12V DC Intrinsically Safe Power Supply
9491-PS
Isolated power supply Zone 2 mountable DIN-rail or backplane mounting ATEX / IECEx certified FM / CSA approvals (pending)
200mA @10.9V DC - Ex ia IIB output 400mA @11.8V DC - Ex ib IIB output Power over Ethernet option Multiple outputs achieved by ganging 9491-PS modules using 24V DC power distribution backplane
The 9491-PS Power Supply is the preferred method for supplying the 9460-ET series of instrinsically safe Ethernet modules and is based on an isolating power supply. It takes a 24V DC safe area / Zone 2 supply and produces an intrinsically safe, 12V DC nominal output capable of powering the Ethernet modules mounted in a Zone 1 hazardous area. Each 9491-PS can power a single Ethernet module. In order to provide multiple outputs required for several Ethernet modules, the 9491-PS power supply module is ganged up to the required number of ways, either DIN-rail mounted or using the power distribution backplane to simplify the 24VDC input connection to the modules.
The 9491-PS module has LED power indication for both input and output along with internal current limiting and electronic auto-reset circuit breaker action to protect the module in the event of its output being short circuited or overloaded. This also minimises the power dissipation during the fault to a negligible level, thus improving reliability. The output can be from either the Ex ia IIB or Ex ib IIB output connectors depending upon application. The ib IIB output providing a higher useable output power where the Gas Group and Zone allows.
EUROPE (EMEA) Tel: +44 (0)1582 723633 Fax: +44 (0)1582 422283 AMERICAS Tel: +1 603 926 0090 Fax: +1 603 926 1899 ASIA PACIFIC Tel: +65 487 7887 Fax: +65 487 7997 E-mail: enquiry@[Link] Web site: [Link]
Oct 2008
SPECIFICATION
See also System Specification
DIMENSIONS (mm)
Optional TH5000 tag holder for individual module identification. Accepts tag label 25 x 12.5 0.5mm, 0.2mm thick Intrinsically safe connectors 15.8 +/ 0.2 104.8
POWER INPUT Separately powered Input voltage 24V DC (2030V) Input current 350mA Input protection Fuse + supply reversal diode POWER OUTPUT Ex ia IIB output Minimum o/p voltage
12.1 9.7 12.1V minimum
Equivalent circuit
6W maximum
Output current (mA)
400
Ex ib IIB output Minimum o/p voltage
12.1 11.6 Output voltage (V) 12.1V minimum
Equivalent circuit
1.3W maximum
ENVIRONMENTAL Ambient temp Operating 0C to +70C Storage 20C to +70C Relative Humidity 5 to 95% RH (non-condensing) Ingress Protection IP20 to BS EN 60529 (Additional protection by means of enclosure)
Output current (mA)
400
Connectors 9491-PS is supplied with two IS output connectors. (When using crimp ferrules for the IS connectors the metal tube length should be 12mm and the wire trim length 14mm.) ISOLATION Isolation - input to output Um = 253V rms SAFETY Location of module Safe area, Zone 2*, Division 2* Location of field wiring Ex ia output Zone 0, IIB hazardous area or Class 1, Div 1, Groups C, D hazardous location* Ex ib output Zone 1, IIB hazardous area or Class 1, Div 1, Groups C, D hazardous location* Certification Code See approvals Safety description See certificate MECHANICAL Mounting DIN rail or power distribution backplane Dimensions See diagram Weight 130 g
LED INDICATORS
OFF Pwr (green) IS (green) 24V power fail IS power fail Flash N/A ON 24V power OK
121.8
Output voltage (V)
output overload IS power OK or short circuit present
* certification pending
EUROPE (EMEA) Tel: +44 (0)1582 723633 Fax: +44 (0)1582 422283 AMERICAS Tel: +1 603 926 0090 Fax: +1 603 926 1899 ASIA PACIFIC Tel: +65 6 487 7887 Fax: +65 6 487 7997 E-mail: enquiry@[Link] Web site: [Link]
Oct 2008
