ATTACHMENT-5 : Table-A "Basic Load Combinations"

For Anchor Bolt/Base Plate Design &

For Servicebility (Deflection Check)

Load Conditions Basic Load Combinations Reference ASCE-7-05 Load Combinations

Empty/Erection 0.6 DL + WL 0.6D+W+H

0.6 DL + WL (w/o Reserve Loads) 0.6D+W+H
DL+ 0.75 LL +0.75WL D+H+F+0.75(W or 0.7E) +0.75L +0.75 (Lr or S or R)
Operating
DL+WL D+H+F+(W or0.7E)
DL+WL+Reserve Loads D+H+F+(W or0.7E)
DL+0.75(0.5 WL) +0.75 LL D+H+F+0.75(W or 0.7E) +0.75L +0.75 (Lr or S or R)
Test
DL+0.5 WL D+H+F+(W or0.7E)
0.6DL+0.7EQ (w/o Reserve Loads) 0.6D+ 0.7E+H
DL+0.75LL+0.75(0.7EQ) D+H+F+0.75(W or 0.7E) +0.75L +0.75 (Lr or S or R)
Sesmic
DL+0.7EL D+H+F+(W or0.7E)
DL+0.7EL+Reserve Loads D+H+F+(W or0.7E)
Maintanance DL+LL+ML D+H+F+L+T

For Foundation Load Table Table of STAAD Load List

Basic Load Case STAAD Load Combination Numbers CHECK

DL 501 Foundation Load Table
LL 502
Anchor bolt and
Empty 503
Base Plate Design
Operating 504
Test 505 Deflection Check
Reserve Vertical 506 Global: For Column drift

Bundle Pull 507

Local: For Beams
Wind N-S 508
Wind E-W 509 Member Design
Thermal N-S 510 Global: Columns & Vert. bracings
Thermal E-W 511 Local: All other members
Earthquake N-S 512
Earthquake E-W 513 For Connection Design Forces
Global: Columns & Vert. bracings:
Reserve N-S 514
Envelope-1
Global: Columns & Vert. bracings:
Reserve E-W 515
Envelope-2
Local: All other members: Envelope-1
Local: All other members: Envelope-2
 Reference Borouge Clause No.
BGS-CU-002 caluse No 11.3

50% Wind to be considered

50% Wind to be considered

AAD Load List

STAAD Load combination list

501 to 517

605 to 609 801 to 845

601 to 609 801 to 845
601 to 609 701 to 708 801 to 845 901
to 920

301 to 343
301 to 343 401 to 424

601 to 609

801 to 845
601 to 609 701 to 708
801 to 845 901 to 920
 ATTACHMENT-5 : TABLE-B "PRIMARY LOAD CASES"
Load Case
No. Abbreviation Load Title
1001 SW OF STRUCTURE

