0% found this document useful (0 votes)
174 views10 pages

Manufacturer SDS

SDS

Uploaded by

Jack Ault
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
174 views10 pages

Manufacturer SDS

SDS

Uploaded by

Jack Ault
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

SAFETY DATA SHEET

1. Identification
Product identifier Acrolein
Other means of identification
Item N-11030
Synonym(s) 2-PROPENAL
Recommended use For Laboratory Use Only
Recommended restrictions None known.
Manufacturer/Importer/Supplier/Distributor information
Manufacturer
Company name Chem Service, Inc.
Address 660 Tower Lane
West Chester, PA 19380
United States
Telephone Toll Free 800-452-9994
Direct 610-692-3026
Website [Link]
E-mail info@[Link]
Emergency phone number Chemtrec US 800-424-9300
Chemtrec outside US +1 703-527-3887

2. Hazard(s) identification
Physical hazards Flammable liquids Category 2
Health hazards Acute toxicity, oral Category 2
Acute toxicity, dermal Category 2
Acute toxicity, inhalation Category 1
Skin corrosion/irritation Category 1
Serious eye damage/eye irritation Category 1
Environmental hazards Hazardous to the aquatic environment, acute Category 1
hazard
Hazardous to the aquatic environment, Category 1
long-term hazard
OSHA defined hazards Not classified.

Label elements

Signal word Danger


Hazard statement Highly flammable liquid and vapor. Fatal if swallowed. Fatal in contact with skin. Causes severe
skin burns and eye damage. Causes serious eye damage. Fatal if inhaled. Very toxic to aquatic
life. Very toxic to aquatic life with long lasting effects.
Precautionary statement
Prevention Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only outdoors or in a
well-ventilated area. Keep container tightly closed. Ground/bond container and receiving
equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking
tools. Take precautionary measures against static discharge. Do not breathe vapor. Do not get in
eyes, on skin, or on clothing. Wash thoroughly after handling. Do not eat, drink or smoke when
using this product. Avoid release to the environment. Wear protective gloves/protective
clothing/eye protection/face protection. Wear respiratory protection.
Response If swallowed: Immediately call a poison center/doctor. If swallowed: Rinse mouth. Do NOT induce
vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with
water/shower. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in
eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing. Immediately call a poison center/doctor. Specific treatment is urgent (see
this label). Take off immediately all contaminated clothing and wash it before reuse. In case of
fire: Use appropriate media to extinguish. Collect spillage.
Material name: Acrolein SDS US

12809 Version #: 01 Issue date: 06-11-2014 1 / 10


Storage Store in a well-ventilated place. Keep container tightly closed. Store in a well-ventilated place.
Keep cool. Store locked up.
Disposal Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise Static accumulating flammable liquid can become electrostatically charged even in bonded and
classified (HNOC) grounded equipment. Sparks may ignite liquid and vapor. May cause flash fire or explosion.
Supplemental information Not applicable.

3. Composition/information on ingredients
Substances
Chemical name Common name and synonyms CAS number %
Acrolein 2-PROPENAL 107-02-8 100
*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.

4. First-aid measures
Inhalation Remove victim to fresh air and keep at rest in a position comfortable for breathing. Oxygen or
artificial respiration if needed. Do not use mouth-to-mouth method if victim inhaled the substance.
Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other
proper respiratory medical device. Call a physician or poison control center immediately.
Skin contact Take off immediately all contaminated clothing. Rinse skin with water/shower. Call a physician or
poison control center immediately. Chemical burns must be treated by a physician. Wash
contaminated clothing before reuse.
Eye contact Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Call a physician or poison control center immediately.
Ingestion Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If
vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Do not use
mouth-to-mouth method if victim ingested the substance. Induce artificial respiration with the aid of
a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Most important Burning pain and severe corrosive skin damage. Causes serious eye damage. Symptoms may
symptoms/effects, acute and include stinging, tearing, redness, swelling, and blurred vision. Permanent eye damage including
delayed blindness could result.
Indication of immediate Provide general supportive measures and treat symptomatically. Thermal burns: Flush with water
medical attention and special immediately. While flushing, remove clothes which do not adhere to affected area. Call an
treatment needed ambulance. Continue flushing during transport to hospital. Chemical burns: Flush with water
immediately. While flushing, remove clothes which do not adhere to affected area. Call an
ambulance. Continue flushing during transport to hospital. In case of shortness of breath, give
oxygen. Keep victim warm. Keep victim under observation. Symptoms may be delayed.
General information Take off immediately all contaminated clothing. In the case of accident or if you feel unwell, seek
medical advice immediately (show the label where possible). Ensure that medical personnel are
aware of the material(s) involved, and take precautions to protect themselves. Wash contaminated
clothing before reuse. Discard any shoes or clothing items that cannot be decontaminated.

