FILTRO DE CASCARA DE NUEZ 1
EQUIPO FABRICADO POR METALMECANICA MENDEZ SAS
PV Elite 2019 Licensee: SPLM Licensed User
FileName : tapa 1
Nozzle Calcs. : N4 PSV Nozl: 18 12:41pm Jul 25,2020
INPUT VALUES, Nozzle Description: N4 PSV From : 30
Type of Element Connected to the Shell : Nozzle
FILTRO DE CASCARA DE NUEZ 2
EQUIPO FABRICADO POR METALMECANICA MENDEZ SAS
PV Elite 2019 Licensee: SPLM Licensed User
FileName : tapa 1
Nozzle Calcs. : N4 PSV Nozl: 18 12:41pm Jul 25,2020
The Pressure Design option was Design Pressure + static head.
Nozzle Sketch (may not represent actual weld type/configuration)
Insert/Set-in Nozzle No Pad, with Inside projection
FILTRO DE CASCARA DE NUEZ 3
EQUIPO FABRICADO POR METALMECANICA MENDEZ SAS
PV Elite 2019 Licensee: SPLM Licensed User
FileName : tapa 1
Nozzle Calcs. : N4 PSV Nozl: 18 12:41pm Jul 25,2020
Note : Checking Nozzle in the Meridional direction.
Reinforcement CALCULATION, Description: N4 PSV
ASME Code, Section VIII, Div. 1, 2015, UG-37 to UG-45
Nozzle input data check completed without errors.
Reqd thk per UG-37(a)of Torispherical Head, Tr [Int. Press]
Reqd thk per UG-37(a)of Torispherical Head, Tr [Mapnc]
Reqd thk per UG-37(a)of Nozzle Wall, Trn [Int. Press]
Reqd thk per UG-37(a)of Nozzle Wall, Trn [Mapnc]
UG-40, Limits of Reinforcement : [Internal Pressure]
FILTRO DE CASCARA DE NUEZ 4
EQUIPO FABRICADO POR METALMECANICA MENDEZ SAS
PV Elite 2019 Licensee: SPLM Licensed User
FileName : tapa 1
Nozzle Calcs. : N4 PSV Nozl: 18 12:41pm Jul 25,2020
UG-40, Limits of Reinforcement : [Mapnc]
Weld Strength Reduction Factor [fr1]:
Weld Strength Reduction Factor [fr2]:
Weld Strength Reduction Factor [fr3]:
FILTRO DE CASCARA DE NUEZ 5
EQUIPO FABRICADO POR METALMECANICA MENDEZ SAS
PV Elite 2019 Licensee: SPLM Licensed User
FileName : tapa 1
Nozzle Calcs. : N4 PSV Nozl: 18 12:41pm Jul 25,2020
Results of Nozzle Reinforcement Area Calculations: (in²)
The Internal Pressure Case Governs the Analysis.
The area available without a pad is Sufficient.
Area Required [A]:
Reinforcement Areas per Figure UG-37.1
Area Available in Shell [A1]:
Area Available in Nozzle Projecting Outward [A2]:
²
FILTRO DE CASCARA DE NUEZ 6
EQUIPO FABRICADO POR METALMECANICA MENDEZ SAS
PV Elite 2019 Licensee: SPLM Licensed User
FileName : tapa 1
Nozzle Calcs. : N4 PSV Nozl: 18 12:41pm Jul 25,2020
Note: See ASME VIII-1 2011(a) Appendix L, L-7.7.7(b) for more information.
