ClassXIIthChemistryElectrochemistry1

Class IXth

13
Is Matter Around Us Pure
Lecture - I
Pre requisites
Basic knowledge of pure and impure substances. Knowledge of mixture and solutions ___________________________________________ Slide 1 What is a pure substance? A pure substance means that it is a single substance. A pure substance consists of a single type of particles. A pure substance represents a single substance. __________________________________________ Slide 2 How to test for a pure substance? The purity of a substance can be tested by checking its melting point. A pure substance has a fixed melting point or boiling point at constant pressure. The melting and boiling point of a substance will change if it contains even a tiny amount of another substance. Mixtures: Most of the materials that we come across in our daily life are mixtures. A mixture contains more than one substances, elements or compounds. A mixture may be solid, liquid or gas. Mixture is made up of two or more substances. The substances which make a mixture are called constituents or components. ___________________________________________ Slide 4 For example, lemonade (nimbu pani) is a mixture of water, lemon juice, sugar and salt. When we drink it, we get the sour taste of lemon, salty taste of salt and sweet taste of suger. Moreover, since it containts water also, it quenches our thirst like water. A mixture can be separated by physical methods into its two or more pure substances. For example, Sodium chloride dissolved in water can be separated from water by the physical process of evaporation. Slide 3

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

26

Slide 5

Is Matter Around Us Pure

Slide 8

Chemistry (IX)

Types of Mixtures
Mixtures are of two types: Homogeneous mixtures and Heterogeneous mixtures ___________________________________________ Slide 6 Homogeneous Mixtures: Homogeneous mixtures have the same composition throughout the sample. It has no visible boundaries of separation between various constituents. For example, salt solution (sodium chloride dissolved in water), sugar solution (sugar dissolved in water). ___________________________________________ Slide 7 Heterogeneous Mixtures: Heterogeneous mixtures consist of two or more parts (called phases) which have different compositions. It has visible boundaries of separation between the various constituents. For example, undissolved sugar (solid phase) in sugar solution (liquid phase).

Solutions, suspension and colloid

What is a solution? The lemonade, sharbat, coke, pepsi, etc. are all examples of solution. The substances making up the solution are called components of the solution. Solution is generally made up of two components:(i) solute (ii) solvent ___________________________________________ Slide 9 Solvent:- A component which is present in large amount is called solvent. Solute:- The component which is present in lesser amount is called solute. Thus, a solute is a substance which dissolves and the solvent is a substance in which dissolution takes place. For example, if a crystal of suger is dropped into a beaker of water, it dissolves to from a solution. In this case, sugar is solute and water is solvent. ___________________________________________ Slide 10 Sugar + Water Solution of sugar in water (Solute) (Solvent) These solution are also called true solutions because the particles of solutions have very small size (less then 10-9 m or 1nm or 10-7 cm). For example, sugar dissolved in water to prepare sharbat. However, the solutes may be even liquids or gases. All these are called liquid solutions.

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

27

Slide 11

Is Matter Around Us Pure

Slide 14 Metal Alloys:

Chemistry (IX)

Mixture of miscible liquids (alcohol in water) is a common example of liquid in liquid solutions. CO2 dissolved in water in a common example of gas in liquid solutions. In addition to liquid solutions we can have examples of solution in which solid or gas acts as solvent. ___________________________________________ Slide 12 (i) Vinegar which is used as preservative and is also added in Chinese foods is an example of liquid in liquid solution. It has acetic acid dissolved in water. ___________________________________________ Slide 13 (ii) Air is mixture of gas in gas solution. It is a homogeneous mixture of mainly two components: oxygen (20%) and nitrogen (78%). The other gases are present in very small quantities. This is an example of gaseous solution. (iii) Mixtures of silver and gold and copper and gold are common examples of solid in solid solution. An important alloy, brass containing approximately 70% copper and approximately 30% zinc contains zinc as solute and copper as solvent.

Alloys are homogeneous mixture of two or more metals. These cannot be separated into their components by physical methods. However, these are considered as mixture because these show the properties of its constituents and can have variable composition. For example:___________________________________________ Slide 15 Brass is a mixture of copper and zinc. Stainless steel which we use for utensils is a mixture of iron, chromium and nickel. Bronze is a mixture of copper and tin and it is also commonly used for making utensils, statues, etc. ___________________________________________ Slide 16

Aqueous And Non-Aqueous Solutions

Aqueous Solution:1. The solutions obtained by dissolving various substances in water are called aqueous solutions. The common examples of aqueous solutions are: (i) Common salt dissolved in water (ii) Sugar dissolved in water (iii) Acetic acid dissolved in water (called vinegar). etc.