5. Fire-fighting measures
Suitable extinguishing media Alcohol resistant foam. Water fog. Carbon dioxide (CO2). Dry chemical powder, carbon dioxide,
sand or earth may be used for small fires only.
Unsuitable extinguishing Do not use water jet as an extinguisher, as this will spread the fire.
media
Specific hazards arising from Vapors may form explosive mixtures with air. Vapors may travel considerable distance to a source
the chemical of ignition and flash back. This product is a poor conductor of electricity and can become
electrostatically charged. If sufficient charge is accumulated, ignition of flammable mixtures can
occur. To reduce potential for static discharge, use proper bonding and grounding procedures.
This liquid may accumulate static electricity when filling properly grounded containers. Static
electricity accumulation may be significantly increased by the presence of small quantities of water
or other contaminants. Material will float and may ignite on surface of water. During fire, gases
hazardous to health may be formed.
Special protective equipment Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
and precautions for firefighters
Fire-fighting In case of fire and/or explosion do not breathe fumes. Move containers from fire area if you can do
equipment/instructions so without risk.
Specific methods Use standard firefighting procedures and consider the hazards of other involved materials.
General fire hazards Highly flammable liquid and vapor.

Material name: Acrolein SDS US

12809 Version #: 01 Issue date: 06-11-2014 2 / 10


6. Accidental release measures
Personal precautions, Immediately evacuate personnel to safe areas. Keep unnecessary personnel away. Keep people
protective equipment and away from and upwind of spill/leak. Keep out of low areas. Eliminate all ignition sources (no
emergency procedures smoking, flares, sparks, or flames in immediate area). Wear appropriate protective equipment and
clothing during clean-up. Do not breathe vapor. Fully encapsulating, vapor protective clothing
should be worn for spills and leaks with no fire. Do not touch damaged containers or spilled
material unless wearing appropriate protective clothing. Ventilate closed spaces before entering
them. Use appropriate containment to avoid environmental contamination. Transfer by mechanical
means such as vacuum truck to a salvage tank or other suitable container for recovery or safe
disposal. Local authorities should be advised if significant spillages cannot be contained. For
personal protection, see section 8 of the SDS.
Methods and materials for Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Take
containment and cleaning up precautionary measures against static discharge. Use only non-sparking tools. Keep combustibles
(wood, paper, oil, etc.) away from spilled material. This material is classified as a water pollutant
under the Clean Water Act and should be prevented from contaminating soil or from entering
sewage and drainage systems which lead to waterways.

Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is
possible. Cover with plastic sheet to prevent spreading. Use a non-combustible material like
vermiculite, sand or earth to soak up the product and place into a container for later disposal.
Following product recovery, flush area with water.

Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to
remove residual contamination.

Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
Environmental precautions Avoid release to the environment. Contact local authorities in case of spillage to drain/aquatic
environment. Prevent further leakage or spillage if safe to do so. Do not contaminate water. Avoid
discharge into drains, water courses or onto the ground. Use appropriate containment to avoid
environmental contamination.