Area Available in Inward Nozzle [A3]:
Area Available in Inward Weld + Outward Weld [A41 + A43]:
² ²
² ²
Nozzle Junction Minimum Design Metal Temperature (MDMT) Calculations:
MDMT of the Nozzle Neck to Flange Weld, Curve: B
Govrn. thk, tg = 0.295 , tr = 0.010 , c = 0.1250 in. , E* = 1.00
Stress Ratio = tr * (E*)/(tg - c) = 0.060 , Temp. Reduction = 140 °F
MDMT of Nozzle-Shell/Head Weld for the Nozzle (UCS-66(a)1(b)), Curve: B
Govrn. thk, tg = 0.295 , tr = 0.010 , c = 0.1250 in. , E* = 1.00
Stress Ratio = tr * (E*)/(tg - c) = 0.060 , Temp. Reduction = 140 °F
°
FILTRO DE CASCARA DE NUEZ 7
EQUIPO FABRICADO POR METALMECANICA MENDEZ SAS
PV Elite 2019 Licensee: SPLM Licensed User
FileName : tapa 1
Nozzle Calcs. : N4 PSV Nozl: 18 12:41pm Jul 25,2020
ANSI Flange MDMT including Temperature reduction per UCS-66.1:
Where the Stress Reduction Ratio per UCS-66(b)(1)(b) is :
Note: Using the minimum value from (b)(1)(b) and (b)(1)(c) above
as the calculated nozzle flange MDMT.
Weld Size Calculations, Description: N4 PSV
Results Per UW-16.1:
Maximum Allowable Pressure for this Nozzle at this Location:
Note: The MAWP of this junction was limited by the parent Shell/Head.
Note: The M.A.P.(NC) of this junction was limited by the parent Shell/Head.
Note : Checking Nozzle in the Latitudinal direction.
FILTRO DE CASCARA DE NUEZ 8
EQUIPO FABRICADO POR METALMECANICA MENDEZ SAS
PV Elite 2019 Licensee: SPLM Licensed User
FileName : tapa 1
Nozzle Calcs. : N4 PSV Nozl: 18 12:41pm Jul 25,2020
Reinforcement CALCULATION, Description: N4 PSV
ASME Code, Section VIII, Div. 1, 2015, UG-37 to UG-45
Nozzle input data check completed without errors.
Reqd thk per UG-37(a)of Torispherical Head, Tr [Int. Press]
Reqd thk per UG-37(a)of Torispherical Head, Tr [Mapnc]
Reqd thk per UG-37(a)of Nozzle Wall, Trn [Int. Press]
Reqd thk per UG-37(a)of Nozzle Wall, Trn [Mapnc]
UG-40, Limits of Reinforcement : [Internal Pressure]
FILTRO DE CASCARA DE NUEZ 9
EQUIPO FABRICADO POR METALMECANICA MENDEZ SAS
PV Elite 2019 Licensee: SPLM Licensed User
FileName : tapa 1
Nozzle Calcs. : N4 PSV Nozl: 18 12:41pm Jul 25,2020
UG-40, Limits of Reinforcement : [Mapnc]
Results of Nozzle Reinforcement Area Calculations: (in²)
The Internal Pressure Case Governs the Analysis.
The area available without a pad is Sufficient.
Area Required [A]:
Reinforcement Areas per Figure UG-37.1
FILTRO DE CASCARA DE NUEZ 10
EQUIPO FABRICADO POR METALMECANICA MENDEZ SAS
PV Elite 2019 Licensee: SPLM Licensed User
FileName : tapa 1
Nozzle Calcs. : N4 PSV Nozl: 18 12:41pm Jul 25,2020
Area Available in Shell [A1]:
Area Available in Nozzle Projecting Outward [A2]:
Area Available in Inward Nozzle [A3]:
Area Available in Inward Weld + Outward Weld [A41 + A43]:
² ²
² ²
UG-45 Minimum Nozzle Neck Thickness Requirement: [Int. Press.]
Determine Nozzle Thickness candidate [tb]:
FILTRO DE CASCARA DE NUEZ 11
EQUIPO FABRICADO POR METALMECANICA MENDEZ SAS
PV Elite 2019 Licensee: SPLM Licensed User
FileName : tapa 1
Nozzle Calcs. : N4 PSV Nozl: 18 12:41pm Jul 25,2020
Minimum Wall Thickness of Nozzle Necks [tUG-45]:
Weld Size Calculations, Description: N4 PSV
Results Per UW-16.1:
Maximum Allowable Pressure for this Nozzle at this Location:
Note: The M.A.P.(NC) of this junction was limited by the parent Shell/Head.
The Drop for this Nozzle is : 0.7258 in.
The Cut Length for this Nozzle is, Drop + Ho + H + T : 14.6186 in.
PV Elite is a trademark of Intergraph CADWorx & Analysis Solutions, Inc. 2019