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

28

Slide 17 Non-Aqueous Solution:-

Is Matter Around Us Pure

Chemistry (IX)

2. The solutions obtained by dissolving a substance in liquids other than water are called non-aqueous solutions. The common non-aqueous solvents are alcohol, carbon disulphide, carbon tetrachloride, acetone, benzene, etc. Examples of non-aqueous solutions are: (i) Iodine dissolved in carbon tetrachloride (ii) Sulphur dissolved in carbon disulphide (iii) Bromine dissolved in chloroform (iv) Sugar dissolved in alcohol, etc. ___________________________________________ Slide 18 Properties of Solutions:The important properties of solution are: 1. A solution is homogeneous in nature. It may be noted that in a solution, there is homogeneity at micro level. 2. The size of the particles of solution is less then 10-9 m (called 1 nm). They cannot be seen with naked eye. 3. The particles of the solution cannot be seen even with the help of a microscope. ___________________________________________ Slide 19 1. The particles of the solution easily pass through a filter paper. Therefore, they cannot be separated by the process of filtration. 2. The solute particles in solution do not settle on keeping, i.e. a solution is stable.

3. Because of very small size, they donot scatter a beam of light passing through the solution. So the path of light is not visible in a solution. ___________________________________________ Slide 20 Advantage of Preparing a Solution We know that in a solution, solute and solvent are present in the from of molecules or ions. When two reacting solid substances come in contact, the reaction is very slow and sometimes not even visible. When their solutions are mixed, the reactions take place very fast. This is because of close mixing of two reacting substances at molecular level. ___________________________________________ Slide 21 Concentration of a solution Concentration of a solution is the amount of solute present in a given amount (mass or volume) of solution.
Concentration = Amount of solute Amount of solution

___________________________________________ Slide 22 There are two common ways:1. Mass percentage:- The simplest way of expressing concentration of solution is mass percentage of solution. It gives mass of solute per 100 mass unit of solution. This may be expressed as :
% Solute = Mass of solute Mass of solution 100

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

29

Slide 23

Is Matter Around Us Pure

Slide 26 Solubility

Chemistry (IX)

A 10% of solution of glucose (C6H12O6) means that 10g of glucose is dissolved in 100 g of solution. In other wards, this means that 10 g of glucose is added to 90 g of water. Similarly, if 25g of sucrose is dissolved in 200g of solution, then
% Solute = 25 100 = 12.5% 200

___________________________________________ Slide 24
2. Volume Percentage:-

The amount of solute required to prepare a saturated solution in a given quantity of solvent at a given temperature is called the solubility of the solute. It is generally expressed for 100 g of the solvent. The amount of solute which can be dissolved in 100 g of solvent at a given temperature is called its solubility. ___________________________________________ Slide 27 What is a suspension? It is a heterogeneous mixture which contains small insoluble particles of solute spread throughout the solvent without dissolving it. For example, muddy water, chalk water, paints, smoke in the air are suspensions. ___________________________________________ Slide 28 Properties of Suspensions The main properties of suspensions are: 1. Suspension is a heterogeneous mixture. 2. The particles of suspensions are bigger then 107m or 100 nm (10-5 cm) in diameter. 3. The particles of suspension may or may not be visible by naked eye. But they are visible under microscope.

Concentration of solute in Volume present Volume of solute = 100 Volume of solution A 20% of alcohol means that 20 ml of alcohol are present in 100 ml of solution. In other words, 20 ml of alcohol are added to 80 ml of water. ___________________________________________ Slide 25 Saturated and Unsaturated Solutions Saturated solution:- A solution in which no more solute can be dissolved at a given temperature is called saturated solution. Unsaturated solution:- A solution in which the amount of solute is less than the saturation level is called unsaturated solution.

