Scribd
Upload
698 views1 page

Project Specification Compliance Statement

The document is a compliance statement from Trags Engineering for a standby diesel generator project at Qatar Academy. It summarizes Trags Engineering's compliance with the project specifications for 1) references to standards for rotating electrical machines and engines, and 2) the requirement for a main fuel storage tank. For the main fuel storage tank specification, Trags notes it is not included as filling system and arrangements will be provided by the main contractor, and Cummins will only supply the day tank.

Uploaded by

Mohameduwais Badurdeen Haqqiyul Qadiri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
698 views1 page

Project Specification Compliance Statement

The document is a compliance statement from Trags Engineering for a standby diesel generator project at Qatar Academy. It summarizes Trags Engineering's compliance with the project specifications for 1) references to standards for rotating electrical machines and engines, and 2) the requirement for a main fuel storage tank. For the main fuel storage tank specification, Trags notes it is not included as filling system and arrangements will be provided by the main contractor, and Cummins will only supply the day tank.

Uploaded by

Mohameduwais Badurdeen Haqqiyul Qadiri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Compliance statement

Project : Qatar Academy Expansion R0, 04-07-2018


Contractor : Trags Engineering
Genset Model : Cummins C1400D5

Reference to the SECTION 21 ELECTRICAL WORKS 1.13 PART17 STANDBY DIESEL GENERATOR and our offer ref: CQ-SA-02-07-0401-R0, please note the compliance as below:

# SPECIFICATIO SPECIFICATION REQUIREMENTS COMPLIANCE REMARKS


N REFERENCE STATUS
1. SECTION 21 Item 17.1.3. References: clause 1. BS 4999 .General requirements for rotating electrical machines. Comply
ELECTRICAL Specification for rating and performance.
WORKS 1.13
PART 17 Standard reference shall be replaced with BS EN 60034-1 :2010- Rotating electrical machines. Part Comply
STANDBY 1: Rating and performance.
DIESEL
GENERATOR Item 17.1.3. References: clause 1. BS 5514. Engines. Comply

Standard reference shall be replaced with BS ISO 3046-1 :2002- Reciprocating internal combustion Comply
engines. Performance. Part 1: Declarations of power, fuel and lubricating oil consumptions, and
test methods. Additional requirements for engines for general use.

Item 17.2 Products: clause 17.2.1 Diesel Generator set: sub clause (d)(iii) Main Fuel Storage Tank Not included Filling system and arrangements by
The clause shall be read as 'no provision of bulk storage required for the project' the Main Contractor/ Trags.
Cummins will supply only the fuel
day tank.
End of Part

This is a preliminary compliance for evaluation purpose. Final compliance will be provided along with the technical submittal.

CQ-PGA-005_Rev00: 31-03-2015 Page 1 of 1

You might also like