Scribd
Upload
655 views2 pages

Fabric Quality Control Process

The document outlines the quality control process for fabrics at a garment manufacturer. It involves 1) customers nominating fabrics from mills, 2) receiving fabric headers to check for shrinkage and shade variation, 3) marking legs and blankets on the headers using templates, 4) washing the legs and blankets, 5) measuring shrinkage, 6) shading the headers, 7) creating a shade sheet for cutting, 8) receiving and inspecting full fabric rolls, 9) stacking the fabrics, and 10) issuing fabrics to the cutting department.

Uploaded by

Anonymous ad33hus1bS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
655 views2 pages

Fabric Quality Control Process

The document outlines the quality control process for fabrics at a garment manufacturer. It involves 1) customers nominating fabrics from mills, 2) receiving fabric headers to check for shrinkage and shade variation, 3) marking legs and blankets on the headers using templates, 4) washing the legs and blankets, 5) measuring shrinkage, 6) shading the headers, 7) creating a shade sheet for cutting, 8) receiving and inspecting full fabric rolls, 9) stacking the fabrics, and 10) issuing fabrics to the cutting department.

Uploaded by

Anonymous ad33hus1bS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

1 Quality Department

1.1 Fabric Store and FID


Nomination by Fabric
Fabric Stacking
Customer Inspection

Fabirc/Header Shade Sheet to Issuance to


Recieving Cutting Cutting

Marking for Leg Shading of


and Blanket Headers

Washing of Leg Shrinkage


and Blanket Measurement

1.1.1 Nomination by Customer


Different fabric mills develop fabric and present it to customer in exhibitions. Customer selects
some finishes and recommend garment manufacturer to buy fabric from a nominated customer.
1.1.2 Fabric/Header Receiving
If fabric is being produced by local industries of Pakistan, then before dispatch of fabric rolls to
garment industry, headers of 1-meter length are sent for fabric shrinkage and shade variation.
Commercial department receives headers and handover it to FID for further process.
IF fabric is being imported, then fabric mill send fabric rolls and fabric store cut headers of 1-
meter length for shrinkage and shading purpose.

1.1.3 Marking for Leg and Blanket


For making leg, a template of 60*60 cm2 is used for this purpose. Template is placed on header
fabric and traced.
1.1.4 Washing of Leg and Blanket
1.1.5 Shrinkage Measurement
1.1.6 Shading of Headers
1.1.7 Shade Sheet to Cutting
1.1.8 Fabric Receiving
1.1.9 Fabric Inspection
1.1.10 Fabric Stacking
1.1.11 Issuance to Cutting

You might also like