University of the East
College of Engineering
Civil Engineering Department
Prestress Formula for the Bonded and
Unbonded
Tendons ( Ultimate Strength Design)
Plate No.
Belleza, Charlie S.
20141146885 Rating
NSCP 2015 (7th Edition)
Section [Link] STRESS IN BONDED PRESTRESSED REINFORCEMENT AT
NOMINAL FLEXURAL STRENGTH, fps
Section [Link].1 Formula for fps permitted for members with bonded
prestressed reinforcement IF all prestressed reinforcement is IN THE
TENSION ZONE and fps ≥ 0.5fpu
Where:
If compression reinforcement is considered for the calculation of fps
by Eqn. [Link].1, (a) and (b) shall be satisfied:
NOTE: According to Section [Link], Tensile strength fpu shall be
based in the specified grade or type of Prestressing reinforcement and
shall not exceed the values given in Table [Link].
Section [Link] STRESS IN UNBONDED PRESTRESSED REINFORCEMENT AT
NOMINAL FLEXURAL STRENGTH, fps
Section [Link].1 Values of fps calculated in accordance with Table
[Link].1 shall be permitted for members prestressed with unbonded
tendons IF fse ≥ 0.5fpu
Where
Section [Link] PERMISSIBLE TENSILE STRESSES IN PRESTRESSED
REINFORCEMENT
The tensile stresses in prestressed reinforcement shall not exceed the
limits in Table [Link].1.
Reference:
NSCP 2015 (7th Edition)