1002 DEAD LOAD OF SECONDARY BEAMS

1003 DEAD LOAD OF GRATING ON FLOORS

1004 DEAD LOAD OF SECONDARY ITEMS

1005 DEAD LOAD OF FIRE PROOFING
1 DL DEAD LOAD [TOTAL]
2001 LIVE LOAD ON MAIN FLOORS
2002 LIVE LOAD ON SECONDARY PLATFORMS
2 LL LIVE LOAD [TOTAL]
3001 EMPTY WEIGHT OF PIPING (UDL)
3002 EMPTY WEIGHT OF PIPING (CONCENTRATED)
3003 EMPTY WEIGHT OF EQUIPMENT
3 DLempty EMPTY WEIGHT OF PIPING/EQUIPMENT [TOTAL]
4001 OPERATING WEIGHT OF PIPING (UDL)
4002 OPERATING WEIGHT OF PIPING (CONCENTRATED)
4003 OPERATING WEIGHT OF EQUIPMEMNT
4004 CABLE TRAY LOADS
4 DLOP OPERATING WEIGHT OF PIPING/EQUIPMENT [TOTAL]
5001 HYTROTEST WEIGHT OF PIPING (UDL)
5002 HYDROTEST WEIGHT OF PIPING (CONCENTRATED)
5003 HYDROTEST WEIGHT OF EQUIPMEMNT
5004 CABLE TRAY LOADS
5 DLTest HYDROTEST WEIGHT OF PIPING/EQUIPMENT [TOTAL]
6001 WIND LOAD ON STRUCTURE DUE TO SELF OBSTRUCTION IN X-(E-W) DIRECTION
6002 WIND LOAD ON GRATING IN X-(E-W) DIRECTION
6003 WIND LOAD ON PIPING IN X-(E-W) DIRECTION
6004 WIND LOAD ON EQUIPMENT IN X-(E-W) DIRECTION
6005 WIND LOAD ON CABLE TRAY
6 WLX WIND IN X-(E-W) DIRECTION [WLX:E-->W]
7001 WIND LOAD ON STRUCTURE DUE TO SELF OBSTRUCTION IN Z-(N-S) DIRECTION
7002 WIND LOAD ON GRATING IN Z-(N-S) DIRECTION
7003 WIND LOAD ON PIPING IN Z-(N-S) DIRECTION
7004 WIND LOAD ON EQUIPMENT IN Z-(N-S) DIRECTION
7005 WIND LOAD ON CABLE TRAY
7 WLZ WIND LOAD IN Z-(N-S) DIRECTION [WLZ:N-->S]
8001 SEISMIC LOAD ON STRUCTURE & PIPING IN OPER. CONDN X-(E-W) DIRECTION
8002 SEISMIC LOAD ON EQUIPMENT IN OPER. CONDN X-(E-W) DIRECTION
8 EQX SEISMIC LOAD IN X-(E-W) DIRECTION [SLX:E-->W]
9001 SEISMIC LOAD ON STRUCTURE & PIPING IN OPER. CONDN Z-(N-S) DIRECTION
9002 SEISMIC LOAD ON EQUIPMENT IN OPER. CONDN Z-(N-S) DIRECTION
9 EQZ SEISMIC LOAD IN Z-(N-S) DIRECTION [SLZ:N-->S]
10 TLX PIPE THERMAL LOAD IN X-(E-W) DIRECTION (FDN/GLOBAL DESIGN)
11 TLZ PIPE THERMAL LOAD IN Z-(N-S) DIRECTION (FDN/GLOBAL DESIGN)
12 TLminX MINIMUM ANCHOR LOAD FOR BEAM DESIGN (LOCAL DESIGN)
13 TFX PIPE/EQUIPMENT FRICTION LOAD IN X (E-W) DIRECTION (GLOBAL DESIGN)
14 TFZ PIPE/EQUIPMENT FRICTION LOAD IN Z (N-S) DIRECTION (GLOBAL DESIGN)
15 ML MAINTENANCE LOAD( BUNDLE PULL ) (FDN/GLOBAL DESIGN)
16 TLminZ MINIMUM ANCHOR LOAD FOR BEAM DESIGN (LOCAL DESIGN)
1701 VLPR MIN. LOAD ON PIPE RACK [Link] / LOCAL MAINTAINANCE LOAD
1702 VLNSP LOAD OF N-SP-1071 SUPPORTS
17 VLLOCAL TOTAL VERTICAL LOAD (LOCAL DESIGN)
18 PSV PSV LOADS (HORIZONTAL LOADS) (LOCAL DESIGN)
19 WLLX LOCAL WIND LOAD ON PIPING IN X -(E-W) DIRECTION (LOCAL DESIGN)
20 WLLZ LOCAL WIND LOAD ON PIPING IN Z -(N-S) DIRECTION (LOCAL DESIGN)
21 TLX_LOCAL LOCAL PIPING LOAD IN X (E-W) DIRECTION (LOCAL DESIGN)
22 TLZ_LOCAL LOCAL PIPING LOAD IN Z (N-S) DIRECTION (LOCAL DESIGN)
50 Rv RESERVE LOAD- VERTICAL DIRECTION
51 R_HE RESERVE LOAD- HORIZONTAL IN X-(E-W) HE-DIRECTION
52 R_HN RESERVE LOAD- HORIZONTAL IN Z-(N-S) HN-DIRECTION
ATTACHMENT-5 :TABLE-C "LOAD COMBINATIONS FOR ASD" -For Serviceability check and Connection Design forces
Load Sr. Load 1 2 3 4 5 17 6 19 7 20 8 9 10 11 18 12 21 16 22 13 14 15 50 51 52 Remarks
Conditions No. Comb DL LL DLempty DLop Test VL WLX WLPX WLZ WLPz EQX EQZ TLX TLZ PSV TLMinX TLLOCALX TLMinZ TLLOCALZ TfX TfZ ML RV RHE RHN
1 - - - - - - - - - - - - - - - - - - - - - - - - -
2 - - - - - - - - - - - - - - - - - - - - - - - - -

OP.
Not Required
3 - - - - - - - - - - - - - - - - - - - - - - - - -
4 - - - - - - - - - - - - - - - - - - - - - - - - -
OP. + LL 5 601 1.00 1.00 - 1.00 - - - - - - - - 1.00 1.00 - - - - - 1.00 1.00 - 1.00 1.00 1.00
6 602 1.00 1.00 - 1.00 - - - - - - - - -1.00 -1.00 - - - - - -1.00 -1.00 - 1.00 -1.00 -1.00
For Global Design (Env. 1)
7 603 1.00 1.00 - 1.00 - - - - - - - - 1.00 -1.00 - - - - - 1.00 -1.00 - 1.00 1.00 -1.00
8 604 1.00 1.00 - 1.00 - - - - - - - - -1.00 1.00 - - - - - -1.00 1.00 - 1.00 -1.00 1.00
Test

9 - - - - - - - - - . - - - - - - - - - - - - - - - Not Required
Test+

10 For Global Design (Env. 1)

LL

605 1.00 1.00 - - 1.00 - - - - - - - - - - - - - - - - - - - -

11 606 1.00 0.75 - - 1.00 - 0.38 - - - - - - - - - - - - - - - - - -

50%WL
TEST +

12 607 1.00 0.75 - - 1.00 - -0.38 - - - - - - - - - - - - - - - - - -

LL+

For Global Design (Env. 1)

13 608 1.00 0.75 - - 1.00 - - - 0.38 - - - - - - - - - - - - - - - -
14 609 1.00 0.75 - - 1.00 - - - -0.38 - - - - - - - - - - - - - - - -
32 - - - - - - - - - - - - - - - - - - - - - - - - -
33 - - - - - - - - - - - - - - - - - - - - - - - - -
OP.