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

30

Slide 29

Is Matter Around Us Pure

Dispersion Medium:-

Chemistry (IX)

4. The particles of suspension scatter a beam of light passing through it and make its path visible. 5. The particles of suspension settle down when left undisturbed. Therefore, a suspension is unstable. 6. The suspension can be separated from the mixture by the process of filtration. ___________________________________________ Slide 30 What is colloidal solution? A Solution in which the size of the solute particles is intermediate between those in true solutions and suspensions. The common examples of colloidal solutions are milk, gum solution, blood, milk cream, ink, soap solution, etc. The size of the particles is between 10-7m and 10-9 m (100 nm and 1 nm). ___________________________________________ Slide 31 But actually a colloidal solution is a heterogeneous mixture. It consists of two phases:(i) Dispersed phase and (ii) Dispersion medium

It is the component which is present in excess and acts as a medium in which colloidal particles are dispersed. ___________________________________________ Slide 33 Brownian movement of colloids

Brownian movement of colloidal particles ___________________________________________ Slide 34 The colloidal particles are moving at random in a zigzag motion in all directions. This type of zig-zag motion of colloidal particles is called Brownian movement. The Brownian movement is caused by the collision of the colloidal particles with the molecules of the dispersion medium. ___________________________________________ Slide 35 Tyndall Effect of Colloids The sizes of colloidal particles are too small to be seen by naked eye. However, they exhibit a property known as Tyndall effect.

___________________________________________ Slide 32 Dispersed Phase: It is the component which is present in small proportion and consists of particles of colloidal dimensions (10-9 m to 10-7 m).

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

31

Is Matter Around Us Pure

When a strong beam of light is passed through a true solution in a beaker, in dark room, the path of the light does not become visible. However, if the same beam of light is passed through the colloidal solution, placed in the room, the path of the light becomes visible when seen from a direction at right angle to that of the incident beam. ___________________________________________ Slide 36 This effect can also be observed when a fine beam of light falls in a room through a small hole in the window. The phenomenon of scattering of light by colloidal particles as a result of which the path of the beam becomes visible is called Tyndall effect. ___________________________________________ Slide 37 Tandall effect can also be observed when sunlight passes a dense forest. In the forest, fog contains tiny droplets of water which act as particles of colloid dispersed in air. Slide 38 Properties of Colloids

Chemistry (IX)

1. Colloid is a heterogeneous mixture. It consists of dispersed phase and dispersion medium. 2. The size of particles of a colloid is in between 1 nm (10-9m or 10-7 cm) and 100 nm (10-7 m or 10-5 cm). 3. The particles of colloids are too small to be seen by naked eyes. ___________________________________________ Slide 39 4. The particles of colloid are large enough to scatter a beam of light passing through it and make its path visible. Thus, they show Tyndall effect. 5. A colloid is quite stable. Its particles do not settle down when left undisturbed. 6. The particles of colloidal solution cannot be separated from mixture by the process of filtration. However, they can be separated by a special technique known as centrifugation.

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

32

Is Matter Around Us Pure Lecture Assignment

Chemistry (IX)

1 Mark Questions
Q1. Q2. Q3. What is meant by pure substance? What is meant by mass percentage of solution? What is meant by dispersed phase?

3 Mark Questions
Q7. How are sol, solution and suspension different from each other? Q8. A solution contains 40 ml of ethanol mixed with 100 ml of water. Calculate the concentration in terms of volume by volume percentage of the solution. Q9. Calculate the masses of sugar and water required to prepare 250 g of 25% solution of cane sugar by mass. Q10. What is a solution? What are the advantages of preparing a solution?

2 Mark Questions
Q4. Explain the following giving examples: (a) Colloid (b) Suspension Which of the following materials fall in the category of a pure substance? (a) Ice (b) Milk (c) Iron (d) Hydrochloric acid (e) Calcium oxide (f) Mercury (g) Brick (h) Wood. What is meant by Tyndall effect? What is its cause? Illustrate with example.

Q5.

Q6.

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

33

Is Matter Around Us Pure Lecture II

Pre requisites
Basic knowledge of element, compounds, mixtures Basic idea of separation techniques. ___________________________________________ Slide 40 Separating the components of a mixture evaporation Process of separating any substance from its solution by removing water is called evaporation. ___________________________________________ Slide 41 Centrifugation: This is a method for separating the particles suspended in a liquid. Sometimes, the solid particles in a liquid are too small and readily pass through a filter paper. These solid particles can be separated with the help of a machine known as centrifugal machine. ___________________________________________ Slide 42 The machine can be rotated at a very high speed. The principle of this process is that the denser particles are forced to the bottom and the lighter particles stay at the top when spun rapidly. So in the suspension of particles suspended in a liquid, the heavier particles settle down at the bottom of test tubes. (i) The test tubes are rotated at a very high speed. (ii) One material is heavier than the other. Slide 43 Applications of Centrifungation

Chemistry (IX)

1. The process of centrifugation is used in dairies and homes to separate butter from cream. 2. It is used in washing machines to squeeze out water from wet clothes. 3. It is extremely used in diagnostic laboratories for different tests of bloods and urine. 4. It is used in chemical laboratories and industries for separating suspended materials from liquids. ___________________________________________ Slide 44

How to separate a mixture of two immiscible liquids?

