CMP PRODUCTS CABLE GLAND ACCESSORY CATALOGUE

CMP PRODUCTS THREAD CONVERSIONS & ACCESSORIES

ADAPTOR REDUCER

737 TECHNICAL DATA

Design Specification BS 6121:Part 1:1989

737 Adaptors & Reducers, Globally Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel Only

Approved, Explosive Atmosphere Cable / ATEX Certificate SIRA13ATEX1265X

Conduit Accessory
^ II 2G Ex d IIC Gb, Ex e IIC Gb, II 1D Ex ta IIIC Da
Code of Protection ^ IM2 Ex d I Mb, Ex e I Mb
• Used for thread conversion (II 2G Ex e IIC Gb, II 1D Ex ta IIIC Da only on Nylon version)

• Wide range of thread types & sizes Compliance Standards EN 60079-0,1,7,31

• General purpose / industrial version available

IECEx Certificate IECEx SIR13.0094X, IECEx SIM 15.0002X
• Equipment interface ‘O’ ring seal available
Ex d I Mb, Ex e I Mb, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da
Code of Protection
• -60˚C to +200˚C (metallic versions) (Ex e IIC Gb , Ex ta IIIC Da only on nylon version)

• Reducers Globally marked: Compliance Standards IEC 60079-0,1,7,31

- IECEx, ATEX, UL & cCSAus

cCSAus Certificate 1055233
• Adaptors Globally marked:
Class I, Groups A, B, C and D; IP66, 67, 68; Enclosure Type 4X; Class II groups E, F and G;
- 1 Step up in size: IECEx, ATEX, cCSAus Code of Protection Class III, Ex de II, Class I, Zone 1, AEx de II;
(Not available in Nylon)
- 2 Step up in size: IECEx, ATEX C22.2 No.0, 0.5, 30, 94,CAN/CSA E60079-0,1, 7, CAN-CSA 61241-1-1, UL50 Edition 11,
Compliance Standards
UL1203 Edition 4, UL 60079-0,1,7

UL Certificate E214221 (Reducers with NPT or Metric Threads only)

Code of Protection Class I Groups A,B,C,D; Class II Groups E,F,G; Class III

Compliance Standards UL 1203

EAC Certificate TC RU C-GB.AA87.B.00487

GOST R Industrial Certificate POCC GB. AГ35.H00102

CMP 737 Adaptor CMP 737 Reducer
UkrSEPRO UA.TR.047.C.0644-15

HOW TO ORDER KCs KOSHA Certificate 14-GA4BO-0249X

e.g. 737-D-M-2M-3-4 = Dual Certified Ex d & Ex e – M20 (M) x M25 CCOE / PESO (India) Certificate P333688
(F) - Stainless Steel
NEPSI Certificate GYJ18.1254U
Please refer to Ordering Guide Tables for reference definitions,
denoting material variants. When ordering please notify CMP Compliance Standards GB3836.1, 2, 3
Products in your order if alternative approval markings are
required. INMETRO Approval TÜV 12.1332X

When ordering Adaptors & Reducers always state the Male RETIE Approval 03866
Thread size first.
Marine Approvals LRS: 01/00173, BV: 43180 A1 BV, ABS: 17-LD1619350-PDA
Other Thread Variations are available on request. For further
information on ordering please refer to page 150. Continuous Operating Temperature -60°C to +200°C (Metallic), -20°C to +60°C (Nylon)

It should be noted that when using CMP Type 737 Thread Ingress Protection Rating** IP66, IP67 & IP68***
Conversion Adaptors and Reducers in association with
Explosion Protected electrical equipment the following basic Available Materials Electroless Nickel Plated Brass, Brass, Nylon, Stainless Steel, Aluminium
rules must be observed in line with good engineering practice:
** When CMP installation accessories are used. Refer to page 7 or www.cmp-products.com for further information.
1. For direct entry Ex d applications, only adaptor or *** IP68 tested to a minimum depth of 30 metres for 12 hours, alternate depths / durations can be provided upon request
reducer should be used per cable entry.

