Scribd
Upload
960 views1 page

VDI Vs Bolt On Turret

The document discusses different turret designs for Haas turning centers that improve cycle times. It describes three types of turrets: 1) a bolt-on turret that comes standard and allows tools around the perimeter and in radial slots, 2) an optional VDI turret that accepts standard VDI 40 tools including live tools, and 3) a hybrid turret featured on dual-spindle models that allows both VDI 40 and bolt-on tools in its 12 stations.

Uploaded by

Baris Yazici
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
960 views1 page

VDI Vs Bolt On Turret

The document discusses different turret designs for Haas turning centers that improve cycle times. It describes three types of turrets: 1) a bolt-on turret that comes standard and allows tools around the perimeter and in radial slots, 2) an optional VDI turret that accepts standard VDI 40 tools including live tools, and 3) a hybrid turret featured on dual-spindle models that allows both VDI 40 and bolt-on tools in its 12 stations.

Uploaded by

Baris Yazici
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Special Turret Design

Improve your cycle


times by keeping
the machine in
constant motion.

On-The-Fly Indexing
This standard feature allows tool changes on the
fly, while the axes are in motion retracting from
the part. This feature, combined with high-speed
rapid movements, results in faster tool changes
and shorter cycle times by reducing non-cutting
time to an absolute minimum.

THREE TYPES OF TURRET 1

Haas SL Series turning centers


come standard with a BOLT-ON TOOL
TURRET that provides super-rigid
mounting of turning tools and
boring bars. This turret accepts
tools around the perimeter, and has
an equal number of standard radial
slots on the face for mounting
turning tools in either the right- or
left-hand direction.

The optional HAAS VDI TURRET


accepts standard VDI 40 tools,
including axial and radial live tools
when combined with the versatile
live tooling option.

1 Turret type may affect maximum turning diameter.

Specifications subject to change without notice. Not responsible for typographical errors.

Dual-spindle TL-15 and TL-25


models feature the VB HYBRID
TURRET, a 12-station turret that
allows the use of VDI 40 tools
(including live tools), as well as
standard bolt-on tools. The turret
has 6 VDI stations and 6 bolt-on
stations (both radial slots for turning
tools and perimeter stations for ID
tools). The VB turret is optional on
the SL-20, SL-30 and SL-40.

You might also like