7. Handling and storage


Precautions for safe handling Vapors may form explosive mixtures with air. Do not handle, store or open near an open flame,
sources of heat or sources of ignition. Protect material from direct sunlight. Minimize fire risks from
flammable and combustible materials (including combustible dust and static accumulating liquids)
or dangerous reactions with incompatible materials. Handling operations that can promote
accumulation of static charges include but are not limited to: mixing, filtering, pumping at high flow
rates, splash filling, creating mists or sprays, tank and container filling, tank cleaning, sampling,
gauging, switch loading, vacuum truck operations. Take precautionary measures against static
discharges. All equipment used when handling the product must be grounded. Use non-sparking
tools and explosion-proof equipment. Do not breathe vapor. Do not get this material in contact with
eyes. Do not get this material in contact with skin. Do not taste or swallow. Avoid prolonged
exposure. Do not get this material on clothing. Use only outdoors or in a well-ventilated area. Wear
appropriate personal protective equipment. Observe good industrial hygiene practices. When
using, do not eat, drink or smoke. Wash hands thoroughly after handling. Wash contaminated
clothing before reuse. Avoid release to the environment. Do not empty into drains.

For additional information on equipment bonding and grounding, refer to the Canadian Electrical
Code in Canada, (CSA C22.1), or the American Petroleum Institute (API) Recommended Practice
2003, "Protection Against Ignitions Arising out of Static, Lightning, and Stray Currents" or National
Fire Protection Association (NFPA) 77, "Recommended Practice on Static Electricity" or National
Fire Protection Association (NFPA) 70, "National Electrical Code".

Conditions for safe storage, Store locked up. Keep away from heat, sparks and open flame. Prevent electrostatic charge
including any incompatibilities build-up by using common bonding and grounding techniques. Avoid spark promoters. Eliminate
sources of ignition. Ground/bond container and equipment. These alone may be insufficient to
remove static electricity. Store in original tightly closed container. Store in a cool, dry place out of
direct sunlight. Store in a well-ventilated place. Refrigeration recommended. Store away from
incompatible materials (see Section 10 of the SDS). Keep in an area equipped with sprinklers.

8. Exposure controls/personal protection


Occupational exposure limits
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
Material Type Value
Acrolein (CAS 107-02-8) PEL 0.25 mg/m3
0.1 ppm
US. ACGIH Threshold Limit Values
Material Type Value
Acrolein (CAS 107-02-8) Ceiling 0.1 ppm

Material name: Acrolein SDS US

12809 Version #: 01 Issue date: 06-11-2014 3 / 10


US. NIOSH: Pocket Guide to Chemical Hazards
Material Type Value
Acrolein (CAS 107-02-8) STEL 0.8 mg/m3
0.3 ppm
TWA 0.25 mg/m3
0.1 ppm
Biological limit values No biological exposure limits noted for the ingredient(s).
Exposure guidelines
US - California OELs: Skin designation
Acrolein (CAS 107-02-8) Can be absorbed through the skin.
US ACGIH Threshold Limit Values: Skin designation
Acrolein (CAS 107-02-8) Can be absorbed through the skin.
Appropriate engineering Explosion-proof general and local exhaust ventilation. Good general ventilation (typically 10 air
controls changes per hour) should be used. Ventilation rates should be matched to conditions. If
applicable, use process enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure limits have not been
established, maintain airborne levels to an acceptable level. Eye wash facilities and emergency
shower must be available when handling this product.
Individual protection measures, such as personal protective equipment
Eye/face protection Wear eye/face protection. Wear safety glasses with side shields (or goggles) and a face shield.

Skin protection
Hand protection Wear appropriate chemical resistant gloves.
Other Wear appropriate chemical resistant clothing.
Respiratory protection Wear positive pressure self-contained breathing apparatus (SCBA).
Thermal hazards Wear appropriate thermal protective clothing, when necessary.
General hygiene When using, do not eat, drink or smoke. Do not get this material on clothing. Always observe good
considerations personal hygiene measures, such as washing after handling the material and before eating,
drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove
contaminants.

