Dando Drilling International
waterwell
mounting options
onboard compressor
onboard mud/flush pump
Dando Watertec 24
The Dando Watertec 24 is an incredibly successful water well drilling rig developed specifically for use in demanding environments. The 24000kg pullback gives it a realistic drilling depth of 750m and is favoured by large aid agencies, government departments and contracting companies. Capable of a wide range of drilling techniques including flooded reverse.
Watertec 24 Rotary Drill Rig
Drilling Rig Specification
Carrier Options Deck Engine Mast Dimensions Rig Capacity Rotary Head Performance Drill Table and Break Out System Standard Compressor Main Winch Tool Handling Winch Mud Pump Foam Pump Inline Oil Lubricator Hydraulic System Drillers Control Panel Levelling Jacks Lighting and Electrical System Drilling Capacities* Optional Equipment Heavy duty commercial 6 x 6 truck - Crawler mounted - Trailer mounted Mounted on customer own support vehicle/structure Caterpillar C15 540 HP diesel engine standard, other options available Working mast height Working mast using the using main winch: 9140mm rotary head: 7600mm Pullback: 24000kgs Pulldown: 14000kgs Hook load (max): 24000kgs
Standard Rotation (max) 192rpm Torque (max) 8850Nm Other options available Rotary head tilt and side shift As standard - Box type drill table with removable drill rod and casing guides. Break out system is a double acting hydraulic cylinder with adjustable wrench Ingersoll Rand XHP 900 (900CFM/350psi) Maximum single line pull: 8000kgs Maximum single line pull: 2040kgs Maximum speed: 27m/minute Maximum speed: 40m/minute Other options available Other options available Drum capacity: 83m of 18mm wire rope Drum capacity: 57m of 12mm wire rope
Standard: Hydraulically driven Maximum flow rate: (222gpm) 840 litres/minute 51/2" x 8" duplex mud pump Maximum discharge pressure: 338psi Standard: Hydraulically driven triplex pump Maximum flow rate: 34 litres/minute Maximum discharge pressure: 750psi
Fitted as standard and used when operating a DTH hammer Hydraulic power circuit based on load sensing hydraulic pumps and proportional control valves Uncomplicated and user friendly with ergonomic layout Two front and two rear jacks with individual locking valves Rig is provided with mast and control panel lighting and the electrical system is 24 volt 31/2" (13.5kgs/m) drill rod = 1400m 41/2" (23kgs/m) drill rod = 830m RC Drilling Conversion Kit - For reverse circulation drilling and flooded reverse drilling applications Pipe Handling Boom Crane - For loading and unloading drill pipe and light site work Rod Spin Safety Guard - Optional Other Options available on request
* Based on 80% of drill string weight in dry hole
Please note: All figures and claims made here are indicative and Dando Drilling International reserves the right to make alterations to specification detail without notice. All images are for reference only and may not represent the exact specification outlined in this document.
Dando Drilling International Limited [Link] info@[Link] tel: +44 (0)1903 731312 fax: +44 (0)1903 730305