The immiscible liquids can be separated by a separating funnel. ___________________________________________ Slide 45

How to separate a mixture of common salt and ammonium chloride?

To separate the mixture which contain a sublimable volatile component from a non sublimable impurity, the process of sublimation is used.

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

34

Slide 46

Is Matter Around Us Pure

Slide 49

Chemistry (IX)

How to separate a mixture of two miscible liquids? Two miscible liquids can be separated by a process known as distillation. Distillation = Evaporation + condensation

Physical and chemical changes

Physical change: It is only a change in the from of matter but the chemical identity (or chemical composition) of the substance does not change. It is a temporary change and can be reversed by changing the conditions. ___________________________________________ Slide 50 Transformation of states is a physical change because these changes occur without a change in composition and do not change the chemical nature of the substance. Although ice, water and water vapour appear to be different and show different physical properties, yet they are chemically same. ___________________________________________ Slide 51 The common examples of physical changes are:(i) Conversion of water into steam or ice are physical changes. (ii) Dissolution of sugar in water is also a physical change. In solution sugar and water retain their identity. Water can be evaporated from the sugar solution and sugar can be recovered.

___________________________________________ Slide 47

How to get pure sugar from impure sample?

Crystallization It may be defined as a process which separates a pure solid in the from of its crystals from a solution. The crystallization technique is better then simple evaporation technique because of the following reasons:(i) Some solids decompose or some solids like sugar may get charred on heating to dryness. (ii) Some impurities may remain in the solution even on filtration. So the solid may not be very pure. ___________________________________________ Slide 48

Chromatography:

It may be defined as the technique of separating the constituent of a mixture by the differential movement of individual components through the stationary phase under the influence of mobile phase.

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

35

Slide 52 Chemical Change:

Is Matter Around Us Pure

Slide 55 Elements:

Chemistry (IX)

It is a change in which chemical identity (or chemical composition) of the substance change. In chemical change one or more kinds of matter are transformed into a new kind of matter or several kinds of matter. It is a permanent change. A chemical change is also called a chemical reaction. For example:___________________________________________ Slide 53 When iron is exposed to oxygen (present in air and water), it rusts. Rusting is due to the formation of a new substance, iron oxide (rust). When magnesium ribbon is burnt in oxygen, it forms magnesium oxide. Burning of candle to give carbon dioxide and water is also chemical change. ___________________________________________ Slide 54 What are the types of Pure Substances On the basis of their chemical composition, the substance can be classified as (i) Elements (ii) Compounds

Robert Boyle was the first scientist to use the term element in 1661. Antoine Laurent Lavoisier, a French chemist was the first to establish an experimentally useful definition of an element. According to him an element may be defined as: A substance which can neither be broken down into simpler substances nor formed from two of more simple substances by any known physical or chemical process. ___________________________________________ Slide 56 The elements are regarded as the building blocks of the universe. Among all the known elements, only mercury (Hg) and bromine (br) are liquids at room temperatures. Elements may be simply divided as metals and non-metals depending upon their properties. Metals usually show the following properties:___________________________________________ Slide 57 1. Most of the metals are sonorous, i.e. they make a ringing sound when hit with an object. The common examples of metals are sodium, potassium, zinc, copper, silver, gold, aluminium, iron, etc. 2. They conduct heat and electricity 3. They are ductile 4. They are malleable

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

36

Slide 58 Non-metals properties:usually show

Is Matter Around Us Pure

Chemistry (IX)

the

following

1. They have low densities. About 80% of the elements are metals and the remaining 20% are non-metals. All the metals are solids except mercury which is a liquid. As we have learnt above, bromine is also liquid at room temperature but it is non-metal. 2. They are poor conductors of heat and electricity. 3. They are non lusturous, non-sonorous and are not malleable ___________________________________________ Slide 59 Compounds: A compound is a pure substance made up of two or more elements chemically combined with one another in a fixed proportion by mass.
Hydrogen + 2H2 + Oxygen O2
Compound