2. The female connection thread of a Thread Conversion

Adaptor shall “step” not more than two “size” up in the
case of a thread gender change. Example; M20 (M) to
M32 (F) or M20 (M) to 1” NPT (F) is permitted. Whereas
M20 (M) to M40 (F) or M20 (M) to 1½” NPT (F) is not
permitted.

www.cmp-products.com TDS500 REV12 06/18

 CMP PRODUCTS CABLE GLAND ACCESSORY CATALOGUE

737 Dimension Data Tables B B B

CMP PRODUCTS THREAD CONVERSIONS & ACCESSORIES

FEMALE
FEMALE
(F) (F)

1 Select male thread from the left hand column of Table ‘A’ A A
C C C C
MALEMALE
A
C

(M) (M)
2 Select the female thread size from the top of Table ‘A’, referenced ‘A**’ for Adaptor and ‘R**’ for Reducer

3 Using this code reference, please refer to the corresponding dimensions in Table ‘B’
ADAPTOR REDUCER

TABLE A - FEMALE THREAD SIZE

METRIC NPT
M16 M20 M25 M32 M40 M50 M63 M75 M90 M100 ½” ¾” 1” 1¼” 1½” 2” 2½” 3” 3½” 4”
M16 A01 A04 A08 A03 A08

M20 R01 A05 A07 A12 A05 A11 A15

M25 R05 R03 A09 A14 A18 R03 A09 A16 A18

M32 R06 R06 R06 A17 A19 A24 R06 R06 A17 A19 A24
METRIC

M40 R08 R08 R08 R08 A20 A29 A33 R08 R08 R08 A21 A25 A33

M50 R10 R10 R10 R10 R10 A28 A35 A49 R11 R11 R10 R10 A27 A32 A42 A52
TABLE A - MALE THREAD SIZE

M63 R12 R12 R12 R12 R12 A37 A48 A53 R12 R12 R12 R12 R12 A37 A44 A53

M75 R14 R14 R14 R14 R16 R15 A47 A55 A57 R14 R14 R14 R14 R14 A46 A55 A61

M90 R19 R19 R17 R19 A60 R18

M100 R20 R20 R20 A58

½” R02 A06 A07 A12 A02 A10 A15

¾” R04 R04 A09 A16 A22 R04 A09 A16 A18

1” R07 R07 R07 A13 A19 R07 R07 A17 A19 A24

1¼” R09 R09 R09 R09 A20 A23 R09 R09 R09 A20 A25 A30

1½” R10 R10 R10 R11 A26 A43 R10 R10 R10 R10 A26 A31 A41
NPT

2” R12 R12 R12 R12 R12 A36 A43 R12 R12 R12 R12 R12 A39 A50

2½” R14 R14 R14 R14 R13 R13 A40 R14 R14 R14 R14 R14 R14 A45 A54

3” R17 R19 R19 R18 R19 R19 A56 R17 R18 R18 R18 R18 R19 A51 A59 A62

3½” R17 R20 R20 R20 R20 R20 R20 R20 R20 R20 R20

4” R21 R21 R21 R21 R21 R21 R21 R21 R21

TABLE B - REDUCERS TABLE B - ADAPTORS

Table A Across Across Table A Across Across Minimum Table A Across Across Minimum Table A Across Across Minimum
Ref. Flats ‘A’ Corners ‘B’ Ref. Flats ‘A’ Corners ‘B’ Bore ‘C’ Ref. Flats ‘A’ Corners ‘B’ Bore ‘C’ Ref. Flats ‘A’ Corners ‘B’ Bore ‘C’

