Scribd
Upload
236 views1 page

Split Pin Size and Dimensions Guide

The document provides specifications for split pins according to JIS B 1351. It includes nominal dimensions in millimeters for diameters ranging from 0.6 to 5 mm and lengths ranging from 4 to 63 mm. Tolerances are given for dimensions d, D, a, and lengths. Applicable bolt and pin diameters are listed with minimum and maximum values. Pin hole diameters are provided with tolerances. Part number structure is also described.

Uploaded by

Luis Carlos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
236 views1 page

Split Pin Size and Dimensions Guide

The document provides specifications for split pins according to JIS B 1351. It includes nominal dimensions in millimeters for diameters ranging from 0.6 to 5 mm and lengths ranging from 4 to 63 mm. Tolerances are given for dimensions d, D, a, and lengths. Applicable bolt and pin diameters are listed with minimum and maximum values. Pin hole diameters are provided with tolerances. Part number structure is also described.

Uploaded by

Luis Carlos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Split Pins JIS B 1351（Ref.

Unit : mm

Nominals 0.6 0.8 1 1.2 1.6 2 2.5 3 3.2 4 5


Basic Dimension 0.5 0.7 0.9 1 1.4 1.8 2.3 2.7 2.9 3.7 4.6
d
　0 　0
Tolerance
−0.1 −0.2
Basic Dimension 1 1.4 1.8 2 2.8 3.6 4.6 5.5 5.8 7.4 9.2
D
　0 　0 　0 　0 　0 　0 　0 　0
Tolerance
−0.1 −0.2 −0.3 −0.4 −0.6 −0.7 −0.9 −1.2
a Approx. 2 2.4 3 3 3.2 4 5 6 6.4 8 10
H Approx. 1.6 1.6 1.6 2.5 2.5 2.5 2.5 3.2 3.2 4 4
Min. － 2.5 3.5 4.5 5.5 7 9 11 11 14 20
Applicable Bolts
Bolt Max. 2.5 3.5 4.5 5.5 7 9 11 14 14 20 27
and
Pin
Clevis
Min. － 2 3 4 5 6 8 9 9 12 17
Diameter
Pins
Max. 2 3 4 5 6 8 9 12 12 17 23

Pin Hole Diameter (Ref.) 0.6 0.8 1 1.2 1.6 2 2.5 3 3.2 4 5
4
5
±0.5
6
8 ±0.5
10
12
14 ±0.5
15
±0.5
16
18
±0.8
20 ±0.8
Length 22
25 ±0.8
r 28
30 ±0.8 ±0.8
32
35
36 ±1.2
±1.2
40
45
50
55
56
60
63

Remarks 1. N
 ominal diameter is relative to diameter of pin hole diameter.
2. Value of “d” is measured between Head and l/2r.
3. Standard lengths (r) represented in Bold Border. Please contact Taiyo for customer spcified lengths.
4. When properly sized, there should be no noticeable wobble of Split Pin.

Part Number Structure (Standardized Product Code)


Product
code 137 Material
code 49…SUS304-W1
Product Surface Example: φ4 × R20

1 3 7 4 9 0 1 4 0 0 2 0
Surface
code 01…Burnished Hardness Material Nominal Diameter Length

No.46−23

You might also like