gnuwin32-users Mailing List for GnuWin

Project: GnuWin32  (gnuwin32)
Package: grep
Date   : 2008-07-26 16:23

Project "GnuWin32" ('gnuwin32') has released the new version of package 'grep'.
You can download it from SourceForge.net by following this link:
<https://sourceforge.net/project/showfiles.php?group_id=23617&release_id=615823>
or browse Release Notes and ChangeLog by visiting this link:
<https://sourceforge.net/project/shownotes.php?release_id=615823> 

You receive this email because you requested to be notified when new versions
of this package were released. If you don't wish to be notified in the future,
please login to SourceForge.net and click this link:
<https://sourceforge.net/project/filemodule_unmonitor.php?filemodule_id=16425>
If you lost your SourceForge.net login name or password, refer to this document:
<https://sourceforge.net/docman/display_doc.php?docid=760&group_id=1>

Note that you may receive this message indirectly via one of your mailing list
subscriptions. Please review message headers before reporting unsolicited
mailings.

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
GnuWin32-Announce mailing list
Gnu...@li...
https://lists.sourceforge.net/lists/listinfo/gnuwin32-announce

Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=5116366
By: brandwizard

Thanks for your answer. The problem occurs only if the tiff file has jpeg
compression. Both xnview and netpbm's tifftopbm also have problems reading this
kind of file. netpbm says: "tifftopnm: don't know how to handle PHOTOMETRIC_YCBCR"
and xnview says: "can't read file". I will submit my question to the libtiff
mailing list. Thanks.

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=74807

Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=5116202
By: gnuwin32

I've (finally) looked into this. It appears that this behavior is by design,
so actually it is a feature. Basically grep behaves in this way because it can
also grep binary files (this s advertised as an option and a possible use
of grep), for which conversion to CRLF would be inappropriate. In general, I'm
not in favor of changing behavior that is by design; instead one should address
the maintainer. The one possibility I see for such a request would be a combination
of the -a (--text) option with CRLF conversion, since then the user explicitly
requests all files to be viewed as text files, and so all output might be regarded
as text output.
In the port of grep-2.5.3, I will for the time being implement this combination
of --text and CRLF output, provided no-one objects, beforehand or later.


______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=74807

Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=5116157
By: gnuwin32

It depends on what you want to achieve. If you want a one-time conversion of
tiff files to jpeg or gif, then you can use most converter programs. E.g. with
XnView (http://www.xnview.com)  it is possible to do such a conversion, even
in a batch series. However, if you want to include such a conversion possibility
in a more general way in another program, this is probably best done by using
a library. I'm not sure that libtiff is the best choice for this (there is no
tiff2jpeg program provided with libtiff), but you may get a more authorative
answer from the libtiff mailing list (http://www.remotesensing.org/libtiff).
Perhaps the netpbm library is more appropriate; you should first convert the
tiff file to pnm format and then the pnm file to jpeg or gif.

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=74807

Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=5115465
By: brandwizard

Hi, I need to create jpeg and gif thumbnails from tiff files. I'm using ImageMagick
for that but when a tiff file is jpeg compressed I'm getting errors. I was told
that I need to use LibTIFF library. The problem is that I don't have much experience
with all of this and really confused. What should I do in order to create previews
in my .NET project. Should I use a dll (what dll?) should I use command lines
(I couldn't find any command line examples). Thank you very much for your help!

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=74807

Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=5113577
By: kl31n

I completed the binary diff. Substituting every "OD0A" with "0A", so "\r\n"
with "\n", the gif file that gets generated works ok. Somebody has an idea on
how to fix this in the library?

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=74807

Project: GnuWin32  (gnuwin32)
Package: rpl
Date   : 2008-07-19 14:33

Project "GnuWin32" ('gnuwin32') has released the new version of package 'rpl'.
You can download it from SourceForge.net by following this link:
<https://sourceforge.net/project/showfiles.php?group_id=23617&release_id=614424>
or browse Release Notes and ChangeLog by visiting this link:
<https://sourceforge.net/project/shownotes.php?release_id=614424> 

You receive this email because you requested to be notified when new versions
of this package were released. If you don't wish to be notified in the future,
please login to SourceForge.net and click this link:
<https://sourceforge.net/project/filemodule_unmonitor.php?filemodule_id=75019>
If you lost your SourceForge.net login name or password, refer to this document:
<https://sourceforge.net/docman/display_doc.php?docid=760&group_id=1>

Note that you may receive this message indirectly via one of your mailing list
subscriptions. Please review message headers before reporting unsolicited
mailings.