3. The constituent elements of a compound cannot be separated by mechanical or physical methods. We can say that the constituent elements of a compound cannot be separated by physical methods. ___________________________________________ Slide 61 4. A compound is a homogeneous substance. 5. A compound has a fixed melting point and boiling point. 6. The formation of a compound occurs because of a chemical reaction and is accompanied by energy changes. 7. Since compounds are formed by the chemical combination of elements, they are also called chemical compounds. ___________________________________________

Water

2H2 O
H : O 2 : 16 1 : 8

___________________________________________ Slide 60 Properties of Compounds 1. A chemical compound consists of two or more elements combined together in a fixed proportion by mass. 2. The properties of a compound are entirely different from those of its constituent elements.

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

37

Slide 62(A)

Is Matter Around Us Pure

Slide 62(B)

Chemistry (IX)

Let us sum up comparative characteristic differences between mixtures and compounds. Mixtures Compounds 1. In a mixture, the 1. The elements combine or react to form elements or compounds. compounds just mix together. 2. The components of a 2. The compounds contain two or more elements in mixture may be a fixed ratio by mass. present in any ratio. Its composition is Its composition is always fixed. variable. 3. There is no new 3. A new substance is formed. substance formed. 4. A mixture does not 4. A compound has a definite formula. have a definite formula. 5. A mixture may be 5. A compound is always homogeneous. homogeneous or heterogeneous. 6. No chemical reaction 6. A chemical reaction takes place and takes place and therefore, the formation therefore, the of a compound takes formation of mixture place with absorption or is not accompanied evolution of heat. by any energy changes. ___________________________________________

7. A mixture shows the 7. The properties of a compound are entirely properties of its different from those of its constituents. constituents. 8. A mixture can be 8. A compound cannot be separated into its separated into its constituents by ordinary constituents by physical physical methods. These methods (like filtration, can be separated by evaporation, distillation, chemical or electrosublimation, mechanical chemical reaction. separation, etc.) 9. A mixture does not have fixed melting 9. A compound has a fixed melting point, boiling point, boiling point, etc. point, etc.

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

38

Is Matter Around Us Pure Lecture Assignment

Chemistry (IX)

1 Mark Questions
Q1. Q2. Q3. Name the process of separation of miscible liquids. What are physical changes? Give one example. To what colloidal system does milk belong?

3 Mark Questions
Q7. Classify the following into elements, compounds and mixtures: (a) Sodium (b) Soil (c) Sugar solution (d) Silver (e) Calcium carbonate (f) Tin (g) Silicon (h) Coal (i) Air (j) Soap. (k) Methane (l) Carbon dioxide (m) Blood. Explain why water is a compound and not a mixture? What is crystallization? Give its two applications.

2 Mark Questions Q4. Which separation techniques will you apply for the
separation of the following? (a) Sodium chloride from its solution in water. (b) Ammonium chloride from a mixture containing sodium chloride and ammonium chloride. (c) Small pieces of metal in the engine oil of a car. (d) Benzene from a mixture of benzene and methyl benzene. How would you confirm that a colourless liquid given to you is pure water? Give the differences between elements and compounds.

Q8. Q9.

Q5. Q6.

5 Mark Questions
Q10. How will you separate a mixture containing kerosene and petrol (difference in their boiling point is more than 25 C) which are miscible with each other?

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

39

Is Matter Around Us Pure Chapter Assignment

1 Mark Questions
Q1. Q2. Q3. Q4. Q5. Q6. How doe we test purity of substance? What is meant by homogeneous mixture? What is solute and solvent in brass? What is meant by unsaturated solution? What are chemical changes? Give one example. Why is melting of butter a physical change whereas rusting of almirah is a chemical change? Define a substance. Define element. Define filtration. What is the meaning of 15% solution of NaCl? Which elements does steam contain? Give one example of a solid solution. Name the process used to separate a mixture of salt and ammonium chloride. When we heat iron filings and sulphur till red hot, do we get compound or mixture? Which of the following is a substance according to scientific meaning: air, water, smoke, fog

Chemistry (IX)

Q7. Q8. Q9. Q10. Q11. Q12. Q13. Q14. Q15.

