Publication #1770-03
EBSRAY PUMPS
G Series
All Models
.....for Bitumen Applications
Head Office and Works
Quality
Endorsed
Company
ISO 9001
Lic 3332
Standards Australia
G Series - All Models
The EBSRAY G SERIES HELICAL GEAR PUMPS are
designed and precision built for high flow/high pressure
transfer of Bitumen and Bitumen Products in mobile and
fixed applications. These pumps handle a range of product
viscosities and temperatures and are available in different
sizes/capacities.
Specifications
Max Flows to . . . . . . . . . . . . . . . . . . . . . . . . . 1,875 L/min
Max Differential pressures to . . . . . . . . . . . . . 2,000 kPa
Viscosity to . . . . . . . . . . . . . . . . . . . . . . . . . 1,000,000 cSt
Road Sprayer equipped with EBSRAY G Series
Pump & EBSRAY SB Series Spraybar Temperatures to . . . . . . . . . . . . . . . . . . . . . . . . . . 280C
Porting . . . . . . . . . . . . . . . . . . Special High Flow Design
Refer Dimensions for details
Features
Hardened Helical Cut Gears for extended service life.
Internal or External tank mounting.
Reversible Rotation.
Low maintenance.
Extra heavy duty build - excellent service life.
Simple design for ease of maintenance.
Excellent Self Priming capability.
Enlarged inlet porting.
Road Sprayer in action - note even distribution from Balanced hydraulic axial thrust.
G Series pump.
High temperature shaft packing.
Pulse-Free Operation
Shaft design options available to order
Typical Services / Industries
Road Spraying/Road Tankers
Recirculation
Road and Rail Tanker loading/unloading
Bulk transfer
Bitumen blending plants
Cutback and Emulsion duties
G Series Pumps provide high volume for rapid Allied Equipement
bitumen application.
Manufactured by EBSRAY includes Spraybars, Internal
Gear Pumps, Lobe Pumps, Vane Pumps and Bypass or
Pressure Relief Valves
Assured Quality and Performance
EBSRAYs ISO 9001 Quality System assures compliance
with high safety and quality standards demanded by the
Bitumen Industry.
All Ebsray G Series pumps are run tested and inspected
prior to dispatch to guarantee pump integrity and
performance in accordance with the specifications.
Fixed installation EBSRAY model G25 pump in
All Ebsray Bitumen Pumps, Pumpsets are
Bitumen Blend Plant. quality engineered in Australia
Engineered in Australia 2
Features
Casing Porting
Robust Cast Iron Enlarged inlet port for
increased pumping efficiency
Rotors (Gears) Shaft Seal
Hardened gears Hydraulic Packed
- Helical cut Axially Gland PTFE Lubricated
balanced - no axial aramid fibre
loading
Quiet operation
Shaft
High tensile steel
Low deflection
Sleeve Bearings Accurately ground
Product Lubricated, bearing journal surfaces
spiral grooved
Gunmetal
Performance
2000
1800 G25
1600 G22
1400
FLOW L/min
1200
G14
1000
800
600
400
200
0
100 200 300 400 500 600 700 800
SPEED (RPM)
The above graph shows the performance envelope of EBSRAY G Series Helical gear pumps
at nominal Differential Pressure = 100 kPa & Viscosity = 100 cSt.
(For actual Performances, refer specific Performance Curves for each Pump Model)
NOTES
1. Pump selection is dependent upon adequate NPSHA (Available) 4. Internal pump clearances will affect hydraulic slip. Therefore, slip
for optimum performance and operation at selected speed. calculations must be considered for final pump speed determination
2. Pump suitability may be affected by Discharge Pressure (Casing in every selection. Clearances are determined/affected by: a) pump
pressure), Differential Pressure (Bearing loading), Viscosity of materials of construction, and/or, b) product temperature, and/or,
product (Shaft size/torque limitations, sleeve bearing material). c) product viscosity, and/or, d) shear sensitivity of product, and/or
Check with EBSRAY or your local Representative as required. e) condition of Pump due to service/wear.
3. For Kinematic Viscosity greater than 20,000 cSt, we recommend
conferring directly with EBSRAY or local Representative.
3
Dimensions
Standard unpacked weight
(approx)
Model Weight
G14 69kg
G22 89kg
G25 94kg
Warranty
All Ebsray manufactured pumps and
equipment are warranted for a full 12
months against faulty workmanship and/or
materials. Refer to Ebsray or Factory
Appointed Representative.
Note
All specifications and illustrations are
EXTERNAL MOUNT PUMP typical only and subject to revision
INTERNAL MOUNT PUMP without notice.
Certified data available on request
STANDARD SHAFT SHOWN.
FOR AVAILABILITY OF OTHER
SHAFT OPTIONS TO REFER
TO EBSRAY.
MAJOR PUMP DIMENSIONS (millimetres)
PUMP
MODEL A B C C1 D E F G H I K L M N P P1 Q Q1 S T
G14 95.3 76.2
205 44.5 279.4 108 209.6 158.8 90 123.8 108 78.7 57.2 133.4 73 184 54 95.3 76.2
G14 50 76.2 57.3
G22 134 114.3
140 69.9 289 108 209.6 158.8 90 127 114.3 114.8 57.2 205.6 73 184 54 134 114.3
G22 50 108 88.9
G25 134 114.3
152.4 69.9 280 108 209.6 158.8 90 127 114.3 124.3 57.2 224.7 73 164.5 54 134 114.3
G25 50 108 88.9
MAJOR PUMP DIMENSIONS (millimetres)
PUMP
MODEL U V W X Y Z S1 T1 U1 V1 X1 Y1 A1 A2 A3 R1 R2 D1 AA BB
G14 5/8 1/2
31.8 101.6 76.2 47.6 88.9 216 - 127 45 76.2 45 - 9.5 40.6 31.1 67.8 24 36.5
BSW BSW
G14
G22 5/8 1/2
63.5 89 127 47.6 88.9 216 69.9 172 57.2 101.6 57.2 69.9 9.5 40.6 31.1 71 24 36.5 BSW BSW
G22
G25 5/8 1/2
63.5 89 127 47.6 88.9 216 69.9 172 57.2 101.6 57.2 69.9 9.5 40.6 31.1 71 24 36.5 BSW BSW
G25
EBS-RAY PUMPS PTY. LIMITED
DISTRIBUTED BY: ACN 000 061 003
Head Office and Works Branch Office Victoria
628 Pittwater Road Phone: (03) 9706 7263
Brookvale NSW 2100 Australia. Fax: (03) 9706 7312
Telephone: (61 2) 9905 0234 Branch Office Queensland
Fax: (61 2) 9938 3825 Phone: (07) 3260 7411
Email: nswsales@[Link] Fax: (07) 3260 7422
[Link]
ISO 9001
Lic 3332
Standards
Australia
Quality
PRINTED IN AUSTRALIA EXPORT PUBLICATION Endorsed Publication # 1770-03
Company
