Scribd
Upload
70 views4 pages

Gate Area and Bus Bar

This document contains a list of road marking and furniture items with their descriptions, units of measurement, quantities, rates, and amounts. It includes items like pavement marking with thermoplastic paint, providing precast kerb, kerb painting, paver blocks, granular sub-base, filling in medians, road studs, and road delineators. The total amount is not provided. The document appears to be an estimate or quotation for road marking and furniture works.

Uploaded by

pandyatushar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
70 views4 pages

Gate Area and Bus Bar

This document contains a list of road marking and furniture items with their descriptions, units of measurement, quantities, rates, and amounts. It includes items like pavement marking with thermoplastic paint, providing precast kerb, kerb painting, paver blocks, granular sub-base, filling in medians, road studs, and road delineators. The total amount is not provided. The document appears to be an estimate or quotation for road marking and furniture works.

Uploaded by

pandyatushar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd

Sr. No.

Item Description

Unit

1.0

ROAD MARKINGS & FURNITURES

1.1

(a) Pavement marking with hot applied Thermoplastic paint


conforming to ASTM D36/BS-3262 (Part - I) as per drawing
and Technical Specification Clause 803 for Lane /center
line/edge line/ transverse marking and any other markings.

Sqm

1.2

Providing Precast M 20 grade Kerb including admixtures, if


required, as per drawing & as per Technical Specification
Clause 408. (Cement & Fly Ash will be provided by the Buyer
to the Vendor as free issue material at Buyer's store).

Cum

1.3

Kerb painting with one coat of primer and 2 coats of


approved make enamel paint of yellow and black color of 500
mm long alternative strip as per IS :133-1975, Morth
technical specification section 800 & IRC -35.

Sqm

1.4

Providing & Fixing of 60 mm thick Minimum M 30 grade paver


block on 30 mm sand bed compacted with vibratory plate
compactors as per IRC:SP:63-2004 including materials,
labours, tools, tackles and plants complete as per
specifications and as directed by Engineer-In-Charge.

Sqm

1.5

Providing, laying and compacting Granular Sub-base (GSB) at


OMC below pavement including Drainage Layer in road and
shoulder complete as per Technical Specifications Clause 401
(Grading I table 400-2)

Cum

1.6

Filling in median / island with approved material with all leads


and lifts complete as per Technical Specification Clause 407

Cum

1.7

Supply and fixing of Road studs (Reflective Pavement


Marker / Cat eye ) of size 110 x 110 x 25 mm weighing at
least 400 gms made out of Alloy and consisting of Methacryl
Resin reflector in Yellow and White colour supported on a
Shank of 50 mm dia with all leads arid lifts, cost and
conveyance of all materials, equipment, loading, unloading,
etc. necessary for successful erection as directed by
Engineer-in-charge of work.

Nos

01/20/2015

1.8

Supply and fixing of Road Delineators with wire mesh cage


with refelector of red color from road top or from kerb top
edge as directed by engineer incharge.

Nos

(a) 100 cm high


TOTAL

01/20/2015

Quantity

Rate
(in Rs.)

300

Amount
(Rs.)

259

145

01/20/2015

26

01/20/2015

You might also like