Scribd
Upload
111 views2 pages

Preventive Maintenance Inspection Form

The document is a recommended preventive maintenance inspection form for equipment. It lists maintenance tasks to check at 150 hour, 1200 hour, and 2400 hour intervals. These include greasing points, hydraulic component inspections, filter replacements, and hydraulic oil sampling. Technicians are to initial each checked item, note any required repairs, and sign off after completing the inspection.

Uploaded by

June Alapa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
111 views2 pages

Preventive Maintenance Inspection Form

The document is a recommended preventive maintenance inspection form for equipment. It lists maintenance tasks to check at 150 hour, 1200 hour, and 2400 hour intervals. These include greasing points, hydraulic component inspections, filter replacements, and hydraulic oil sampling. Technicians are to initial each checked item, note any required repairs, and sign off after completing the inspection.

Uploaded by

June Alapa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd

RECOMMENDED MINIMUM

PREVENTIVE MAINTENANCE INSPECTION


FORM

EQUIPMENT NUMBER EQUIPMENT MAKE EQUIPMENT YEAR TIME IN / TIME OUT ODOMETER READING DATE OF SERVICE WORK ORDER #

Type of Inspection

LEGEND: OK -- Ready to Use A - 150 HR B - 1200 HR C - 2400 HR LEGEND: ROH - 1500 Roll Off Hoist
SR -- Service Required ROHT - 1600 Roll Off Hoist Trailer
RN -- Repair / Replace needed PT - 1700 Pup Trailer
REL - R90
CCR - Container Carrier Rotator
FOR COMPLETE DETAILS, REFER TO OWNER'S MANUAL HL - Hook Lift

OK SR RN Init. OK SR RN Init.
150 HR SERVICE (ROH/ROHT/PT/REL/CCR/HL) 2400 HR SERVICE (ROH/ROHT/PT/REL/CCR/HL)
1.- Grease Points Inspection Refer to diagram in Owner's Manuals. 21.- Replace Hydraulic Oil. See Note 4
2.- Cylinders (clear of debris)
3.- Fittings & connections for leaks Note 1: Oil Cleanliness MUST be maintained @ ISO 18/15/13 or better.
4.- Check Hydraulic hoses
5.- Check Hydraulic oil level Note 2: Use Filter Cart if oil samples taken @ 1200 HR & 2400 HR
6.- Check and clean tailgate locking pins (REL) exceeds ISO 18/15/13
7.- Check alarms & speed limiter Note 3: All filtrations must last 6 months @ ISO 18/15/13
8.- Check filters & breather Breather # H4585 (ABF-3/10) If equipped

1200 HR SERVICE (ROH/ROHT/PT/REL/CCR/HL) Note 4: Not required if compliance with "Extended Drain Interval Program"
9.- Replace filters
10.- Check Hydraulic Components Unit req. special service? Yes No
11.- Re-torque tubing & fittings Note: Refer to Owner' Manual Unit released to continue service? Yes No
12.- Inspect Nuts, bolts, shafts & pins
13.- Body Inspection
Refer to owner's manual
( major components) Oil Analysis Testing
14.- Hyd. Oil Cleanliness Sample. Sample to comply to ISO 18 / 15 / 13 or better
See Note 1 Sample Completed @ __________ Miles __________ Hours __________ Date
15.- Replace Return Line Filter
16.- Clean Suction Strainer
REL or if reservoir is equipped with them, filter#
17.- Replace External Line Filter H4159 (SE-10)

18.- Replace External Line Filter CCR only, filter# H4158 (ZAE-03) Comments:
19.- Check Hyd. Pump for any abnormal noise
20.- Check Hyd. System Pressure Settings

Technician's Name (Print) Date

Technician's Signature Date

Preventive Maintenance Inspection - Q1024 12/15/03 Rev. I:/QMS/GHForms/Q1024


Preventive Maintenance Inspection - Q1024 12/15/03 Rev. I:/QMS/GHForms/Q1024

You might also like