Scribd
Upload
119 views1 page

90S-B3 Low Alloy Steel Filler Wire

This document provides information on Automig 90S-B3 and Tigfil 90S-B3 filler wires for welding low alloy steel. The wires have a copper coating and deposit welds with 2.25% Cr and 1% Mo contents, providing good strength, toughness, and creep resistance up to 600°C. Typical applications include welding creep resistant steels and joining materials for high temperature applications in refineries and power plants. Mechanical property and creep test data is provided to demonstrate the wires' suitability for these demanding applications.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
119 views1 page

90S-B3 Low Alloy Steel Filler Wire

This document provides information on Automig 90S-B3 and Tigfil 90S-B3 filler wires for welding low alloy steel. The wires have a copper coating and deposit welds with 2.25% Cr and 1% Mo contents, providing good strength, toughness, and creep resistance up to 600°C. Typical applications include welding creep resistant steels and joining materials for high temperature applications in refineries and power plants. Mechanical property and creep test data is provided to demonstrate the wires' suitability for these demanding applications.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

AUTOMIG 90S-B3 / GMAW/GTAW

LOW ALLOY STEEL


TIGFIL 90S-B3 (High Temperature)

2.25Cr–1Mo COPPER COATED LOW ALLOY WIRE FOR CREEP RESISTANCE

CLASSIFICATION : EN ISO 21952-A AWS A/SFA 5.28 APPROVALS :


Automig 90S-B3: G CrMo2Si ER90S-B3 IBR
Tigfil 90S-B3: W CrMo2Si ER90S-B3 IBR/NPCIL/BHEL
KEY FEATURES :
• Copper coated low alloy steel solid filler wire & rod • Typical 2.25 Cr-1 Mo weld deposit
• Uniform copper coating • Superior strength and toughness after PWHT
• Deposit notch free welds with excellent mechanical • Radiographic quality weld
properties
GMAW: DCEP
WELDING POSITION :
GTAW: DCEN
Shielding Gas Gas Flow Rate, LPM Stickout, mm
GMAW: Ar/1-5O2 15-22 10-20
GTAW: Ar 10-15 -
TYPICAL APPLICATIONS :
• Welding of 2.25Cr-0.5Mo and 2.25Cr-1Mo type • Joining of P5A materials
creep resistant steels • Cr-Mo and Cr-Mo-V bearing steels for high
• Joining ASTM A 335 Gr.P22, A 387 Gr.22 materials temperature applications
• Refineries, Petrochemicals and fertilizers plant • Suitable for 12CrMo9-10, 10CrSiMoV7 German steels
STORAGE / HANDLING :
Keep dry and follow handling instructions mentioned on the box
CHEMICAL COMPOSITION OF BARE SOLID WIRE, Wt% :
C Mn Si Cr Mo Cu* S P
Specification 0.07-0.12 0.40-0.70 0.40-0.70 2.30-2.70 0.90-1.20 0.35 max 0.025 max 0.025 max
* Including Cu in the coating
MECHANICAL PROPERTIES OF ALL WELD METAL :
Condition UTS, MPa YS at 0.2% offset, MPa EL%
Specification PWHT: 690°C for 1 Hr 620 min 540 min 17 min
Mechanical properties will vary with the type of shielding gas used.
CREEP TEST DATA FOR TIGFIL 90S-B3:
Temperature,OC Stress, MPa Duration, Hrs Strain% after 1000 Hrs
550 140 1000 0.92
PWHT: 690°C for 1 Hr
600 80 1000 1.28

PACKING DATA :
Ø, mm Kg/Spool
Automig 90S-B3 1.2 15
1.6 15
Ø x L, mm Primary Box, Kg No. of Primary Boxes Net Wt. of Carton, Kg
1.6 x 1000 5 4 20
Tigfil 90S-B3
2.0 x 1000 5 4 20
2.5 x 1000 5 4 20
EQUIVALENT : SMAW Electrode: Cromoten C

PASSION FOR WELDING SINCE 1951 [Link]

15

You might also like