Open Source Raspberry Pi Software

Tria O.S. detects hard & soft specs of the PC where you run it, you can load this info or specify it manually to let the program inform you what would be the best operating system for a specific PC, with the specified hardware, and then see the difference by adding RAM, a SSD hard drive, changing the graphics card ... etc. REQUIREMENTS: For Linux, you need GAMBAS 3.3 or later, so you will have to install the gambas3 package before installing. 90's EDITION needs 160 MB (192 MB on a virtual machine) of RAM and works with Windows 95 and Windows NT 4.0. BRONTOSAURUS EDITION needs DirectX 9.0c and .Net Framework 2.0 and runs on Windows 98, Windows 98 SE, Windows ME & Windows 2000. XP EDITION requires .Net Framework 4.0 or newer. Runs on Windows XP, Vista, Server 2003, 2003 R2, Home Server and Server 2008. STANDARD EDITION needs .Net Framework 4.8 or 4.8.1 and runs on Windows 7, Windows Server 2008 R2, and newer (any Windows released from 2009 until today).

KeexyBox allows you to do parental control, block ads, limit telemetry, and browse the Internet anonymously from your home network without installing any software on your devices. It also can be used to create a public wireless access point with the captive portal. It is a software program which requires a Raspberry PI box and which is installed on Raspbian. It constitutes a cut-off point between your devices (computers, tablets, smartphones, etc.) and your router or Internet box. KeexyBox acts as a default gateway and DNS server for the devices in your home network. It thus intercepts all connections to the Internet to carry out website filtering or to activate browsing via the Tor anonymity network according to connection profiles which you have configured.

AquarioPi is an IR controller that will change the light settings around the clock on multiple lights, and multiple brands of infrared (IR) remote controlled lights. All that's required is a Raspberry Pi, a resistor, an IR LED, and a breadboard or other type of circuit board or connection to the LED and resistor. Visit the AquarioPi Wiki for more information.