2 Mark Questions
Q16. List two points of differences between homogeneous and heterogeneous mixtures. Q17. Which of the following will show Tyndall effect? (a) Salt solution (b) Sea water (c) Air (d) Coal (e) Soda water

Q18. Classify the following as physical or chemical changes: (a) Cutting of trees. (b) Melting of butter in a pan (c) Boiling of water to form steam. (d) Passing of electric current, through water and the water breaking down into hydrogen and oxygen gases. (e) Dissolving common salt in water. (f) Making fruit salad with raw fruits. (g) Burning of paper, wood etc. Q19. A solution contains 5 g of glucose in 45 g of water. Calculate mass by volume percentage of solution. Q20. Give two differences between true solution and colloidal solution. Q21. Give four differences between compounds and mixtures. Q22. Give one example of each of the following: (a) Aerosol (b) Solution. Q23. (a) Name two elements which become liquid at a temperature slightly above room temperature. (b) Give two examples of metalloids. Q24. Why is oxygen considered an element? Q25. Air contains specified proportions of oxygen (21%) and nitrogen (78%). Still it is considered to be a mixture. Explain why? Q26. What are the advantages of crystallisation over simple evaporation? Q27. What is chromatography? Give its applications.

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

40

Is Matter Around Us Pure

Q28. Give some applications of centrifugation Q29. Define solubility. What would happen if saturated solution of a substance at a certain temperature is cooled slowly? Q30. Explain what do you understand by saturated solution and unsaturated solution? Q31. A solution contains 32 g of glucose in 380 g of water. Calculate the concentration of solution as percentage by mass. Q32. What are the properties of suspensions? Q33. What are the properties of colloids? Q34. Fog and cloud are both colloidal in nature. How do they differ? Q35. What do you observe when sunlight passes through a dense forest? Q36. Name the dispersed phase and the dispersion medium in following colloids: Fog, soap foam, Amul cheese, Ponds, cold cream

Chemistry (IX)

Q38. Which of the following is chemical change? (a) Growth of a plant (b) Rusting of iron (c) Mixing of iron fillings and sand (d) Cooking of food (e) Digestion of food (f) Freezing of water (g) Burning of a candle. Q39. To make a saturated solution, 36 g of sodium chloride is dissolved in 100 g of water at 293 K. Find its concentration at this temperature. Q40. How can we obtain pure copper sulphate from an impure sample Q41. Define solution. Give some properties of a solution

5 Mark Questions
Q42. How are sol, solution and suspension different from each other?

3 Mark Questions
Q37. Which separation techniques will you apply for the separation of the following? (a) The different pigments from an extract of flower petals. (b) Butter from curd (c) Oil from water (d) Tea leaves from tea (e) Iron pins from sand (f) Wheat grains from husk (g) Fine mud particles floating in water

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes:

41

Is Matter Around Us Pure Objective Questions

Q1. Which of the following is not a compound? (a) Common salt (b) Water (c) Iron filings (d) Copper sulphate. Which of the following pairs does not contain both elements? (a) Carbon, silicon (b) Helium, nitrogen (c) Bronze, zinc (d) Copper, silver. Which of the following is not a mixture? (a) Soil (b) Air (c) Steam (d) Milk Which of the following is not a physical change? (a) Freezing of water (b) Mixing of iron fillings and sulphur (c) Cooking of food (d) Oxidation of alcohol Which of the following is not a chemical change? (a) Electrolysis of water (b) Boiling of water (c) Digestion of food (d) Burning of magnesium ribbon in oxygen to form magnesium oxide. Q6.

Chemistry (IX)

Q2.

Q3.

Q4.

Q5.

The size of colloidal solution is in the range of (a) 1 100 nm (b) 100 1000 nm (c) 105 m 107 m (d) 107 109 m Q7. Brass contains (a) Gold and copper (b) Copper and zinc (c) Zinc and silver (d) Copper and silver Q8. Which of the following is not a pure substance? (a) Mercury (b) Sugar (c) Blood (d) Salt Q9. Gases can be obtained from air by the process of (a) Fractional distillation (b) Condensation (c) Crystallisation (d) Evaporation Q10. Which method cannot be used for separating solution of solid in liquid? (a) Distillation (b) Separating funnel (c) Crystallisation (d) evaporation

SAVANT EDUCATION GROUP E-17, East of Kailash, New Delhi 110065. Ph.: +91-11-26224417 www.savantgroup.org

Notes: