Scribd
Upload
149 views2 pages

Amme

This document outlines the syllabus for the course "Analysis of Mechanisms and Machine Elements". The course covers topics such as velocity and acceleration analysis of mechanisms, static and dynamic force analysis, stresses and materials, riveted and welded joints, pressure vessels, shaft design, and recommended textbooks. Key areas of study include kinematics of linkages, kinetics of slider crank mechanisms, stress-strain behavior, failure theories, and the design of machine components like shafts and pressure vessels. Evaluation is based on modules with varying weightages covering these fundamental mechanical analysis and design principles.

Uploaded by

api-296698256
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
149 views2 pages

Amme

This document outlines the syllabus for the course "Analysis of Mechanisms and Machine Elements". The course covers topics such as velocity and acceleration analysis of mechanisms, static and dynamic force analysis, stresses and materials, riveted and welded joints, pressure vessels, shaft design, and recommended textbooks. Key areas of study include kinematics of linkages, kinetics of slider crank mechanisms, stress-strain behavior, failure theories, and the design of machine components like shafts and pressure vessels. Evaluation is based on modules with varying weightages covering these fundamental mechanical analysis and design principles.

Uploaded by

api-296698256
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Analysis of Mechanisms and Machine Elements (2130103)

Analysis of Mechanisms
And Machine Elements (2130103) - Syllabus
Topics

Module
Weightage

Introduction to mechanism & machine:


Link, kinematic pair, degrees of freedom, classification of kinematic pairs,
inversions of four bar chain, slide crank mechanism & double slider crank
mechanism.

08

Velocity and Acceleration analysis:


Velocity analysis: Absolute & relative motion, vectors, motion of a link,
Velocity analysis of four-link mechanism & slider crank mechanism,
angular velocity of links, velocity of rubbing, I- centre method, Kennedys
theorem, and centrode.
Acceleration analysis: Acceleration, Acceleration analysis of four-link
mechanism & slider crank mechanism,

20

Force Analysis:
Static force analysis: Introduction to static force analysis, superposition,
principle of virtual work, Dynamic force analysis: DAlemberts principle,
dynamic analysis of slider crank chain, velocity & acceleration of piston,
engine force analysis, inertia of connecting rod.

17

Introduction to Simple Stresses:


Definition, classification, general procedure, physical & mechanical
properties of materials, stress strain diagram, Tensile stress & strain,
compressive stress & strain, shear stress & strain, crushing & bearing
stress, factor of safety, linear & lateral strain, Poissions ratio, volumetric
strain, impact stress.

08

Riveted and Welded joints:


Riveted joints:
Methods of riveting, types of rivet heads, types of riveted joints,
terminology, and strength of a riveted joint, efficiency of a riveted joint,
riveted joints for structural use.

[Link]

17

Analysis of Mechanisms and Machine Elements (2130103)

Pressure vessels:
Classification, stresses in thin shell cylinders due to internal pressure,
Hoop stress, longitudinal stress, change in dimension, thick cylindrical
shell subjected to internal pressure.

10

Shafts :
Types of shafts, material of shafts, ASME codes for shaft design, stresses
in shaft, design of shafts subjected to twisting moment only, design of
shafts subjected to bending moment only, design of shafts subjected to
combined twisting & bending, design of shafts subjected to axial load in
addition to combined twisting & bending. Combined twisting & bending,
design of shaft on the basis of rigidity.

20

Books:
Title
Theory of Machines
Theory of Machines
Machine Design
Design of Machine Elements
Machine Drawing

[Link]

Author
S. S. Rattan
R. S. Khurmi
P.C Sharma and D. K.
Aggarwal
V. B. Bhandari
P.S. Gill

Publisher
Tata McGraw Hill
S. Chand
S. K. Kataria & Sons
Tata McGraw Hill
S. K. Kataria & Sons

You might also like