviewed-by: Peter Smith, Bertrand Drouvot, Dilip Kumar, Masahiko Sawada, Nisha Moond, Kuroda, Hayato, Amit Kapila
Discussion: https://postgr.es/m/[email protected]
|
|
|
|
This patch changes the existing 'conflicting' field to 'conflict_reason'
in pg_replication_slots. This new field indicates the reason for the
logical slot's conflict with recovery. It is always NULL for physical
slots, as well as for logical slots which are not invalidated. The
non-NULL values indicate that the slot is marked as invalidated. Possible
values are:
wal_removed = required WAL has been removed.
rows_removed = required rows have been removed.
wal_level_insufficient = the primary doesn't have a wal_level sufficient
to perform logical decoding.
The existing users of 'conflicting' column can get the same answer by
using 'conflict_reason' IS NOT NULL.
Author: Shveta Malik
Reviewed-by: Amit Kapila, Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/[email protected]
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/[email protected]
Backpatch-through: 12
|
|
This feature will allow us to replicate the changes on subscriber nodes
after the upgrade.
Previously, only the subscription metadata information was preserved.
Without the list of relations and their state, it's not possible to
re-enable the subscriptions without missing some records as the list of
relations can only be refreshed after enabling the subscription (and
therefore starting the apply worker). Even if we added a way to refresh
the subscription while enabling a publication, we still wouldn't know
which relations are new on the publication side, and therefore should be
fully synced, and which shouldn't.
To preserve the subscription relations, this patch teaches pg_dump to
restore the content of pg_subscription_rel from the old cluster by using
binary_upgrade_add_sub_rel_state SQL function. This is supported only
in binary upgrade mode.
The subscription's replication origin is needed to ensure that we don't
replicate anything twice.
To preserve the replication origins, this patch teaches pg_dump to update
the replication origin along with creating a subscription by using
binary_upgrade_replorigin_advance SQL function to restore the
underlying replication origin remote LSN. This is supported only in
binary upgrade mode.
pg_upgrade will check that all the subscription relations are in 'i'
(init) or in 'r' (ready) state and will error out if that's not the case,
logging the reason for the failure. This helps to avoid the risk of any
dangling slot or origin after the upgrade.
Author: Vignesh C, Julien Rouhaud, Shlok Kyal
Reviewed-by: Peter Smith, Masahiko Sawada, Michael Paquier, Amit Kapila, Hayato Kuroda
Discussion: https://postgr.es/m/20230217075433.u5mjly4d5cr4hcfe@jrouhaud
|
|
Commit 29d0a77fa introduced fetching slot information from the old cluster
but didn't initialize the required array in all the code paths. So when
trying to access the array in verbose mode for the new cluster, it leads
to an uninitialized memory access.
Author: Vignesh C
Discussion: http://postgr.es/m/CALDaNm1tntGP5=CtMz=v+k3_PGv7kE9t6iWSgX-QiurAaFkhZw@mail.gmail.com
|
|
While reading information from the old cluster, a list of logical
slots is fetched. At the later part of upgrading, pg_upgrade revisits the
list and restores slots by executing pg_create_logical_replication_slot()
on the new cluster. Migration of logical replication slots is only
supported when the old cluster is version 17.0 or later.
If the old node has invalid slots or slots with unconsumed WAL records,
the pg_upgrade fails. These checks are needed to prevent data loss.
The significant advantage of this commit is that it makes it easy to
continue logical replication even after upgrading the publisher node.
Previously, pg_upgrade allowed copying publications to a new node. With
this patch, adjusting the connection string to the new publisher will
cause the apply worker on the subscriber to connect to the new publisher
automatically. This enables seamless continuation of logical replication,
even after an upgrade.
Author: Hayato Kuroda, Hou Zhijie
Reviewed-by: Peter Smith, Bharath Rupireddy, Dilip Kumar, Vignesh C, Shlok Kyal
Discussion: http://postgr.es/m/TYAPR01MB58664C81887B3AF2EB6B16E3F5939@TYAPR01MB5866.jpnprd01.prod.outlook.com
Discussion: http://postgr.es/m/CAA4eK1+t7xYcfa0rEQw839=b2MzsfvYDPz3xbD+ZqOdP3zpKYg@mail.gmail.com
|
|
Author: Peter Smith
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/CAHut+PuOB4bUwkYAjA_NkTrYaocKy6W3ZYK5Pin305R7mNSLgA@mail.gmail.com
|
|
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/[email protected]
|
|
Discussion: https://postgr.es/m/[email protected]
Reported-by: Andrew Dunstan
|
|
Previously, pg_upgrade checked that the old and new clusters were
compatible, including the locale and encoding. But the new cluster was
just created, and only template0 from the new cluster will be
preserved (template1 and postgres are both recreated during the
upgrade process).