Not Required
34 - - - - - - - - - - - - - - - - - - - - - - - - -
35 - - - - - - - - - - - - - - - - - - - - - - - - -
36 701 1.00 1.00 - 1.00 - 1.00 - - - - - - 1.00 1.00 - 1.00 1.00 1.00 1.00 1.00 1.00 - 1.00 1.00 1.00
OP. + LL

37 702 1.00 1.00 - 1.00 - 1.00 - - - - - - -1.00 -1.00 - -1.00 -1.00 -1.00 -1.00 -1.00 -1.00 - 1.00 -1.00 -1.00
For Local Design (Env. 1)
38 703 1.00 1.00 - 1.00 - 1.00 - - - - - - 1.00 -1.00 - 1.00 1.00 -1.00 -1.00 1.00 -1.00 - 1.00 1.00 -1.00
39 704 1.00 1.00 - 1.00 - 1.00 - - - - - - -1.00 1.00 - -1.00 -1.00 1.00 1.00 -1.00 1.00 - 1.00 -1.00 1.00
44 705 1.00 0.75 - - 1.00 1.00 0.38 0.38 - - - - - - - - - - - - - - - - -
50%WL
TEST +

45 706 1.00 0.75 - - 1.00 1.00 -0.38 -0.38 - - - - - - - - - - - - - - - - -

LL+

For Local Design (Env. 1)

46 707 1.00 0.75 - - 1.00 1.00 - - 0.38 0.38 - - - - - - - - - - - - - - -
47 708 1.00 0.75 - - 1.00 1.00 - - -0.38 -0.38 - - - - - - - - - - - - - - -
801 1.00 - 1.00 - - 1.00 - - - - - 1.00 1.00 - - - - - - - - 1.00 1.00 1.00
OP+WL

802 1.00 - 1.00 - - - - 1.00 - - - 1.00 1.00 - - - - - - - - 1.00 1.00 1.00

For Global Design (Env. 2)
803 1.00 - 1.00 - - -1.00 - - - - - -1.00 -1.00 - - - - - - - - 1.00 -1.00 -1.00
804 1.00 - 1.00 - - - - -1.00 - - - -1.00 -1.00 - - - - - - - - 1.00 -1.00 -1.00
16 805 1.00 - 1.00 - - 1.00 - - - - - 1.00 1.00 - - - - - - - -
Reserve
Without
OP+WL

17 806 1.00 - 1.00 - - - - 1.00 - - - 1.00 1.00 - - - - - - - -

Load

For Global Design (Env. 2)

18 807 1.00 - 1.00 - - -1.00 - - - - - -1.00 -1.00 - - - - - - - -
19 808 1.00 - 1.00 - - - - -1.00 - - - -1.00 -1.00 - - - - - - - -
16 809 1.00 0.75 - 1.00 - - 0.75 - - - - - 1.00 1.00 - - - - - - - - 1.00 1.00 1.00
OP+WL+L

17 810 1.00 0.75 - 1.00 - - - - 0.75 - - - 1.00 1.00 - - - - - - - - 1.00 1.00 1.00
For Global Design (Env. 2)
L

18 811 1.00 0.75 - 1.00 - - -0.75 - - - - - -1.00 -1.00 - - - - - - - - 1.00 -1.00 -1.00
19 812 1.00 0.75 - 1.00 - - - - -0.75 - - - -1.00 -1.00 - - - - - - - - 1.00 -1.00 -1.00
20 813 0.60 - - 0.60 - - 1.00 - - - - - 0.60 0.60 - - - - - - - - - - -
Reserve
Without
0.6OP +

21 814 0.60 - - 0.60 - - - - 1.00 - - - 0.60 0.60 - - - - - - - - - - -

Load
WL

For Global Design (Env. 2)

22 815 0.60 - - 0.60 - - -1.00 - - - - - -0.60 -0.60 - - - - - - - - - - -
23 816 0.60 - - 0.60 - - - - -1.00 - - - -0.60 -0.60 - - - - - - - - - - -
16
Empty +WL

817 0.60 - 0.60 - - - 1.00 - - - - - - - - - - - - - - - - - -

17 818 0.60 - 0.60 - - - -1.00 - - - - - - - - - - - - - - - - - -
For Global Design (Env. 2)
18 819 0.60 - 0.60 - - - - - 1.00 - - - - - - - - - - - - - - - -
19 820 0.60 - 0.60 - - - - - -1.00 - - - - - - - - - - - - - - - -
20 821 0.6 (*) - - - - - 1.0 (**) - - - - - - - - - - - - - - - - - -
ERECTION

21 822 0.6 (*) - - - - - -1.0(**) - - - - - - - - - - - - - - - - - -

+ WL

For Global Design (Env. 2)

22 823 0.6 (*) - - - - - - - 1.0 (**) - - - - - - - - - - - - - - - -
23 824 0.6 (*) - - - - - - - -1.0(**) - - - - - - - - - - - - - - - -
825 1.00 - - 1.00 - 0.50 - - - - - - - - - - - - - - - - - -
50%WL
TEST +

826 1.00 - - 1.00 - -0.50 - - - - - - - - - - - - - - - - - -

For Global Design (Env. 2)
827 1.00 - - 1.00 - - - 0.50 - - - - - - - - - - - - - - - -
828 1.00 - - 1.00 - - - -0.50 - - - - - - - - - - - - - - - -
829 1.00 - 1.00 - - - - - - 0.70 1.00 1.00 - - - - - - - - 1.00 1.00 1.00
OP+EQ

830 1.00 - 1.00 - - - - - - - 0.70 1.00 1.00 - - - - - - - - 1.00 1.00 1.00

For Global Design (Env. 2)
831 1.00 - 1.00 - - - - - - -0.70 - -1.00 -1.00 - - - - - - - - 1.00 -1.00 -1.00
832 1.00 - 1.00 - - - - - - - -0.70 -1.00 -1.00 - - - - - - - - 1.00 -1.00 -1.00
20 833 1.00 0.75 - 1.00 - - - - - - 0.53 1.00 1.00 - - - - - - - - 1.00 1.00 1.00
OP+LL+EQ

21 834 1.00 0.75 - 1.00 - - - - - - - 0.53 1.00 1.00 - - - - - - - - 1.00 1.00 1.00
For Global Design (Env. 2)
22 835 1.00 0.75 - 1.00 - - - - - - -0.53 - -1.00 -1.00 - - - - - - - - 1.00 -1.00 -1.00
23 836 1.00 0.75 - 1.00 - - - - - - - -0.53 -1.00 -1.00 - - - - - - - - 1.00 -1.00 -1.00
24 837 0.60 - - 0.60 - - - - - - 0.70 0.60 0.60 - - - - - - - - - - -
0.6OP+EQ

Reserve
Without

Loads

25 838 0.60 - - 0.60 - - - - - - - 0.70 0.60 0.60 - - - - - - - - - - -

For Global Design (Env. 2)
26 839 0.60 - - 0.60 - - - - - - -0.70 - -0.60 -0.60 - - - - - - - - - - -
27 840 0.60 - - 0.60 - - - - - - - -0.70 -0.60 -0.60 - - - - - - - - - - -
28 841 1.00 - 1.00 - - - - - - 0.70 1.00 1.00 - - - - - - - - - - -
Reserve
Without
OP+EQ

Loads

29 842 1.00 - 1.00 - - - - - - - 0.70 1.00 1.00 - - - - - - - - - - -

For Global Design (Env. 2)
30 843 1.00 - 1.00 - - - - - - -0.70 - -1.00 -1.00 - - - - - - - - - - -
31 844 1.00 - 1.00 - - - - - - - -0.70 -1.00 -1.00 - - - - - - - - - - -
15 845 1.00 1.00 1.00 - - - - - - - - - - - - - 1.00 - - - For Global Design (Env. 2)
M
L

L
L
+

901 1.00 - 1.00 - 1.00 1.00 1.00 - - - - 1.00 1.00 - 1.00 1.00 1.00 1.00 - - - 1.00 1.00 1.00
+WL

For Local Design (Env. 2)

ATTACHMENT-5 :TABLE-C "LOAD COMBINATIONS FOR ASD" -For Serviceability check and Connection Design forces
Load Sr. Load 1 2 3 4 5 17 6 19 7 20 8 9 10 11 18 12 21 16 22 13 14 15 50 51 52 Remarks
Conditions No. Comb DL LL DLempty DLop Test VL WLX WLPX WLZ WLPz EQX EQZ TLX TLZ PSV TLMinX TLLOCALX TLMinZ TLLOCALZ TfX TfZ ML RV RHE RHN

OP+WL
902 1.00 - 1.00 - 1.00 - - 1.00 1.00 - - 1.00 1.00 - 1.00 1.00 1.00 1.00 - - - 1.00 1.00 1.00
For Local Design (Env. 2)
903 1.00 - 1.00 - 1.00 -1.00 -1.00 - - - - -1.00 -1.00 - -1.00 -1.00 -1.00 -1.00 - - - 1.00 -1.00 -1.00
904 1.00 - 1.00 - 1.00 - - -1.00 -1.00 - - -1.00 -1.00 - -1.00 -1.00 -1.00 -1.00 - - - 1.00 -1.00 -1.00
16 905 1.00 - 1.00 - - 1.00 1.00 - - - - 1.00 1.00 - - - - - - - -
Reserve
Without
OP+WL
17 906 1.00 - 1.00 - - - - 1.00 1.00 - - 1.00 1.00 - - - - - - - -
Load
For Global Design (Env. 2)
18 907 1.00 - 1.00 - - -1.00 -1.00 - - - - -1.00 -1.00 - - - - - - - -
19 908 1.00 - 1.00 - - - - -1.00 -1.00 - - -1.00 -1.00 - - - - - - - -
40 909 1.00 0.75 - 1.00 - 1.00 0.75 0.75 - - - - 1.00 1.00 - 1.00 1.00 1.00 1.00 - - - 1.00 1.00 1.00
OP+WL+L

41 910 1.00 0.75 - 1.00 - 1.00 - - 0.75 0.75 - - 1.00 1.00 - 1.00 1.00 1.00 1.00 - - - 1.00 1.00 1.00
For Local Design (Env. 2)
L

42 911 1.00 0.75 - 1.00 - 1.00 -0.75 -0.75 - - - - -1.00 -1.00 - -1.00 -1.00 -1.00 -1.00 - - - 1.00 -1.00 -1.00
43 912 1.00 0.75 - 1.00 - 1.00 - - -0.75 -0.75 - - -1.00 -1.00 - -1.00 -1.00 -1.00 -1.00 - - - 1.00 -1.00 -1.00
913 1.00 - - 1.00 1.00 0.50 0.50 - - - - - - - - - - - - - - - - -
50%WL
TEST +

914 1.00 - - 1.00 1.00 -0.50 -0.50 - - - - - - - - - - - - - - - - -

For Local Design (Env. 2)
915 1.00 - - 1.00 1.00 - - 0.50 0.50 - - - - - - - - - - - - - - -
916 1.00 - - 1.00 1.00 - - -0.50 -0.50 - - - - - - - - - - - - - - -
48 - - - - - - - - - - - - - - - - - - - - - - - - -
OP. + PSV

49 - - - - - - - - - - - - - - - - - - - - - - - - -
Not Required
50 - - - - - - - - - - - - - - - - - - - - - - - - -
51 - - - - - - - - - - - - - - - - - - - - - - - - -
52 917 1.00 1.00 - 1.00 - 1.00 - - - - - - 1.00 1.00 1.00 1.00 1.00 1.00 1.00 - - - 1.00 1.00 1.00
OP. + LL +

53 918 1.00 1.00 - 1.00 - 1.00 - - - - - - -1.00 -1.00 1.00 -1.00 -1.00 -1.00 -1.00 - - - 1.00 -1.00 -1.00
PSV

For Local Design (Env. 2)