9. Physical and chemical properties


Appearance
Physical state Liquid.
Form Liquid
Color Colorless
Odor Not available.
Odor threshold Not available.
pH 6 10% aqueous solution
Melting point/freezing point -125.86 F (-87.7 C)
Initial boiling point and boiling 126.68 F (52.6 C)
range
Flash point -15.0 F (-26.1 C) Closed Cup
< -0.4 F (< -18.0 C) Open Cup
Evaporation rate Not available.
Flammability (solid, gas) Not available.
Upper/lower flammability or explosive limits
Flammability limit - lower Not available.
(%)
Flammability limit - upper Not available.
(%)
Explosive limit - lower (%) Not available.
Explosive limit - upper (%) Not available.
Vapor pressure 36.53 kPa at 25 C
Vapor density 1.94
Relative density Not available.
Solubility(ies)
Solubility (water) 400 g/l

Material name: Acrolein SDS US

12809 Version #: 01 Issue date: 06-11-2014 4 / 10


Partition coefficient 0
(n-octanol/water)
Auto-ignition temperature 428 F (220 C)
Decomposition temperature Not available.
Viscosity Not available.
Other information
Density 0.8389 g/cm3
Dynamic viscosity 0.35 mPa.s
Dynamic viscosity 68 F (20 C)
temperature
Flammability class Flammable IB estimated
Kinematic viscosity 0.42 mm/s estimated
Molecular formula C3-H4-O
Molecular weight 56.06 g/mol
Percent volatile 100 %
Specific gravity 0.84 at 20 C
VOC (Weight %) 100 %

10. Stability and reactivity


Reactivity The product is stable and non-reactive under normal conditions of use, storage and transport.
Chemical stability Material is stable under normal conditions.
Possibility of hazardous Hazardous polymerization does not occur.
reactions
Conditions to avoid Avoid heat, sparks, open flames and other ignition sources. Avoid temperatures exceeding the
flash point. Contact with incompatible materials.
Incompatible materials Acids. Ammonia. Amines.
Hazardous decomposition No hazardous decomposition products are known.
products

11. Toxicological information


Information on likely routes of exposure
Ingestion Fatal if swallowed. Causes digestive tract burns.
Inhalation Fatal if inhaled.
Skin contact Fatal in contact with skin. Causes severe skin burns.
Eye contact Causes serious eye damage.
Symptoms related to the Burning pain and severe corrosive skin damage. Causes serious eye damage. Symptoms may
physical, chemical and include stinging, tearing, redness, swelling, and blurred vision. Permanent eye damage including
toxicological characteristics blindness could result.
Information on toxicological effects
Acute toxicity Fatal if inhaled. Fatal in contact with skin. Fatal if swallowed. Expected to be a low hazard for
usual industrial or commercial handling by trained personnel.
Product Species Test Results
Acrolein (CAS 107-02-8)
Acute
Dermal
LD50 Rabbit 231 mg/kg
Inhalation
LC50 Hamster, Syrian 58 mg/m3, 4 Hours
Rat 60 ppm, 30 Minutes
7 ppm
7 ppm, 4 Hours
LD50 Cat 690 ppm, 2 Hours
11 ppm, 3 Hours
Rat 130 ppm, 30 Minutes
Oral
LD50 Mouse 13.9 mg/kg

Material name: Acrolein SDS US

12809 Version #: 01 Issue date: 06-11-2014 5 / 10


Product Species Test Results
Rabbit 7 mg/kg
Rat 10.3 mg/kg
Other
LD50 Mouse 30 mg/kg
Rat 50 mg/kg

* Estimates for product may be based on additional component data not shown.
Skin corrosion/irritation Causes severe skin burns and eye damage.
Serious eye damage/eye Causes serious eye damage.
irritation
Respiratory or skin sensitization
Respiratory sensitization Not available.
Skin sensitization This product is not expected to cause skin sensitization.
Germ cell mutagenicity No data available to indicate product or any components present at greater than 0.1% are
mutagenic or genotoxic.
Carcinogenicity This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.
IARC Monographs. Overall Evaluation of Carcinogenicity
Acrolein (CAS 107-02-8) 3 Not classifiable as to carcinogenicity to humans.
US. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050)
Not listed.
Reproductive toxicity This product is not expected to cause reproductive or developmental effects.
Specific target organ toxicity - Not classified.
single exposure
Specific target organ toxicity - Not classified.
repeated exposure
Aspiration hazard Not available.
Chronic effects Prolonged inhalation may be harmful.

