InteliLite
AMF25
Order code: IL3AMF25BAA
Controller for single gen-set applications
Datasheet
Product description
Single gen-set controller for Stand-by and Prime- Flexible event based history with up to 350
power applications events
Direct communication with EFI engines Load shedding, dummy load capability
Total remote monitoring and control Tier 4 final support
Automatic temperature based cooling/heating
Key features
Comprehensive gen-set protections
Easy to install, configure and use
Multipurpose flexible timers
Wide range of communication capabilities
True RMS measurement
including:
Available also in low temperature (LT) version
connection via RS232, RS485, CAN and on
board USB Application overview
internet access using Ethernet, GPRS or 4G
support for Modbus and SNMP protocols
Internal PLC support with PLC editor and
monitor included in LiteEdit
Cloud-based monitoring and control via
WebSupervisor
Active SMS and emails in different languages
SNMP traps
Geofencing and tracking via WebSupervisor
2x 10 A binary outputs for cranking and fuel
solenoid
Option for up to 16 additional binary
inputs/outputs
|InteliLite Datasheet |Related HW ver: 1.1 |Related SW ver: 1.1.0 |Date of issue: 21.3.2016 1
Technical data
Power supply Binary outputs
Power supply range 8-36 VDC 2 high current output, non-isolated
Number
394 mA / 8 VDC 6 low current output, non-isolated
255 mA / 12 VDC Max. 10 A for 10 s, 5 A long term
Power consumption
140 mA / 24 VDC current 0,5 A
97 mA / 36 VDC Switching
positive supply terminal
RTC battery Replaceable to
2 A (without BOUT consumption
Fusing Analog inputs
nor extension modules)
Number 4 non-isolated
Operating conditions Type Resistor
Operating Resolution 0,1 Ω
-20 ˚C to +70 ˚ C
temperature Range 0-2500 Ω
Operating Input impedance 800 Ω
temperature for LT -40 ˚C to +70 ˚ C
±2 % from range in range
version
Accuracy 0-2500 Ω
Storage temperature -30 ˚C to +80 ˚ C
±1,5 kΩ in range 2,5-15 kΩ
Operating humidity 95 % w/o condensation
5-25 Hz, ± 1,6 mm Magnetic pick-up
Vibration
25-100 Hz, a = 4 g 4 Vpk-pk to 50 Vpk-pk in
Shocks a = 500 m/s2 range 4 Hz to 1 kHz
6 Vpk-pk to 50 Vpk-pk in
Voltage measurement Voltage input range
range 1 kHz to 5 kHz
3ph-n Gen voltage 10 Vpk-pk to 50 Vpk-pk in
Measurement inputs range 5 kHz to 10 kHz
3ph-n Mains
Measurement range 277 V Frequency input
4 Hz to 10 kHz
range
Max. allowed voltage 350 V
Frequency
Accuracy 1%
measurement 0,2 % from range 10 kHz
Frequency range 40-70 Hz (accuracy 0.1 Hz) tolerance
0,72 MΩ ph-ph
Input impedance Communications
0,36 MΩ ph-n
USB port Non-isolated
Current measurement
CAN bus, 250 kbps, max 200 m, 120 Ω
Measurement CAN 1 termination option
3ph-n Gen voltage
inputs non- isolated
Measurement
5A
range
Max. allowed
10 A
current
1,5 % for full temperature range (1 %
Accuracy
from 0 ˚C to 50 ˚C)
Input
< 0,1 Ω
impedance
Binary inputs
Number 8, non-isolated
0-2 VDC close contact
Close/Open indication
>6 VDC open contact
InteliLite Datasheet 2
Dimensions, terminals and mounting
Note: Dimension x depends on extension module.
Panel door mounting Overview of parameter x
Plug-in module Parameter x [mm]
CM-RS232-485 105 @ RS232 / 62 @ RS485
CM-Ethernet 95
USB 85
CM-GPRS Depends on connector of antenna
EM-BIO8 62
CM-4G-GPS Depends on connector of antenna
Note: The controller is to be mounted into panel doors as a standalone unit using provided metal holders. The
requested cut-out size is 187x132 mm. Use the screw holders delivered with the controller to fix the controller
into the door.
InteliLite Datasheet 3
Available extension modules
Product Description Order code
CM-4G-GPS GSM modem / 4G wireless internet and GPS locator CM14GGPSXBX
CM-Ethernet Ethernet interface CM2ETHERXBX
CM-GPRS GSM modem / GPRS wireless internet CM2GPRSXXBX
CM-RS232-485 Dual port interface CM223248XBX
EM-BIO8-EFCP 8 additional binary inputs/outputs; current measurement EM2BIO8EXBX
Functions and protections
The described product fully supports the following functions and protections as defined by ANSI (American
National Standards Institute):
Description ANSI code Descritption ANSI code
Over voltage 59 Load shedding 32P
Under voltage 27 Overload 32
Voltage asymmetry and Phase rotation** 47 Power factor 55
Over frequency 81H Temperature 49T
Under frequency 81L Gas (fuel) level 71
Over current* 50 + 51 Earth fault current 50N + 64
Current unbalance 46
* Short current only ** Fixed setting
Certificates and standards
EN 61000-6-1
EN 61000-6-2
EN 61000-6-3
EN 61000-6-4
EN 61010-1
EN 61000-2-1 (-20°C/16h for std, -40°C/16h for LT version)
EN 61000-2-2 (70°C/16h)
EN 61000-2-6 (2÷25Hz / ±1,6mm; 25÷100Hz / 4,0g)
EN 60068-2-2(a=500m/s^2)
EN 60068-2-30(25/55/25°C; humidity at 97% ; 2 cycles)
EN 60529 (front panel IP65, back side IP20)
IEC61010-2-030:2010/Measerument category II
Manufacturer:
ComAp a.s. Fax: +420 266 316 647
Czech Republic E-mail: [email protected]
Phone: +420 246 012 111 Internet: www.comap.cz
InteliLite Datasheet 4
