STARTER BOX
WATER PUMP 75HP
ELECTRIC MOTOR HYD. TANK CAB INGRESS/EGRESS
CABLE REEL 62 GALLON CAP.
90"
2286mm
AIR TANK
HYD. POWERED
AIR/OIL COOLER AIR COMPRESSOR FRONT STABILIZER
OPTIONAL:
REAR STABILIZERS
MSHA CANOPY
OPTIONAL HYD. ADJUST SHOWN
475 1/2"
12076mm
ACF 14 FEED
18" SIGHT LINE (ACF 12 IS 2 FT. SHORTER)
457mm
O 28"
711mm 132"
3353mm
78" FEED EXTENSION 64 1/2"
1981mm 60" (1524 mm) 1643mm
61"
1554mm
48 1/2" 15°
1232mm 99°
13" PERB 45 BOOM
330mm
90 1/2" 109 1/2" CAT 312 CRAWLERS
2304mm 2780mm OPTIONAL JHF CRAWLERS AVAILABLE
DESIRED
CENTER OF GRAVITY
DIMENSIONS AND TOLERANCES IN INCHES
AFFECTED PARTS
AFFECTED
SERIAL NUMBERS
DISPOSITION OF PARTS IN PROCESS DISPOSITION OF EXISTING STOCK
UNLESS OTHERWISE SPECIFIED :
BREAK CORNERS
0.005" - 0.015"
J. H. FLETCHER & CO. C
THIS DRAWING IN DESIGN AND DETAIL IS OUR PROPERTY AND MUST NOT BE USED EXCEPT
USE AS IS REWORK SCRAP USE AS IS REWORK SCRAP
COMMENTS
PROJECTION ANGLE IN CONNECTION WITH OUR WORK. ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
DECIMALS
AFFECTED PARTS
AFFECTED
SERIAL NUMBERS
DISPOSITION OF PARTS IN PROCESS DISPOSITION OF EXISTING STOCK
USE AS IS REWORK SCRAP USE AS IS REWORK SCRAP
0.X +/- .03
COMMENTS
AFFECTED PARTS
[Link] +/- 0.01
AFFECTED
FRACTIONS +/- 1/16"
SERIAL NUMBERS
DISPOSITION OF PARTS IN PROCESS DISPOSITION OF EXISTING STOCK
USE AS IS REWORK SCRAP USE AS IS REWORK SCRAP
COMMENTS
AFFECTED PARTS
AFFECTED
SERIAL NUMBERS
DISPOSITION OF PARTS IN PROCESS DISPOSITION OF EXISTING STOCK
[Link] +/- 0.005 ANGLES +/- 1 DEGREE
USE AS IS REWORK SCRAP USE AS IS REWORK SCRAP
COMMENTS
AFFECTED PARTS
UNLESS OTHERWISE SPECIFIED ALL STEEL
CJ151E FACE DRILL
AFFECTED
SERIAL NUMBERS
SPECIFICATIONS ARE:
DISPOSITION OF PARTS IN PROCESS DISPOSITION OF EXISTING STOCK
USE AS IS REWORK SCRAP USE AS IS REWORK SCRAP
COMMENTS
AFFECTED PARTS
AFFECTED
HRS PLATE --- A36
A RELEASED
SERIAL NUMBERS
10/1/10 SCF DISPOSITION OF PARTS IN PROCESS
USE AS IS
COMMENTS
REWORK SCRAP
DISPOSITION OF EXISTING STOCK
USE AS IS REWORK SCRAP
HRS BAR --- A36 OR 1020
CHANGE
LEVEL DATE BY REVISION DISPOSITION ALLOY BAR --- 4140/4142 HEAT TREATED
FORMS
WELDING STANDARDS:
DO NOT CHANGE MANUALLY SEE 359370 DOCUMENT ON JHF WELDING BY SHEET DWG REV
STANDARDS AND SPECIFICATIONS. WELD
MAT'L WT. 0.0 lbm SYMBOLS OR NOTES ON DRAWING SUPERCEDE
359370 DOCUMENT
SCF 1 OF 2 16-06-35-66 A
RANGE DIAGRAM 60"
12" 1524mm
305mm
206"
5227mm
266"
6751mm
37 1/2"
952mm
GROUND LEVEL
304"
7716mm
DIMENSIONS AND TOLERANCES IN INCHES
AFFECTED PARTS
AFFECTED
SERIAL NUMBERS
DISPOSITION OF PARTS IN PROCESS DISPOSITION OF EXISTING STOCK
UNLESS OTHERWISE SPECIFIED :
BREAK CORNERS
0.005" - 0.015"
J. H. FLETCHER & CO. C
THIS DRAWING IN DESIGN AND DETAIL IS OUR PROPERTY AND MUST NOT BE USED EXCEPT
USE AS IS REWORK SCRAP USE AS IS REWORK SCRAP
COMMENTS
PROJECTION ANGLE IN CONNECTION WITH OUR WORK. ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED.
DECIMALS
AFFECTED PARTS
AFFECTED
SERIAL NUMBERS
DISPOSITION OF PARTS IN PROCESS DISPOSITION OF EXISTING STOCK
USE AS IS REWORK SCRAP USE AS IS REWORK SCRAP
0.X +/- .03
COMMENTS
AFFECTED PARTS
[Link] +/- 0.01
AFFECTED
FRACTIONS +/- 1/16"
SERIAL NUMBERS
DISPOSITION OF PARTS IN PROCESS DISPOSITION OF EXISTING STOCK
USE AS IS REWORK SCRAP USE AS IS REWORK SCRAP
COMMENTS
AFFECTED PARTS
AFFECTED
SERIAL NUMBERS
DISPOSITION OF PARTS IN PROCESS DISPOSITION OF EXISTING STOCK
[Link] +/- 0.005 ANGLES +/- 1 DEGREE
USE AS IS REWORK SCRAP USE AS IS REWORK SCRAP
COMMENTS
AFFECTED PARTS
UNLESS OTHERWISE SPECIFIED ALL STEEL
CJ151E FACE DRILL
AFFECTED
SERIAL NUMBERS
SPECIFICATIONS ARE:
DISPOSITION OF PARTS IN PROCESS DISPOSITION OF EXISTING STOCK
USE AS IS REWORK SCRAP USE AS IS REWORK SCRAP
COMMENTS
AFFECTED PARTS
AFFECTED
SERIAL NUMBERS
DISPOSITION OF PARTS IN PROCESS
USE AS IS REWORK SCRAP
DISPOSITION OF EXISTING STOCK
USE AS IS REWORK SCRAP
HRS PLATE --- A36
HRS BAR --- A36 OR 1020
COMMENTS
CHANGE
LEVEL DATE BY REVISION DISPOSITION ALLOY BAR --- 4140/4142 HEAT TREATED
FORMS
WELDING STANDARDS:
DO NOT CHANGE MANUALLY SEE 359370 DOCUMENT ON JHF WELDING BY SHEET DWG REV
STANDARDS AND SPECIFICATIONS. WELD
MAT'L WT. SYMBOLS OR NOTES ON DRAWING SUPERCEDE
359370 DOCUMENT
SCF 2 OF 2 16-06-35-66 A