54 919 1.00 1.00 - 1.00 - 1.00 - - - - - - -1.00 1.00 1.00 -1.00 -1.00 1.00 1.00 - - - 1.00 -1.00 1.00
55 920 1.00 1.00 - 1.00 - 1.00 - - - - - - 1.00 -1.00 1.00 1.00 1.00 -1.00 -1.00 - - - 1.00 1.00 -1.00

Column & Vertical Bracing shall be designed for global loads only
Beams, Plan Bracing, NSP Supports, Equipement Supports shall be designed for Globle as well as local loads.
* DL shall include only LC 1001,1002 & 1004. Grating (LC 1003) & Fireproofing (LC 1005) shall not be included in DL during erection condition.
** Wind load shall include wind on structures only (LC 6001/7001). Wind on piping and equipment (LC 6003-4/7003-4) shall not be included during erection condition.
ATTACHMENT-5 :TABLE-C "LOAD COMBINATION FOR SERVICEABILITY CRITERIA" USED DURING STATUS-A
Load Sr. Load 1 2 3 4 5 6 7 8 9 10 11 13 14 15 50 51 52 Remarks
Conditions No. Comb DL LL DLempty DLop Test WLX WLZ EQX EQZ TLX TLZ TfX TfZ ML RV RHE RHN
1 111 1.00 - - 1.00 - 1.00 - - - 1.00 1.00 - - - 1.00 1.00 1.00
OP +WL

2 112 1.00 - - 1.00 - - 1.00 - - 1.00 1.00 - - - 1.00 1.00 1.00

3 113 1.00 - - 1.00 - -1.00 - - - -1.00 -1.00 - - - 1.00 -1.00 -1.00
4 114 1.00 - - 1.00 - - -1.00 - - -1.00 -1.00 - - - 1.00 -1.00 -1.00
5 115 1.00 0.75 - 1.00 - 0.75 - - - 1.00 1.00 - - - 1.00 1.00 1.00
OP+Wl+LL

6 116 1.00 0.75 - 1.00 - - 0.75 - - 1.00 1.00 - - - 1.00 1.00 1.00
7 117 1.00 0.75 - 1.00 - -0.75 - - - -1.00 -1.00 - - - 1.00 -1.00 -1.00
8 118 1.00 0.75 - 1.00 - - -0.75 - - -1.00 -1.00 - - - 1.00 -1.00 -1.00
9 121 0.60 - - 0.60 - 1.00 - - - 0.60 0.60 - - - - - -
Reserve
60% OP

Without

Loads

10 122 0.60 - - 0.60 - - 1.00 - - 0.60 0.60 - - - - - -

+WL

11 123 0.60 - - 0.60 - -1.00 - - - -0.60 -0.60 - - - - - -

12 124 0.60 - - 0.60 - - -1.00 - - -0.60 -0.60 - - - - - -
13 125 1.00 - - 1.00 - 1.00 - - - 1.00 1.00 - - - - - -
OP +WL

Reserve
Without

Loads

14 126 1.00 - - 1.00 - - 1.00 - - 1.00 1.00 - - - - - -

15 127 1.00 - - 1.00 - -1.00 - - - -1.00 -1.00 - - - - - -
16 128 1.00 - - 1.00 - - -1.00 - - -1.00 -1.00 - - - - - -

FOR- REFERENCE
- ONLY
Test

17 131 1.00 - - - 1.00 - - - - - - - - - -

18 135 1.00 - - - 1.00 0.50 - - - - - - - - - - -

TEST +WL

19 136 1.00 - - - 1.00 -0.50 - - - - - - - - - - -

20 137 1.00 - - - 1.00 - 0.50 - - - - - - - - - -
21 138 1.00 - - - 1.00 - -0.50 - - - - - - - - - -
22 141 1.00 0.75 - - 1.00 0.38 - - - - - - - - - - -
TEST +
LL+WL

23 142 1.00 0.75 - - 1.00 -0.38 - - - - - - - - - - -

24 143 1.00 0.75 - - 1.00 - 0.38 - - - - - - - - - -
25 144 1.00 0.75 - - 1.00 - -0.38 - - - - - - - - - -
ML+LL

26 145 1.00 1.00 1.00 - - - - - - - - - - 1.00 - - -

ATTACHMENT-5 :TABLE-C "LOAD COMBINATION FOR SERVICEABILITY CRITERIA" USED DURING STATUS-A
Load Sr. Load 1 2 3 4 5 6 7 8 9 10 11 13 14 15 50 51 52 Remarks
Conditions No. Comb DL LL DLempty DLop Test WLX WLZ EQX EQZ TLX TLZ TfX TfZ ML RV RHE RHN
27 151 0.60 - 0.60 - - 1.00 - - - - - - - - - - -
Empty

28 152 0.60 - 0.60 - - -1.00 - - - - - - - - - - -

+WL

29 153 0.60 - 0.60 - - - 1.00 - - - - - - - - - -

30 154 0.60 - 0.60 - - - -1.00 - - - - - - - - - -
31 161 1.00 - - 1.00 - - - 0.70 - 1.00 1.00 - - - 1.00 1.00 1.00
OP+EQ

32 162 1.00 - - 1.00 - - - - 0.70 1.00 1.00 - - - 1.00 1.00 1.00

33 163 1.00 - - 1.00 - - - -0.70 - -1.00 -1.00 - - - 1.00 -1.00 -1.00
34 164 1.00 - - 1.00 - - - - -0.70 -1.00 -1.00 - - - 1.00 -1.00 -1.00
35 165 1.00 0.75 - 1.00 - - - 0.53 - 1.00 1.00 - - - 1.00 1.00 1.00
OP+LL+EQ

