Scribd
Upload
38 views1 page

Rosemount 3051 Wireless Transmitter Manual

This document provides guidelines for installing and connecting to a Rosemount 3051 wireless pressure transmitter. It recommends considering best practices for network design when mounting the device to achieve optimal wireless performance. The power module must be installed for the field communicator to interface with the transmitter, and connections are located on the power module. Proper installation location and handling of electronics covers is also outlined.

Uploaded by

TanuTiganu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views1 page

Rosemount 3051 Wireless Transmitter Manual

This document provides guidelines for installing and connecting to a Rosemount 3051 wireless pressure transmitter. It recommends considering best practices for network design when mounting the device to achieve optimal wireless performance. The power module must be installed for the field communicator to interface with the transmitter, and connections are located on the power module. Proper installation location and handling of electronics covers is also outlined.

Uploaded by

TanuTiganu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Section 1: Introduction

Reference Manual
00809-0100-4100, Rev AA

March 2013

Network design best practices


When mounting the device, recommended practices should be considered to achieve the best
wireless performance. See Appendix D: Network design best practices for more information on
recommended practices.

Field communicator connections


The Power Module needs to be installed in the device for the Field Communicator to interface
with the Rosemount 3051. The Field Communicator connections are located on the Power
Module. To communicate to the transmitter, connect the Field Communicator to the COMM
port connections on the Power Module. This transmitter uses the Green Power Module; please
order model number 701PGNKF. Field communication with this device requires a HART-based
Field Communicator using the correct Rosemount 3051 Wireless DD. The Power Module is
keyed and can only be inserted in one orientation. Refer to Figure 1-4 for instructions on
connecting the Field Communicator to the 3051.
Figure 1-4. Field Communicator Connections

1.5.2

Mechanical
Location
When choosing an installation location and position, take into account access to the power
module compartment for easy power module replacement

Electronics cover
The electronics cover is tightened so that polymer contacts polymer. When removing the
electronics cover, ensure that there is no damage done to the o-ring. If damaged replace before
reattaching cover, ensuring polymer contacts polymer (i.e. no o-ring visible).

1.5.3

Electrical
Power module
The Rosemount 3051 Wireless Pressure Transmitter is self-powered. The Power Module
contains a primary lithium-thionyl chloride battery (Green Power Module, model number

Introduction

You might also like