12. Ecological information


Ecotoxicity Very toxic to aquatic life with long lasting effects. Accumulation in aquatic organisms is expected.
Product Species Test Results
Acrolein (CAS 107-02-8)
Aquatic
Crustacea EC50 Water flea (Daphnia magna) 0.03 mg/l, 48 hours
Fish LC50 Fathead minnow (Pimephales promelas) 0.014 mg/l, 96 hours

* Estimates for product may be based on additional component data not shown.
Persistence and degradability No data is available on the degradability of this product.
Bioaccumulative potential Not available.
Partition coefficient n-octanol / water (log Kow)
-0.01
Mobility in soil No data available.
Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation
potential, endocrine disruption, global warming potential) are expected from this component.

13. Disposal considerations


Disposal instructions Collect and reclaim or dispose in sealed containers at licensed waste disposal site. This material
and its container must be disposed of as hazardous waste. Do not allow this material to drain into
sewers/water supplies. Do not contaminate ponds, waterways or ditches with chemical or used
container. Dispose of contents/container in accordance with local/regional/national/international
regulations.
Local disposal regulations Dispose in accordance with all applicable regulations.
Hazardous waste code The waste code should be assigned in discussion between the user, the producer and the waste
disposal company.
US RCRA Hazardous Waste P List: Reference
Acrolein (CAS 107-02-8) P003

Material name: Acrolein SDS US

12809 Version #: 01 Issue date: 06-11-2014 6 / 10


Waste from residues / unused Dispose of in accordance with local regulations. Empty containers or liners may retain some
products product residues. This material and its container must be disposed of in a safe manner (see:
Disposal instructions).
Contaminated packaging Empty containers should be taken to an approved waste handling site for recycling or disposal.
Since emptied containers may retain product residue, follow label warnings even after container is
emptied.

14. Transport information


DOT
UN number UN1092
UN proper shipping name Acrolein, stabilized, MARINE POLLUTANT
Transport hazard class(es)
Class 6.1(PGI, II)
Subsidiary risk 3
Label(s) 6.1, 3
Packing group I
Environmental hazards
Marine pollutant Yes
Special precautions for user Read safety instructions, SDS and emergency procedures before handling.
Special provisions 1, B9, B14, B30, B42, B77, T22, TP2, TP7, TP13, TP38, TP44
Packaging exceptions None
Packaging non bulk 226
Packaging bulk 244
IATA
UN number UN1092
UN proper shipping name Acrolein, stabilized
Transport hazard class(es)
Class 6.1(PGIII)
Subsidiary risk 3
Packing group Not applicable.
Environmental hazards No.
ERG Code 6H
Special precautions for user Read safety instructions, SDS and emergency procedures before handling.
Other information
Passenger and cargo Allowed.
aircraft
Cargo aircraft only Allowed.
IMDG
UN number UN1092
UN proper shipping name ACROLEIN, STABILIZED, MARINE POLLUTANT
Transport hazard class(es)
Class 6.1(PGI, II)
Subsidiary risk 3
Packing group I
Environmental hazards
Marine pollutant Yes
EmS F-E, S-D
Special precautions for user Read safety instructions, SDS and emergency procedures before handling.
Transport in bulk according to Not available.
Annex II of MARPOL 73/78 and
the IBC Code
DOT

Material name: Acrolein SDS US

12809 Version #: 01 Issue date: 06-11-2014 7 / 10


IATA

IMDG

Marine pollutant

15. Regulatory information


US federal regulations This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication
Standard, 29 CFR 1910.1200.
All components are on the U.S. EPA TSCA Inventory List.
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)
Not regulated.
CERCLA Hazardous Substance List (40 CFR 302.4)
Acrolein (CAS 107-02-8) Listed.
SARA 304 Emergency release notification
Acrolein (CAS 107-02-8) 1 LBS
US. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050)
Not listed.
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Hazard categories Immediate Hazard - Yes
Delayed Hazard - No
Fire Hazard - Yes
Pressure Hazard - No
Reactivity Hazard - No
SARA 302 Extremely hazardous substance
Chemical name CAS number Reportable Threshold Threshold Threshold
quantity planning quantity planning quantity, planning quantity,
lower value upper value
Acrolein 107-02-8 1 500 lbs
SARA 311/312 Hazardous Yes
chemical
SARA 313 (TRI reporting)
Chemical name CAS number % by wt.
Acrolein 107-02-8 100
Other federal regulations
Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List
Acrolein (CAS 107-02-8)
Material name: Acrolein SDS US