36 166 1.00 0.75 - 1.00 - - - - 0.53 1.00 1.00 - - - 1.00 1.00 1.00
37 167 1.00 0.75 - 1.00 - - - -0.53 - -1.00 -1.00 - - - 1.00 -1.00 -1.00
38 168 1.00 0.75 - 1.00 - - - - -0.53 -1.00 -1.00 - - - 1.00 -1.00 -1.00
39 169 0.60 - - 0.60 - - - 0.70 - 0.60 0.60 - - - - - -
Reserve
60% OP

Without

Loads

40 170 0.60 - - 0.60 - - - - 0.70 0.60 0.60 - - - - - -

+EQ

41 171 0.60 - - 0.60 - - - -0.70 - -0.60 -0.60 - - - - - -

42 172 0.60 - - 0.60 - - - - -0.70 -0.60 -0.60 - - - - - -
43 173 1.00 - - 1.00 - - - 0.70 - 1.00 1.00 - - - - - -
Reserve
OP +EQ
Without

Loads

44 174 1.00 - - 1.00 - - - - 0.70 1.00 1.00 - - - - - -

45 175 1.00 - - 1.00 - - - -0.70 - -1.00 -1.00 - - - - - -
46 176 1.00 - - 1.00 - - - - -0.70 -1.00 -1.00 - - - - - -
47 181 0.60 - - - - 1.00 - - - - - - - - - - - **
Erection

48 182 0.60 - - - - -1.00 - - - - - - - - - - - **

**

49 183 0.60 - - - - - 1.00 - - - - - - - - - - **

+WL

50 184 0.60 - - - - - -1.00 - - - - - - - - - - **

** DL shall include only LC 1001 to 1004. Fireproofing (LC 1005) shall not be included in DL during erection condition. Wind load shall include wind on structures only (LC 6001/7001).
Wind on piping and equipment (LC 6003-4/7003-4) shall not be included during erection condition.
ATTACHMENT-5 :TABLE-D "LOAD COMBINATIONS FOR LRFD" - For member Design
Load Sr. Load 1 2 3 4 5 17 6 19 7 20 8 9 10 11 18 12 21 16 22 13 14 15 50 51 52 Remarks
Conditions No. Comb DL LL DLempty DLop Test VL WLX WLPX WLZ WLPz EQX EQZ TLX TLZ PSV TLMinX TLLOCALX TLMinZ TLLOCALZ TfX TfZ ML RV RHE RHN
1 301 1.40 - - 1.40 - - - - - - - - 1.40 1.40 - - - - - 1.40 1.40 - 1.40 1.40 1.40
2 302 1.40 - - 1.40 - - - - - - - - -1.40 -1.40 - - - - - -1.40 -1.40 - 1.40 -1.40 -1.40

OP.
For Global Design
3 303 1.40 - - 1.40 - - - - - - - - 1.40 -1.40 - - - - - 1.40 -1.40 - 1.40 1.40 -1.40
4 304 1.40 - - 1.40 - - - - - - - - -1.40 1.40 - - - - - -1.40 1.40 - 1.40 -1.40 1.40
5 305 1.20 1.60 - 1.20 - - - - - - - - 1.20 1.20 - - - - - 1.20 1.20 - 1.20 1.20 1.20
OP. + LL
6 306 1.20 1.60 - 1.20 - - - - - - - - -1.20 -1.20 - - - - - -1.20 -1.20 - 1.20 -1.20 -1.20
For Global Design
7 307 1.20 1.60 - 1.20 - - - - - - - - -1.20 1.20 - - - - - -1.20 1.20 - 1.20 -1.20 1.20
8 308 1.20 1.60 - 1.20 - - - - - - - - 1.20 -1.20 - - - - - 1.20 -1.20 - 1.20 1.20 -1.20
Test

9 309 1.40 - - - 1.40 - - - - - - - - - - - - - - - - - - - - For Global Design

Test+

10 For Global Design

LL

310 1.20 1.60 - - 1.20 - - - - - - - - - - - - - - - - - - - -

11 311 1.20 1.00 - - 1.20 - 0.80 - - - - - - - - - - - - - - - - - -

50%WL
TEST +

12 312 1.20 1.00 - - 1.20 - -0.80 - - - - - - - - - - - - - - - - - -

LL+

For Global Design

13 313 1.20 1.00 - - 1.20 - - - 0.80 - - - - - - - - - - - - - - - -
14 314 1.20 1.00 - - 1.20 - - - -0.80 - - - - - - - - - - - - - - - -
15 315 1.20 1.60 1.20 - - - - - - - - - - - - - 1.60 - - - For Global Design
M
L

L
L
+

16 316 1.20 1.00 - 1.20 - - 1.60 - - - - - 1.20 1.20 - - - - - - - - 1.20 1.20 1.20
OP+WL+L

17 317 1.20 1.00 - 1.20 - - - - 1.60 - - - 1.20 1.20 - - - - - - - - 1.20 1.20 1.20
For Global Design
L

18 318 1.20 1.00 - 1.20 - - -1.60 - - - - - -1.20 -1.20 - - - - - - - - 1.20 -1.20 -1.20
19 319 1.20 1.00 - 1.20 - - - - -1.60 - - - -1.20 -1.20 - - - - - - - - 1.20 -1.20 -1.20
20 320 0.90 - - 0.90 - - 1.60 - - - - - 0.90 0.90 - - - - - - - - - - -
Reserve
Without
0.9OP +

