Scribd
Upload
99 views1 page

Indian Institute of Technology Roorkee Department of Civil Engineering CEN 305 Design of Steel Elements Tutorial No. 1

The document provides tutorial instructions to calculate wind loads at the joints of a simply supported pin jointed steel truss with a spacing of 4 meters for an industrial building located in Delhi with an eaves height of 6.5 meters. Students are asked to assume normal permeability for the building and calculate wind loads based on the given figure and location details for Delhi.

Uploaded by

Mayank Raj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
99 views1 page

Indian Institute of Technology Roorkee Department of Civil Engineering CEN 305 Design of Steel Elements Tutorial No. 1

The document provides tutorial instructions to calculate wind loads at the joints of a simply supported pin jointed steel truss with a spacing of 4 meters for an industrial building located in Delhi with an eaves height of 6.5 meters. Students are asked to assume normal permeability for the building and calculate wind loads based on the given figure and location details for Delhi.

Uploaded by

Mayank Raj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

INDIAN INSTITUTE OF TECHNOLOGY ROORKEE

Department of Civil Engineering

CEN 305 Design of Steel Elements


Tutorial No. 1

1. Calculate the wind loads at the joints of the simply supported pin jointed steel truss
(Spacing of trusses = 4 m) of an industrial building shown in the figure below. The
structure is situated in Delhi (upwind slope <3o) and the eaves height is 6.5 m.
Assume normal permeability for the building.

You might also like