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
GnuWin32-Announce mailing list
Gnu...@li...
https://lists.sourceforge.net/lists/listinfo/gnuwin32-announce

Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=5100417
By: aakoch

I concur.

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=74807

Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=5099583
By: kl31n

I'm having some strange problems with plotutils. I'm using eclipse 4.0 + mingw
c++ 3.4.5 + libplotter from plotutils 2.4.1. Everything compiles and links
(statically) ok, but the output of a GIFPlotter is wrong(that's to say the file
can't be visualized). I tried to use a PNGPlotter with libpng 1.2.8 + zlib 1.2.3
(also statically linked), but no improvement. The same code works ok under Linux
with Plotutils 2.5.x both with a GIFPlotter and a PNGPlotter. SVGPlotter and
PSPlotter work ok both under Linux an Windows.

Apparently the genereated .gif and .png files are slightly shorter than what
they are in the linux version, but I didn't do a binary diff yet. I tried to
add "plotter.flushpl();" but didn't help.

This is how the compiler is invoked:

g++ -IC:\Program Files\GnuWin32\include -O0 -g3 -Wall -c -fmessage-length=0
-osrc\m2m.o ..\src\m2m.cpp

for the linker:

g++ -LC:\Program Files\GnuWin32\lib -Xlinker -static -om2m.exe src\m2m.o
src\colormap.o -lplotter

The code I can replicate the problem with is the most basic one can think of
and can be found below. I would really appreciate some help on this because
I would like to stop using a linux virtual machine on a system that works poorly
already(but on which I can't really change much due to company cr...ehm,
policies).

Thanks for your attention,

kl31n

//BEGIN CODE---file: m2m.cpp

#define X_DISPLAY_MISSING
#include <plotter.h>
#include <fstream>

int main() {

	std::ofstream output("c:\\test.gif");
	Plotter::parampl("BITMAPSIZE", (void*)"1000x1000");
	GIFPlotter plotter(std::cin, output, std::cerr);

	plotter.openpl();
	plotter.fspace (0.0, 0.0, 1000.0, 1000.0);
	plotter.flinewidth (0.25);
	plotter.pencolorname ("red");
	plotter.erase ();
	plotter.fmove (250.0, 250.0);
	plotter.fcont(750.0,750.0);
	plotter.closepl();

        return 0;
}

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=74807

---------- Forwarded message ----------
From: Alfio Castorina <liq...@gm...>
Date: Mon, Jul 14, 2008 at 9:43 AM
Subject: Re: [GnuWin32-Users] GSL Library - Run-Time Check Failure #0
To: GnuWin32 <gnu...@us...>


If I define it, I get a linker error for all the GSL functions....

On Sat, Jul 12, 2008 at 1:02 PM, GnuWin32
<gnu...@us...> wrote:
> In: Project / <project> Properties... / Configuration Properties / C/C++ /
> Preprocessor / Preprocessor Definitions
>
> --------------------------------------------------
> Van: "Alfio Castorina"
> Datum: zaterdag 12 juli 2008 11:35 vm
> Aan: "GnuWin32"
> Onderwerp: Re: [GnuWin32-Users] GSL Library - Run-Time Check Failure #0
>
>>> Did you compile with the preprocessor symbol GSL_DLL defined?
>>
>> No. Should I ? If yes, where should I put this inside the Visual C++
>> Project?
>>
>> Actually I was able to get rid of the error by decreasing the compiler
>> error level check...
>>
>

Project: GnuWin32  (gnuwin32)
Package: zip
Date   : 2008-07-13 12:24

Project "GnuWin32" ('gnuwin32') has released the new version of package 'zip'.
You can download it from SourceForge.net by following this link:
<https://sourceforge.net/project/showfiles.php?group_id=23617&release_id=613180>
or browse Release Notes and ChangeLog by visiting this link:
<https://sourceforge.net/project/shownotes.php?release_id=613180> 

You receive this email because you requested to be notified when new versions
of this package were released. If you don't wish to be notified in the future,
please login to SourceForge.net and click this link:
<https://sourceforge.net/project/filemodule_unmonitor.php?filemodule_id=16432>
If you lost your SourceForge.net login name or password, refer to this document:
<https://sourceforge.net/docman/display_doc.php?docid=760&group_id=1>

Note that you may receive this message indirectly via one of your mailing list
subscriptions. Please review message headers before reporting unsolicited
mailings.