21 321 0.90 - - 0.90 - - - - 1.60 - - - 0.90 0.90 - - - - - - - - - - -

Load
WL

For Global Design

22 322 0.90 - - 0.90 - - -1.60 - - - - - -0.90 -0.90 - - - - - - - - - - -
23 323 0.90 - - 0.90 - - - - -1.60 - - - -0.90 -0.90 - - - - - - - - - - -
16
Empty +WL

324 0.90 - 0.90 - - - 1.60 - - - - - - - - - - - - - - - - - -

17 325 0.90 - 0.90 - - - -1.60 - - - - - - - - - - - - - - - - - -
For Global Design
18 326 0.90 - 0.90 - - - - - 1.60 - - - - - - - - - - - - - - - -
19 327 0.90 - 0.90 - - - - - -1.60 - - - - - - - - - - - - - - - -
20 328 0.9 (*) - - - - - 1.6(**) - - - - - - - - - - - - - - - - - -
ERECTION

21 329 0.9 (*) - - - - - -1.6(**) - - - - - - - - - - - - - - - - - -

+ WL

For Global Design

22 330 0.9 (*) - - - - - - - 1.6(**) - - - - - - - - - - - - - - - -
23 331 0.9 (*) - - - - - - - -1.6(**) - - - - - - - - - - - - - - - -
20 332 1.20 1.00 - 1.20 - - - - - - 1.00 1.20 1.20 - - - - - - - - 1.20 1.20 1.20
Without OP+LL+EQ

21 333 1.20 1.00 - 1.20 - - - - - - - 1.00 1.20 1.20 - - - - - - - - 1.20 1.20 1.20
For Global Design
22 334 1.20 1.00 - 1.20 - - - - - - -1.00 - -1.20 -1.20 - - - - - - - - 1.20 -1.20 -1.20
23 335 1.20 1.00 - 1.20 - - - - - - - -1.00 -1.20 -1.20 - - - - - - - - 1.20 -1.20 -1.20
24 336 0.90 - - 0.90 - - - - - - 1.00 0.90 0.90 - - - - - - - - - - -
1.2OP+1.0 0.9OP+1.0

Reserve
Loads

25 337 0.90 - - 0.90 - - - - - - - 1.00 0.90 0.90 - - - - - - - - - - -

EQ

For Global Design

26 338 0.90 - - 0.90 - - - - - - -1.00 - -0.90 -0.90 - - - - - - - - - - -
27 339 0.90 - - 0.90 - - - - - - - -1.00 -0.90 -0.90 - - - - - - - - - - -
28 340 1.20 1.00 - 1.20 - - - - - - 1.00 1.20 1.20 - - - - - - - - - - -
Reserve
EQ + LL
Without

Loads

29 341 1.20 1.00 - 1.20 - - - - - - - 1.00 1.20 1.20 - - - - - - - - - - -

For Global Design
30 342 1.20 1.00 - 1.20 - - - - - - -1.00 - -1.20 -1.20 - - - - - - - - - - -
31 343 1.20 1.00 - 1.20 - - - - - - - -1.00 -1.20 -1.20 - - - - - - - - - - -
32 401 1.40 - - 1.40 - 1.40 - - - - - - 1.40 1.40 - 1.40 1.40 1.40 1.40 1.40 1.40 - 1.40 1.40 1.40
33 402 1.40 - - 1.40 - 1.40 - - - - - - -1.40 -1.40 - -1.40 -1.40 -1.40 -1.40 -1.40 -1.40 - 1.40 -1.40 -1.40
OP.

For Local Design

34 403 1.40 - - 1.40 - 1.40 - - - - - - 1.40 -1.40 - 1.40 1.40 -1.40 -1.40 1.40 -1.40 - 1.40 1.40 -1.40
35 404 1.40 - - 1.40 - 1.40 - - - - - - -1.40 1.40 - -1.40 -1.40 1.40 1.40 -1.40 1.40 - 1.40 -1.40 1.40
36 405 1.20 1.60 - 1.20 - 1.20 - - - - - - 1.20 1.20 - 1.20 1.20 1.20 1.20 1.20 1.20 - 1.20 1.20 1.20
OP. + LL

37 406 1.20 1.60 - 1.20 - 1.20 - - - - - - -1.20 -1.20 - -1.20 -1.20 -1.20 -1.20 -1.20 -1.20 - 1.20 -1.20 -1.20
For Local Design
38 407 1.20 1.60 - 1.20 - 1.20 - - - - - - -1.20 1.20 - -1.20 -1.20 1.20 1.20 -1.20 1.20 - 1.20 -1.20 1.20
39 408 1.20 1.60 - 1.20 - 1.20 - - - - - - 1.20 -1.20 - 1.20 1.20 -1.20 -1.20 1.20 -1.20 - 1.20 1.20 -1.20
40 409 1.20 1.00 - 1.20 - 1.20 1.60 1.60 - - - - 1.20 1.20 - 1.20 1.20 1.20 1.20 - - - 1.20 1.20 1.20
OP+WL+L

41 410 1.20 1.00 - 1.20 - 1.20 - - 1.60 1.60 - - 1.20 1.20 - 1.20 1.20 1.20 1.20 - - - 1.20 1.20 1.20
For Local Design
L

42 411 1.20 1.00 - 1.20 - 1.20 -1.60 -1.60 - - - - -1.20 -1.20 - -1.20 -1.20 -1.20 -1.20 - - - 1.20 -1.20 -1.20
43 412 1.20 1.00 - 1.20 - 1.20 - - -1.60 -1.60 - - -1.20 -1.20 - -1.20 -1.20 -1.20 -1.20 - - - 1.20 -1.20 -1.20
44 413 1.20 1.00 - - 1.20 1.20 0.80 0.80 - - - - - - - - - - - - - - - - -
50%WL
TEST +

