Scribd
Upload
307 views1 page

Triple-Band Antenna Specifications

This document provides specifications for a triple-band panel antenna covering 790-960 MHz, 1710-1880 MHz, and 1920-2170 MHz frequency ranges. The antenna supports dual polarization across all bands with a 65 degree half-power beamwidth. Additional details include gain levels between 16.8-18.2 dBi across the bands, electrical tilt adjustment between 0-7 degrees, isolation of over 30 dB between bands and systems, input power handling of up to 1000W total, and mechanical dimensions of 2533x261x146mm.

Uploaded by

Saif Haider
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
307 views1 page

Triple-Band Antenna Specifications

This document provides specifications for a triple-band panel antenna covering 790-960 MHz, 1710-1880 MHz, and 1920-2170 MHz frequency ranges. The antenna supports dual polarization across all bands with a 65 degree half-power beamwidth. Additional details include gain levels between 16.8-18.2 dBi across the bands, electrical tilt adjustment between 0-7 degrees, isolation of over 30 dB between bands and systems, input power handling of up to 1000W total, and mechanical dimensions of 2533x261x146mm.

Uploaded by

Saif Haider
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Triple-band Panel 790 – 960 1710 –1880 1920 –2170

Dual Polarization X X X
Half-power Beam Width 65° 65° 65°

XXXPol Panel 790–960/1710–1880/1920–2170 65°/ 65°/65° 17.5/18/18dBi 0°–7°/0°–6°/0°–6°T


s
clamp d
Type No. 742272V03 in clu d e
Frequency range 790–960 1710 –1880 1920 –2170
790 – 862 MHz 880 – 960 MHz 1710 – 1880 MHz 1920 – 2170 MHz
Polarization +45°, –45° +45°, –45° +45°, –45° +45°, –45°
Gain (dBi) 16.9 ... 16.9 ... 16.8 17.3 ... 17.4 ... 17.2 17.8 ... 18.0 ... 17.8 17.9 ... 18.2 ... 17.9
Tilt 0° ... 3° ... 7° 0° ... 3° ... 7° 0° ... 3° ... 6° 0° ... 3° ... 6°
Horizontal Pattern:
Half-power beam width 68° 65° 65° 61°
Front-to-back ratio, copolar > 30 dB > 30 dB > 30 dB > 30 dB
Cross polar ratio Typically: Typically: Typically: Typically:
Maindirection 0° 30 dB 30 dB 25 dB 25 dB
Sector ±60° > 10 dB > 10 dB > 10 dB > 10 dB
Tracking, Avg. 1.0 dB 0.5 dB 0.5 dB
Squint ±2.5° ±2.5° ±2.5°
Vertical Pattern:
Half-power beam width 8.0° 7.2° 5.0° 4.6°
Electrical tilt, contin. adjust. 0°– 7° 0°– 6° 0°– 6°
Sidelobe suppression for first 0° ... 4° ... 7° T 0° ... 4° ... 7° T 0° ... 3° ... 6° T 0° ... 3° ... 6° T
sidelobe above main beam avg. ≥ 17 ... 17 ... 15 dB ≥ 18 ... 17 ... 15 dB ≥ 18 ... 17 ... 15 dB ≥ 18 ... 18 ... 16 dB
VSWR < 1.5 < 1.5 < 1.5
Isolation: Intrasystem > 30 dB > 30 dB > 30 dB
Isolation: Intersystem Typically: > 50 dB (790 – 960 // 1710 – 1880 MHz)11
Typically: > 50 dB (790 – 960 // 1920 – 2170 MHz)11
> 30 dB (1710 – 1880 // 1920 – 2170 MHz)
Intermodulation IM3 < –150 dBc < –150 dBc < –150 dBc
(2 x 43 dBm carrier)
Max. power per input 500 W* 250 W* 250 W*
Total power 1000 W* 500 W* 500 W*
Input 6x 7-16 female (long neck)
Connector position Bottom
Adjustment mechanism 3x, Position bottom continuously adjustable
Wind load (at 150 km/h) Frontal / lateral / rearside: 1160 / 500 / 1210 N
Height/width/depth 2533 / 261 / 146 mm
Category of mounting hardware H (Heavy)
Weight 29 kg / 31 kg (clamps incl.)
1800/2000/2600
800/900 –

Scope of supply Panel and 2 units of clamps for 42 – 115 mm diameter


XXXPol

* (at 50 °C ambient temperature)

1710 –1880 1710–1880


–45° +45°

790 – 960 790 – 960 1920–2170 1920–2170


–45° +45° –45° +45°

7-16 7-16 7-16 7-16 7-16 7-16

122 For more information about additional mounting accessories please refer to page 186

You might also like