-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
GnuWin32-Announce mailing list
Gnu...@li...
https://lists.sourceforge.net/lists/listinfo/gnuwin32-announce

In: Project / <project> Properties... / Configuration Properties / C/C++ / 
Preprocessor / Preprocessor Definitions

--------------------------------------------------
Van: "Alfio Castorina"
Datum: zaterdag 12 juli 2008 11:35 vm
Aan: "GnuWin32"
Onderwerp: Re: [GnuWin32-Users] GSL Library - Run-Time Check Failure #0

>> Did you compile with the preprocessor symbol GSL_DLL defined?
>
> No. Should I ? If yes, where should I put this inside the Visual C++ 
> Project?
>
> Actually I was able to get rid of the error by decreasing the compiler
> error level check...
> 

Did you compile with the preprocessor symbol GSL_DLL defined?

--------------------------------------------------
Van: "Alfio Castorina" <liq...@gm...>
Datum: maandag 7 juli 2008 12:59 nm
Aan: <gnu...@li...>
Onderwerp: [GnuWin32-Users] GSL Library - Run-Time Check Failure #0

> Hi, I'm having a serious and very urgent problem with GSL 1.8 on
> Visual C ++ 2003.
>
> I'm trying to use Levenberg Marquadt and I'm obtaining the following
> run time error.
>
>
> Run-Time Check Failure #0 - The value of ESP was not properly saved across 
> a
> function call.  This is usually a result of calling a function declared 
> with
> one calling convention with a function pointer declared with a different
> calling convention.
>
>
>
> At first I tought it was a problem with my program but even testing
> the sample program found here
> http://www.csse.uwa.edu.au/programming/gsl-1.0/gsl-ref_35.html gives
> me exactly the same error.
> I'm in big troubles, since I have no clues on what to do.
> Thanks.
>
>
> Run-Time Check Failure #0 - The value of ESP was not properly saved across 
> a
> function call.  This is usually a result of calling a function declared 
> with
> one calling convention with a function pointer declared with a different
> calling convention.
>
> -------------------------------------------------------------------------
> Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
> Studies have shown that voting for your favorite open source project,
> along with a healthy diet, reduces your potential for chronic lameness
> and boredom. Vote Now at http://www.sourceforge.net/community/cca08
> _______________________________________________
> GnuWin32-Users mailing list
> Gnu...@li...
> https://lists.sourceforge.net/lists/listinfo/gnuwin32-users
> 

Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=5084713
By: jdiedrich

Try 
gsar -sDUMMYPATH -r"C:/Program Files/MyApp" -f MyApp.ini

or
gsar -sDUMMYPATH -r"C:\\Program Files\\MyApp" -f MyApp.ini


______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=74807

Hi GNUWin32,

I'm the author of the Internet site http://www.livinginternet.com/ with a 
lot of input from original creators of the Internet.  I was lucky enough to 
get the FreeOpenSourceSoftware and FreeLibreOpenSourceSoftware domains, and 
am donating then to the FOSS community.

I have set up a wiki at the domains to provide a home for FOSS, as separate 
from Commercial Open Source Software (COSS) with some published code but 
closed elements for advanced functionality that potentially leads right 
back to proprietary lock-in.  The link to "FOSS Philosophy" starts with a 
quote from Adam Smith (!), and describes the clear FOSS / COSS separation I 
believe important to help the FOSS brand continue to succeed.

I've seeded the Wiki with starting information, including basic information 
on GNUWin32.  Of course feel free to add.  Please spread the word to let 
others know of the launch.  A link to the site somewhere on the GNUWin32 
site would be great.

    http://freeopensourcesoftware.org/

Cheers,
Bill

-- 

Bill Stewart
Founder, Eseri.net
http://Eseri.net/
p: 613-796-8529

Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=5083046
By: benpollinger

Sorry, belatedly realised that :: is the partial answer

gsar -sDUMMYPATH -r"C::\Program Files\MyApp" -f MyApp.ini

BUT - quotes still don't work: I get error:

command error, no input file name specified

Any further thoughts?