R01 24.0 26.4 A01 22.0 24.2 9.7 A23 55.0 60.5 32.1 A45 80.0 88.0 60.5

R02 27.0 29.7 A02 24.0 26.4 14.0 A24 55.0 60.5 26.0 A46 80.0 88.0 65.0

R03 30.0 33.0 A03 24.0 26.4 9.7 A25 55.0 60.5 32.0 A47 84.0 92.4 68.0

R04 31.5 34.7 A04 24.0 26.4 10.0 A26 55.0 60.5 38.0 A48 90.2 99.2 53.0

R05 31.5 34.7 A05 24.0 26.4 14.0 A27 55.0 60.5 43.6 A49 90.2 99.2 42.0

R06 37.6 41.4 A06 27.0 29.7 14.0 A28 59.8 65.8 44.2 A50 95.0 104.5 49.0

R07 41.0 45.1 A07 30.0 33.0 14.0 A29 60.0 66.0 32.1 A51 95.0 104.5 75.0

R08 46.0 50.6 A08 30.0 33.0 9.7 A30 65.0 71.5 32.0 A52 100.0 110.0 44.2

R09 50.0 55.0 A09 30.0 33.0 20.0 A31 65.0 71.5 38.0 A53 100.0 110.0 55.0

R10 55.0 60.5 A10 30.5 33.6 14.0 A32 65.0 71.5 44.2 A54 100.0 110.0 60.5

R11 60.0 66.0 A11 31.5 34.7 14.0 A33 70.0 77.0 32.0 A55 100.0 110.0 64.8

R12 70.0 77.0 A12 36.0 39.6 14.0 A34 70.0 77.0 38.0 A56 100.0 110.0 75.0

R13 79.0 86.9 A13 36.0 39.6 26.0 A35 70.0 77.0 44.2 A57 110.0 121.0 61.0

R14 80.0 88.0 A14 37.6 41.4 20.0 A36 70.0 77.0 49.0 A58 110.0 121.0 75.0

R15 84.0 92.4 A15 41.0 45.1 14.0 A37 70.0 77.0 53.0 A59 110.0 121.0 75.0

R16 90.2 99.2 A16 41.0 45.1 20.0 A38 70.0 77.0 32.1 A60 110.0 121.0 79.3

R17 95.0 104.5 A17 41.0 45.1 26.0 A39 79.0 86.9 49.0 A61 110.0 121.0 68.3

R18 98.8 108.7 A18 46.0 50.6 20.0 A40 79.0 86.9 60.0 A62 117.5 129.3 75.0

R19 100.0 110.0 A19 46.0 50.6 26.0 A41 80.0 88.0 38.0
Additional sizes available upon request
R20 110.0 121.0 A20 46.0 50.6 32.1 A42 80.0 88.0 44.2 Minimum reducer bore determined by female thread
R21 123.0 135.3 A21 50.0 55.0 32.0 A43 80.0 88.0 49.0 Dimensions displayed in millimetres
R22 127.0 139.7 A22 50.0 55.0 20.0 A44 80.0 88.0 55.0

www.cmp-products.com TDS500 REV12 06/18

 CMP PRODUCTS CABLE GLAND ACCESSORY CATALOGUE

737 Sizing Table

CMP PRODUCTS THREAD CONVERSIONS & ACCESSORIES

MALE THREAD FEMALE THREAD

1 ¼” NPT / NPS (M)

1 ½” NPT / NPS (M)

2 ½” NPT / NPS (M)

3 ½” NPT / NPS (M)

½” NPT / NPS (M)
¾” NPT / NPS (M)

2” NPT / NPS (M)

3” NPT / NPS (M)

4” NPT / NPS (M)

1” NPT / NPS (M)

1 ¼” BSPP
1 ½” BSPP

2 ½” BSPP
½” BSPP
¾” BSPP

2” BSPP

3” BSPP
1” BSPP
1 ¼” ET
1 ½” ET

2 ½” ET
5/8” ET

PG13.5
2” ET

3” ET

PG48
1” ET
¾”ET

PG36
PG42
PG29
PG21
PG16
PG11
M40
M50
M63
M20
M25
M32

M75
M16

PG9
PG7
Size

M16
M20
M25
M32
M40
M50
M63
M75
5/8” ET
¾” ET
1” ET
1 ¼” ET
1 ½” ET
2” ET
2 ½” ET
3”ET
PG7
PG9
PG11
PG13.5
PG16
PG21
PG29
PG36
PG42
PG48
½” NPS (M)
¾” NPS (M)
1” NPS (M)
1 ¼” NPS (M)
1 ½” NPS (M)
2” NPS (M)
2 ½” NPS (M)
3” NPS (M)
3 ½” NPS (M)
4” NPS (M)
½” NPT
¾” NPT
1” NPT
1 ¼” NPT
1 ½” NPT
2” NPT
2 ½” NPT
3” NPT
3 ½” NPT
4” NPT
½” BSPP
¾” BSPP
1” BSPP
1 ¼” BSPP
1 ½” BSPP
2” BSPP
2 ½” BSPP
3” BSPP

Ex d, Ex e & Ex ta Certified Reducer Additional sizes available upon request

For specific certification information please contact CMP Products
Ex d, Ex e & Ex ta Certified Adaptor
Adaptors Marked
Non-Certified Adaptor
1 Step up in size- IECEx, ATEX, cCSAus
2 Steps up in size - IECEx, ATEX

www.cmp-products.com TDS500 REV12 06/18