45 414 1.20 1.00 - - 1.20 1.20 -0.80 -0.80 - - - - - - - - - - - - - - - - -

LL+

For Local Design

46 415 1.20 1.00 - - 1.20 1.20 - - 0.80 0.80 - - - - - - - - - - - - - - -
47 416 1.20 1.00 - - 1.20 1.20 - - -0.80 -0.80 - - - - - - - - - - - - - - -
48 417 1.40 - - 1.40 - 1.40 - - - - - - 1.40 1.40 1.40 1.40 1.40 1.40 1.40 - - - 1.40 1.40 1.40
OP. + PSV

49 418 1.40 - - 1.40 - 1.40 - - - - - - -1.40 -1.40 1.40 -1.40 -1.40 -1.40 -1.40 - - - 1.40 -1.40 -1.40
For Local Design
50 419 1.40 - - 1.40 - 1.40 - - - - - - 1.40 -1.40 1.40 1.40 1.40 -1.40 -1.40 - - - 1.40 1.40 -1.40
51 420 1.40 - - 1.40 - 1.40 - - - - - - -1.40 1.40 1.40 -1.40 -1.40 1.40 1.40 - - - 1.40 -1.40 1.40
52 421 1.20 1.60 - 1.20 - 1.20 - - - - - - 1.20 1.20 1.20 1.20 1.20 1.20 1.20 - - - 1.20 1.20 1.20
OP. + LL +

53 422 1.20 1.60 - 1.20 - 1.20 - - - - - - -1.20 -1.20 1.20 -1.20 -1.20 -1.20 -1.20 - - - 1.20 -1.20 -1.20
PSV

For Local Design

54 423 1.20 1.60 - 1.20 - 1.20 - - - - - - -1.20 1.20 1.20 -1.20 -1.20 1.20 1.20 - - - 1.20 -1.20 1.20
55 424 1.20 1.60 - 1.20 - 1.20 - - - - - - 1.20 -1.20 1.20 1.20 1.20 -1.20 -1.20 - - - 1.20 1.20 -1.20

Column & Vertical Bracing shall be designed for global loads only
Beams, Plan Bracing, NSP Supports, Equipement Supports shall be designed for Globle as well as local loads.
* DL shall include only LC 1001,1002 & 1004. Grating (LC 1003) & Fireproofing (LC 1005) shall not be included in DL during erection condition.
** Wind load shall include wind on structures only (LC 6001/7001). Wind on piping and equipment (LC 6003-4/7003-4) shall not be included during erection condition.
 . Instruction for Using the Program ..

Organization of the Worksheet, Input Method and Output

1
2
3

7
8
9
10

11

12
13

14

15

16

17
 . Instruction for Using the Program ..
The program is simple to use and the guidelines are given for explanation of the program and its executio
Important
THIS PROGRAM IS A SHARED AND DISTRIBUTED FOR ACCELERATING THE LABORIOUS
PROCESSES IN STRUCTURAL ENGINEERING.
SUFFICIENT CARE HAS BEEN TAKEN IN FORMING THIS PROGRAM AND OUTPUT HAS BEEN
VERIFIED WITH SAMPLE PROBLEMS.
PROPER VERIFICATION OF TEXT OUTPUT CREATED BY THIS PROGRAM IS ESSENTIAL BEFORE
USING IT AND THE RESPONSIBILITY LIES WITH USER OF THIS WORKBOOK AND THE
DEVELOPER IS NOT RESPONSIBLE FOR ANY .
in Case of Any Clarification, Suggestion : Contact : jvc@[Link]

Organization of the Worksheet, Input Method and Output

First three rows are meant for writing project information and calculation details.
Fourth row shall be used to provide title for the table, if required.
Row no. 5 shall be used to define the primary load case no which shall be used
in STAAD. The short description (abbreviation) of loading case shall be given
in row no. 6. The abbreviation given in row 6 will be used to write the load
combination description.
Note that the abbreviation defined in row no. 6 will be used for generating load
combination for SAFE and SAP, as both these program recognizes the
alphanumeric load number. If user still wants to use numbering system for these
programs then interchange row 5 and 6.
The definition of primary load cases shall be in continuous columns. The program
terminates when blank column value is encountered in row 5 or 6 depending upon
the program used.
The Column A is left blank for valid reasons. Do not delete even if it is not useful
to you.
The Column B shall be used to identify the load combination Identification.
The Column C shall be used to provide Serial Number to the load combination.
The Load combination number that is to be used in analysis program shall be
provided in Column D. The first combination starts in Cell **D7**. This must
be maintained else program will not function properly. Do not leave any blank
between two load combination. The program terminates at blank value in
Column D.
There is practically no limit on using no. of primary loading cases as long as
Excel and system resources permit. The same applies to no. of loading
combinations to be generated by this module
For each loading combination, provide the numerical load factor against each primary
load cases in this load combination matrix. Use of any other character would lead to
incorrect load combination data.
Provide ( -) in a cell where load factor is zero in that particular load combination.
Press *Run* button provided in 2nd row to generate the data. Follow simple
instruction when the dialog box appears for selection of software and later on.
Do not ignore any alert/instruction. Also, note the location of output file generated.
The program saves the output file in the folder from which the workbook is launched.
Some load combination description may be longer than 72 characters and may not be
recognized by program. Modify such things manually.
The file created by the program will have extension *.prn* and can be opened in any text
editor. Note that, while giving the file name do not provide the extension.
After completing the execution, verify the output data generated by program based on
the input given. User shall be responsible for use of this data.
Close button on the dialog terminates the program and allows the user to work in the
workbook.
Exit button on the dialog terminates the current session and closes the workbook.
and its execution.