LM1458/LM1558
Dual Operational Amplifier
General Description
Features
The LM1458 and the LM1558 are general purpose dual
operational amplifiers. The two amplifiers share a common
bias network and power supply leads. Otherwise, their operation is completely independent.
The LM1458 is identical to the LM1558 except that the
LM1458 has its specifications guaranteed over the temperature range from 0C to +70C instead of 55C to +125C.
n
n
n
n
n
n
No frequency compensation required
Short-circuit protection
Wide common-mode and differential voltage ranges
Low-power consumption
8-lead can and 8-lead mini DIP
No latch up when input common mode range is
exceeded
Connection Diagrams
Metal Can Package
Dual-In-Line Package
00788602
Top View
Order Number LM1558H,
LM1558H/883 or LM1458H
See NS Package Number H08C
2003 National Semiconductor Corporation
DS007886
00788603
Top View
Order Number LM1558J/883, LM1458M,
LM1458MX or LM1458N
See NS Package Number J08A, M08A or N08E
[Link]
LM1458/LM1558 Dual Operational Amplifier
August 2003
LM1458/LM1558
Absolute Maximum Ratings
Storage Temperature Range
(Note 1)
65C to +150C
Lead Temperature (Soldering, 10 sec.)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
260C
Soldering Information
Dual-In-Line Package
(Note 5)
Soldering (10 seconds)
Supply Voltage
260C
Small Outline Package
22V
18V
LM1558
LM1458
Power Dissipation (Note 2)
LM1558H/LM1458H
500 mW
LM1458N
400 mW
Input Voltage (Note 3)
Output Short-Circuit Duration
215C
Infrared (15 seconds)
220C
See AN-450 Surface Mounting Methods and Their Effect
on Product Reliability for other methods of soldering
surface mount devices.
30V
15V
Differential Input Voltage
Vapor Phase (60 seconds)
ESD tolerance (Note 6)
300V
Continuous
Operating Temperature Range
LM1558
LM1458
55C to +125C
0C to +70C
Electrical Characteristics (Note 4)
Parameter
Conditions
LM1558
Min
Typ
LM1458
Max
Min
Typ
Units
Max
Input Offset Voltage
TA = 25C, RS 10 k
1.0
5.0
1.0
6.0
mV
Input Offset Current
TA = 25C
80
200
80
200
nA
200
500
200
500
Input Bias Current
TA = 25C
Input Resistance
TA = 25C
Supply Current Both
TA = 25C, VS = 15V
0.3
1.0
3.0
0.3
5.0
1.0
3.0
nA
M
5.6
mA
Amplifiers
Large Signal Voltage Gain
TA = 25C, VS = 15V
50
160
20
160
V/mV
VOUT = 10V, RL 2 k
Input Offset Voltage
RS 10 k
6.0
7.5
mV
Input Offset Current
500
300
nA
Input Bias Current
1.5
0.8
Large Signal Voltage Gain
VS = 15V, VOUT = 10V
Output Voltage Swing
VS = 15V, RL = 10 k
25
15
A
V/mV
RL k
14
13
Input Voltage Range
12
10
12
14
13
VS = 15V
12
10
12
Common Mode
RS 10 k
70
90
70
90
dB
RS 10 k
77
96
77
96
dB
RL = 2 k
V
V
Rejection Ratio
Supply Voltage
Rejection Ratio
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
functional, but do not guarantee specific performance limits.
Note 2: The maximum junction temperature of the LM1558 is 150C, while that of the LM1458 is 100C. For operating at elevated temperatures, devices in the H08
package must be derated based on a thermal resistance of 150C/W, junction to ambient or 20C/W, junction to case. For the DIP the device must be derated based
on a thermal resistance of 187C/W, junction to ambient.
Note 3: For supply voltages less than 15V, the absolute maximum input voltage is equal to the supply voltage.
Note 4: These specifications apply for VS = 15V and 55C TA 125C, unless otherwise specified. With the LM1458, however, all specifications are limited to
0C TA 70C and VS = 15V.
Note 5: Refer to RETS 1558V for LM1558J and LM1558H military specifications.
Note 6: Human body model, 1.5 k in series with 100 pF.
[Link]
LM1458/LM1558
Schematic Diagram
00788601
Numbers in parentheses are pin numbers for amplifier B.
[Link]
LM1458/LM1558
Physical Dimensions
inches (millimeters)
unless otherwise noted
Metal Can Package (H)
Order Number LM1558H, LM1558H/883 or LM1458H
NS Package Number H08C
Small Outline Package (M)
Order Number LM1458M or LM1458MX
NS Package Number M08A
[Link]
LM1458/LM1558 Dual Operational Amplifier
Physical Dimensions
inches (millimeters) unless otherwise noted (Continued)
Molded Dual-In-Line Package (N)
Order Number LM1458N
NS Package Number N08E
LIFE SUPPORT POLICY
NATIONALS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
National Semiconductor
Americas Customer
Support Center
Email: [Link]@[Link]
Tel: 1-800-272-9959
[Link]
National Semiconductor
Europe Customer Support Center
Fax: +49 (0) 180-530 85 86
Email: [Link]@[Link]
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Franais Tel: +33 (0) 1 41 91 8790
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Asia Pacific Customer
Support Center
Email: [Link]@[Link]
National Semiconductor
Japan Customer Support Center
Fax: 81-3-5639-7507
Email: [Link]@[Link]
Tel: 81-3-5639-7560
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
This datasheet has been download from:
[Link]
Datasheets for electronics components.
