[Link].
com
Downloaded From Rejinpaul Network
[Link]
Downloaded From Rejinpaul Network
[Link]
[Link]
[Link]
[Link]
[Link]
[Link]
[Link]
[Link]
I ililil Iilil Iilil ilil tilt tilt illt Reg. No. :
Question Paper code: 50487
B. E./[Link]. DE GREE DGMINATIoN, NO\IEMBERIDE CEMBER zaLT
Fifth Semester . -',
Electrical and Electronics Engineerid$nr. rcccntq ucstion paper' com
EE65O3 - POWER ELECTRONICS
(Common to : Electronics and Instrumentation Engineering/Instrumentation
and
Control Engineering/lVlechatronics Engineering)
(Regulations 2013)
Time: Three Hours Maximum: 100 Marks
PART -A (10x2-20 Marks)
1. Why Tliac is not popular as compared to SCR ? Justifr.
2. What are the advantages of IGBTs ?
3. Distinguish between sJrnmetric and asyrmmetric semiconductor configuration.
4. Define input power factor.
5. What is the effect of load inductance on the load current waveforms in the case of
DC chopper ?
6. what is the disadvantage of frequency modulated chopper ?
7. state the necessity of return current diodes in inverter.
8. what is the function of feedback diodes in bridge inverter ?
9. Why is half wave,ACloltage regulator not used.? ,*
10. Explain the terrn sequence control of ac voltage regulators.
'$t"tJagc$\q\IG5to$e"f-'Go$-
fiilil lilll illl lllil lilll llll lill
50487 -2- I
PART -B (5x13=65 Marks)
11" a) Explain the static and switching characteristics of IGBT and MOSFET. (18)
(oR)
b) Explain why triac is rarely used in I quadrant with negative pulse and in
III quadrant with positive pulse. (13)
L2, a) Explain the functional modes of dual converter with necessary diagrams. (13)
(oR)
uuwJ . reccntquestion Pa Pcr . cofll
b) Explain the operation of 3 phase fully controlled bridge rectifier with necessary
wavefomrs. (13)
13. a) Explain the working ofbuck converter with neat waveform and also derive the
expression ofpeak to peak voltage across the capacitor. (18)
(oR)
b) Explain the steady state analysis of step down chopper. (18)
L4. a) Explain the operation of series resonant inverter. (18)
(oR)
b) Discuss the operation of 180o conduction of three phase inverter. (18)
15. a) Explain the operation of single phase to single phase cycloconverter. (1s)
(oR)
b) Explain the operation of matrix converter. (13)
PART -C (1x15=15 Marks)
16. a) A single-phase, half-wave rectifier with an AC voltage of 150 v has a pure resistive
load of 9 Cr. The firing angle o of the thyristor ,,%. Determine the
a) Rectification efficiency
b) Form factor coq
Pa?cr'
c) Transformer derating factor $$l$t'
1 scGntQuegtton
d) Peak inverse voltage of the SCR
e) Ripple factor of the output voltage.
Assume that the transformer ratio is 2 : 1.
(oR)
Iililil lilililil]ril lilltilllil 5A487
b) The series resonance turn-off circuit of Fig. 16 b has the following data :
E = 160 v, L = 8 MH, resistance ofinductor coil 11 = 0.2 Q, Rn = 0.6 Q and C = 65 pF .
Determine:
a) Derive an erq)ression forthe current(t).
b) The pulsewidth and
c) The time required for the capacitor voltage to attain a voltage equal to 1.7 E.
Fig. 16. b
[Link]
[Link]
[Link]
[Link]