Because template0 is not sensitive to locale or encoding, just update
the pg_database entry to be the same as template0 from the original
cluster.
This commit makes it easier to change the default initdb locale or
encoding settings without causing needless incompatibilities.
Discussion: https://postgr.es/m/[email protected]
Reviewed-by: Peter Eisentraut
|
|
While on it, newlines are removed from the end of two elog() strings.
The others are simple grammar mistakes. One comment in pg_upgrade
referred incorrectly to sequences since a7e5457.
Author: Justin Pryzby
Discussion: https://postgr.es/m/[email protected]
Backpatch-through: 11
|
|
Backpatch-through: 11
|
|
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
|
|
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
|
|
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <[email protected]>
Reviewed-By: David Rowley <[email protected]>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
|
|
When checking whether the major version supports per-database locale
providers, it was always looking at the version of the old cluster
instead of the cluster that was passed in. This would lead to
failures to detect locale provider mismatches.
Reported-by: Marina Polyakova <[email protected]>
Reviewed-by: Julien Rouhaud <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/f385ba25e7f8be427b8c582e5cca7d79%40postgrespro.ru#515a31c5429d6d37ad1d5c9d66962a1e
|
|
pg_upgrade does not use common/logging.c, which is unfortunate
but changing it to do so seems like more work than is justified.
However, we really need to make it work more like common/logging.c
in one respect: the latter expects supplied message strings to not
end with a newline, instead adding one internally. As it stands,
pg_upgrade's logging facilities expect a caller-supplied newline
in some cases and not others, which is already an invitation to bugs,
but the inconsistency with our other frontend code makes it worse.
There are already several places with missing or extra newlines,
and it's inevitable that there won't be more if we let this stand.
Hence, run around and get rid of all trailing newlines in message
strings, and add an Assert that there's not one, similar to the
existing Assert in common/logging.c. Adjust the logging functions
to supply a newline at the right places.
(Some of these strings also have a *leading* newline, which would
be a good thing to get rid of too; but this patch doesn't attempt
that.)
There are some consequent minor changes in output. The ones that
aren't outright bug fixes are generally removal of extra blank
lines that the original coding intentionally inserted. It didn't
seem worth being bug-compatible with that.
Patch by me, reviewed by Kyotaro Horiguchi and Peter Eisentraut
Discussion: https://postgr.es/m/[email protected]
|
|
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
|
|
Reported-by: Justin Pryzby <[email protected]>
Discussion: https://www.postgresql.org/message-id/[email protected]
|
|
This adds the option to use ICU as the default locale provider for
either the whole cluster or a database. New options for initdb,
createdb, and CREATE DATABASE are used to select this.
Since some (legacy) code still uses the libc locale facilities
directly, we still need to set the libc global locale settings even if
ICU is otherwise selected. So pg_database now has three
locale-related fields: the existing datcollate and datctype, which are
always set, and a new daticulocale, which is only set if ICU is
selected. A similar change is made in pg_collation for consistency,
but in that case, only the libc-related fields or the ICU-related
field is set, never both.
Reviewed-by: Julien Rouhaud <[email protected]>
Discussion: https://www.postgresql.org/message-id/flat/5e756dd6-0e91-d778-96fd-b1bcb06c161a%402ndquadrant.com
|
|
Commit 9a974cbcba005256a19991203583a94b4f9a21a9 arranged to preserve
relfilenodes and tablespace OIDs. For similar reasons, also arrange
to preserve database OIDs.
One problem is that, up until now, the OIDs assigned to the template0
and postgres databases have not been fixed. This could be a problem
when upgrading, because pg_upgrade might try to migrate a database
from the old cluster to the new cluster while keeping the OID and find
a different database with that OID, resulting in a failure. If it finds
a database with the same name and the same OID that's OK: it will be
dropped and recreated. But the same OID and a different name is a
problem.
To prevent that, fix the OIDs for postgres and template0 to specific
values less than 16384. To avoid running afoul of this rule, these
values should not be changed in future releases. It's not a problem
that these OIDs aren't fixed in existing releases, because the OIDs
that we're assigning here weren't used for either of these databases
in any previous release. Thus, there's no chance that an upgrade of
a cluster from any previous release will collide with the OIDs we're
assigning here. And going forward, the OIDs will always be fixed, so
the only potential collision is with a system database having the
same name and the same OID, which is OK.