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=74807

Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=5083009
By: benpollinger

Hello all,

I'd like to use gsar in a batch to process a file thus:

gsar -sDUMMYPATH -rC:\Program Files\MyApp -f MyApp.ini

...but gsar says "command error, not a valid decimal number : \Pr"

I tried enclosing the replacement in quotes but to no avail.

Any ideas?

thanks,
Ben

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=74807

Hi, I'm having a serious and very urgent problem with GSL 1.8 on
Visual C ++ 2003.

I'm trying to use Levenberg Marquadt and I'm obtaining the following
run time error.


Run-Time Check Failure #0 - The value of ESP was not properly saved across a
function call.  This is usually a result of calling a function declared with
one calling convention with a function pointer declared with a different
calling convention.



At first I tought it was a problem with my program but even testing
the sample program found here
http://www.csse.uwa.edu.au/programming/gsl-1.0/gsl-ref_35.html gives
me exactly the same error.
I'm in big troubles, since I have no clues on what to do.
Thanks.


Run-Time Check Failure #0 - The value of ESP was not properly saved across a
function call.  This is usually a result of calling a function declared with
one calling convention with a function pointer declared with a different
calling convention.

Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=5078159
By: mz2ptc0

I had installed compface 1.5.2 and netpbm 10.27. I have installed "libpng13.dll"
version 1.2.8.1799 so I will install the latest version. Thanks for your timely
answer.

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=74807

Project: GnuWin32  (gnuwin32)
Package: libarchive
Date   : 2008-07-06 12:34

Project "GnuWin32" ('gnuwin32') has released the new version of package 'libarchive'.
You can download it from SourceForge.net by following this link:
<https://sourceforge.net/project/showfiles.php?group_id=23617&release_id=611590>
or browse Release Notes and ChangeLog by visiting this link:
<https://sourceforge.net/project/shownotes.php?release_id=611590> 

You receive this email because you requested to be notified when new versions
of this package were released. If you don't wish to be notified in the future,
please login to SourceForge.net and click this link:
<https://sourceforge.net/project/filemodule_unmonitor.php?filemodule_id=148884>
If you lost your SourceForge.net login name or password, refer to this document:
<https://sourceforge.net/docman/display_doc.php?docid=760&group_id=1>

Note that you may receive this message indirectly via one of your mailing list
subscriptions. Please review message headers before reporting unsolicited
mailings.

-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
GnuWin32-Announce mailing list
Gnu...@li...
https://lists.sourceforge.net/lists/listinfo/gnuwin32-announce

Project: GnuWin32  (gnuwin32)
Package: file
Date   : 2008-07-06 12:33

Project "GnuWin32" ('gnuwin32') has released the new version of package 'file'.
You can download it from SourceForge.net by following this link:
<https://sourceforge.net/project/showfiles.php?group_id=23617&release_id=611589>
or browse Release Notes and ChangeLog by visiting this link:
<https://sourceforge.net/project/shownotes.php?release_id=611589> 

You receive this email because you requested to be notified when new versions
of this package were released. If you don't wish to be notified in the future,
please login to SourceForge.net and click this link:
<https://sourceforge.net/project/filemodule_unmonitor.php?filemodule_id=18878>
If you lost your SourceForge.net login name or password, refer to this document:
<https://sourceforge.net/docman/display_doc.php?docid=760&group_id=1>

Note that you may receive this message indirectly via one of your mailing list
subscriptions. Please review message headers before reporting unsolicited
mailings.

-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
GnuWin32-Announce mailing list
Gnu...@li...
https://lists.sourceforge.net/lists/listinfo/gnuwin32-announce

Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=5076822
By: gnuwin32

The latest version of libpng, 1.2.24 (2 Jan 2008), has version 1.2.3 of zlib1.dll.
Which version of libpng did you install.


______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=74807

Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=5076556
By: mz2ptc0

My installation of libpng came with "zlib1.dll" version 1.2.2.1828. I have downloaded
version 1.2.3 from www.zlib.org and installed it in %windir%\System32 which
is the first directory in my PATH global environment variable. I renamed the
version in GnuWin32\bin to "zlib1.dll.bak". Everything is working but I am wondering
why libpng did not come with the latest version, or should I download a newer
version of the package?

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=74807