12809 Version #: 01 Issue date: 06-11-2014 8 / 10


Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)
Acrolein (CAS 107-02-8)
Clean Water Act (CWA) Hazardous substance
Section 112(r) (40 CFR Priority pollutant
68.130) Toxic pollutant
Safe Drinking Water Act Contaminate candidate list
(SDWA)
US state regulations
US. Massachusetts RTK - Substance List
Acrolein (CAS 107-02-8)
US. New Jersey Worker and Community Right-to-Know Act
Acrolein (CAS 107-02-8) 500 LBS
US. Pennsylvania RTK - Hazardous Substances
Acrolein (CAS 107-02-8)
US. Rhode Island RTK
Acrolein (CAS 107-02-8)
US. California Proposition 65
California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain
any chemicals currently listed as carcinogens or reproductive toxins.
International Inventories
Country(s) or region Inventory name On inventory (yes/no)*
Australia Australian Inventory of Chemical Substances (AICS) Yes
Canada Domestic Substances List (DSL) Yes
Canada Non-Domestic Substances List (NDSL) No
China Inventory of Existing Chemical Substances in China (IECSC) Yes
Europe European Inventory of Existing Commercial Chemical Yes
Substances (EINECS)
Europe European List of Notified Chemical Substances (ELINCS) No
Japan Inventory of Existing and New Chemical Substances (ENCS) Yes
Korea Existing Chemicals List (ECL) Yes
New Zealand New Zealand Inventory Yes
Philippines Philippine Inventory of Chemicals and Chemical Substances Yes
(PICCS)
United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory Yes
*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)
A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing
country(s).

16. Other information, including date of preparation or last revision


Issue date 06-11-2014
Version # 01
NFPA ratings Health: 4
Flammability: 3
Instability: 3

Material name: Acrolein SDS US

12809 Version #: 01 Issue date: 06-11-2014 9 / 10


Disclaimer The above information is believed to be correct on the date it was last revised and must not be
considered all inclusive. The information has been obtained only by a search of available literature
and is only a guide for handling the chemicals. OSHA regulations require that if other hazards
become evident, an upgraded SDS must be made available to the employee within three months.
RESPONSIBILITY for updates lies with the employer and not with CHEM SERVICE, Inc.

Persons not specifically and properly trained should not handle this chemical or its container. This
product is furnished FOR LABORATORY USE ONLY! Our products may NOT BE USED as drugs,
cosmetics, agricultural or pesticide products, food additives or as household chemicals.

This Safety Data Sheet (SDS) is intended only for use with Chem Service, Inc. products and
should not be relied on for use with materials from any other supplier even if the chemical name(s)
on the product are identical! Whenever using an SDS for a solution or mixture the user should
refer to the SDS for every component of the solution or mixture. Chem Service warrants that this
SDS is based upon the most current information available to Chem Service at the time it was last
revised. THIS WARRANTY IS EXCLUSIVE, AND CHEM SERVICE, INC. MAKES NO OTHER
WARRANTY, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. This SDS is provided
gratis and CHEM SERVICE, INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR CONTINGENT DAMAGES.

Copyright 2000-2014 Chem Service, Inc. All rights reserved except that this SDS may be printed
for the use of a customer or prospective customer of Chem Service, Inc provided the entire SDS is
printed. The SDS may not be placed in any database or otherwise stored or distributed in
electronic or any other form.

This product is furnished FOR LABORATORY USE ONLY.

Material name: Acrolein SDS US

12809 Version #: 01 Issue date: 06-11-2014 10 / 10

You might also like