This patch lets users assign a specific OID to a database as well,
provided however that it can't be less than 16384. I (rhaas) thought
it might be better not to expose this capability to users, but the
consensus was otherwise, so the syntax is documented. Letting users
assign OIDs below 16384 would not be OK, though, because a
user-created database with a low-numbered OID might collide with a
system-created database in a future release. We therefore prohibit
that.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
Discussion: http://postgr.es/m/CAASxf_Mnwm1Dh2vd5FAhVX6S1nwNSZUB1z12VddYtM++H2+p7w@mail.gmail.com
|
|
Currently, database OIDs, relfilenodes, and tablespace OIDs can all
change when a cluster is upgraded using pg_upgrade. It seems better
to preserve them, because (1) it makes troubleshooting pg_upgrade
easier, since you don't have to do a lot of work to match up files
in the old and new clusters, (2) it allows 'rsync' to save bandwidth
when used to re-sync a cluster after an upgrade, and (3) if we ever
encrypt or sign blocks, we would likely want to use a nonce that
depends on these values.
This patch only arranges to preserve relfilenodes and tablespace
OIDs. The task of preserving database OIDs is left for another patch,
since it involves some complexities that don't exist in these cases.
Database OIDs have a similar issue, but there are some tricky points
in that case that do not apply to these cases, so that problem is left
for another patch.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
|
|
Backpatch-through: 10
|
|
Per discussion, we'll limit support for old servers to those branches
that can still be built easily on modern platforms, which as of now
is 9.2 and up.
Discussion: https://postgr.es/m/[email protected]
|
|
Backpatch-through: 9.5
|
|
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
|
Similar to commit 7e735035f2, this commit makes the order of header file
inclusion consistent for non-backend modules.
In passing, fix the case where we were using angle brackets (<>) for the
local module includes instead of quotes ("").
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
|
|
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
|
This feature was using a process local map to track the first few blocks
in the relation. The map was reset each time we get the block with enough
freespace. It was discussed that it would be better to track this map on
a per-relation basis in relcache and then invalidate the same whenever
vacuum frees up some space in the page or when FSM is created. The new
design would be better both in terms of API design and performance.
List of commits reverted, in reverse chronological order:
06c8a5090e Improve code comments in b0eaa4c51b.
13e8643bfc During pg_upgrade, conditionally skip transfer of FSMs.
6f918159a9 Add more tests for FSM.
9c32e4c350 Clear the local map when not used.
29d108cdec Update the documentation for FSM behavior..
08ecdfe7e5 Make FSM test portable.
b0eaa4c51b Avoid creation of the free space map for small heap relations.
Discussion: https://postgr.es/m/[email protected]
|
|
If a heap on the old cluster has 4 pages or fewer, and the old cluster
was PG v11 or earlier, don't copy or link the FSM. This will shrink
space usage for installations with large numbers of small tables.
This will allow pg_upgrade to take advantage of commit b0eaa4c51b where
we have avoided creation of the free space map for small heap relations.
Author: John Naylor
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CACPNZCu4cOdm3uGnNEGXivy7Gz8UWyQjynDpdkPGabQ18_zK6g%40mail.gmail.com
|
|
Backpatch-through: certain files through 9.4
|
|
pg_upgrade previously copied pg_largeobject_metadata over from the old
cluster. That doesn't work, because the table has oids before
578b229718. I missed that.
As most pieces of metadata for large objects already were dumped as
DDL (except for comments overwritten by pg_upgrade, due to the copy of
pg_largeobject_metadata) it seems reasonable to just also dump grants
for large objects. If we ever consider this a relevant performance
problem, we'd need to fix the rest of the already emitted DDL
too.
There's still an open discussion about whether we'll want to force a
specific ordering for the dumped objects, as currently
pg_largeobjects_metadata potentially has a different ordering
before/after pg_upgrade, which can make automated testing a bit
harder.
Reported-By: Andrew Dunstan
Author: Andres Freund
Discussion: https://postgr.es/m/[email protected]
|
|
Everything of use to frontend code should now appear in the _d.h files,
and making this change frees us from needing to worry about whether the
catalog header files proper are frontend-safe.
Remove src/interfaces/ecpg/ecpglib/pg_type.h entirely, as the previous
commit reduced it to a confusingly-named wrapper around pg_type_d.h.
In passing, make test_rls_hooks.c follow project convention of including
our own files with #include "" not <>.
Discussion: https://postgr.es/m/[email protected]
|
|
Backpatch-through: certain files through 9.3
|
|
Author: Masahiko Sawada <[email protected]>
|
|
The original wording was impossible to translate correctly.
Discussion: https://postgr.es/m/[email protected]
|
|
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/[email protected]
|
