Acoustical Tests

Noteworthy Projects

[Link]/arch
Over our 45-plus year history, thousands of Kinetics Model RIM systems have been installed successfully under
2’’ Topping Slab
Precast Concrete 14’’ Tee
STC 54 IIC 24 mechanical equipment rooms, gymnasium floors, rooftops, aerobic and fitness centers, theater and cinema venues,
Roll-out Floor Isolation System
recording and broadcasting studios, private residences, loading docks, gun ranges, and bowling centers around the Model RIM (Roll-out Isolation Material) System
world. Below, we've listed just a few of our noteworthy projects.
Kinetics Test Number A2-a

• University of Illinois Recreation Center • Gene Siskel Film Center Theater non-structural components, such as ductwork and
• Boston University Arena Mechanical Room • Navy Pier USO Lounge piping. Accordingly, airborne and impact noise
4’’Concrete Slab
1/2’’ Plywood • 8th & I Marine Barracks Music Rooms • Lucky Strike Lanes at Gallery Place transmissions are greatly reduced between the
STC 73 IIC 70
Kinetics® RIM L-2-12 • Florida State University Communications Studios • First Baptist Church of West Palm Beach room incorporating the floating floor system and
2’’ Topping Slab
• Cincinnati State Audio Studio and Control Room Gymnasium and Fellowship Hall other parts of the building. Additionally, floating floor
Precast Concrete 14’’ Tee
• CNN Studios • LA Fitness Centers systems are often used to prevent transmission of
Kinetics Test Number A2-b and A3 • WWF Entertainment Studios • Georgia International Convention Center Rooftop vibration and airborne noise from entering into the
• ESPN Studios • AMC Easton 30 at Easton Town Center space in which the floating floor is installed. One
• University of Akron Student Union Ballroom • Muvico Centro Ybor 20 Multiplex Theater such application would be the construction of
4’’ Concrete Slab • Naismith Basketball Hall of Fame Office • LSU Music and Arts Building Percussion Studios floating floors for a multiplex theater adjacent to a
5/8’’ Plywood and Projection Room • Peabody Institute Rehearsal Hall and railway. Kinetics Noise Control floating floor systems
Kinetics® RIM Q-2-12 FSTC 72 FIIC 68
4-7/8’’ Concrete Slab with 17’’ Tee • Hibbing College Gun Range Percussion Room Renovation offers the largest variety of isolation mounts to fit
Drop in Acoustical Ceiling • Ramsey County Law Center Gun Range • Brophy College Preparatory Gymnasium specific applications. These include resilient
• National Underground Railroad Freedom Center • University of the Ozarks Tutoring Rooms pre-compressed fiberglass pads, steel springs, and

Kinetics Test Number A11

Mechanical Rooms • IU Professional Medical Building Mechanical Room Floor Isolation Theory: neoprene or natural rubber pads. Acoustical test
data for Sound Transmission Class (STC) and
• Soldier Field-Chicago Bears Stadium • Cass Technical High School Mechanical
Floor isolation systems are incorporated into building Impact Insulation Class (IIC) are available for
Renovation Rooftop Equipment Rooms
4’’ Concrete Slab design to minimize floor impact noise and airborne several types of isolated floor/ceiling assemblies
1/2’’ Plywood
• Elder Shirt Lofts Condominums • Brown Camp Loft Condominiums
STC 68 IIC 60 sound transmissions. A “floated” floor (or rooftop) is documenting system performance.
Kinetics® KIP-22-Q2 Isolation Pads
6’’ Concrete Slab supported by resilient mounts installed on the
Kinetics Test Number A13-a Call us to discuss your requirements for noise control, and learn how to employ the versatile, proven Model RIM structural floor or rooftop. The design of an effective
System to solve your noise problems.
4’’ Concrete Slab
isolation system is dependent on several factors Application:
1/2’’ Plywood including:
Kinetics® RIM-Q-2-16 Isolation System
STC 72 IIC 62 Kinetics Noise Control’s premier rollout system
6’’ Concrete Slab 1.) Stiffness and mass of the structural floor,
easily creates an airspace of 1 to 4 inches and
Kinetics Test Number A13-b 2.) Isolation mount natural frequency and
incorporates a high-performance resilient decoupler.
damping characteristics,
1’’ Oak Hardwood Floor The isolation material with Model KIP isolators
3’’ Subfloor FIIC 15 3.) Airspace height and venting,
Kinetics Test Number A14-a
Essentials: 4.) Mass and composition of the floated floor,
selected and spaced according to design criteria
3/4’’ Oak Hardwood Floor offers major advantages over other systems.

Model RIM
3/4’’ Sleepers • Proven effectiveness over the lifetime of an installation. 5.) Sound absorption in the airspace
1-1/2’’ Gypcrete United States Canada
Installation labor is substantially reduced, as it is
FSTC 50 FIIC 45 • Quick installation time, especially compared to “jack-up” methods. 6.) Control of sound flanking paths.
2 Layers 1/2’’ OSB 6300 Irelan Place 1720 Meyerside Drive easier to roll out batting with pre-spaced isolators
1'' Kinetics® RIM L-1-16 • Constant System natural frequency across a wide load range. P.O. Box 655 Mississauga, Ontario
Kinetics Test Number A14-b
Creating airspace between the structural and isolated versus measuring for and placing individual isolation
1’’ Oak Hardwood Floor • Flexible capacities allow design for any load; from light wood Dublin, Ohio 43017 L5T 1A3
3’’ Subfloor Phone: 614-889-0480 Phone: 905-670-4922 floors while decoupling the two floors with the mounts. This feature also ensures that the system
floors to heavy mechanical equipment rooms.
Fax: 614-889-0540 Fax: 905-670-1698 appropriate resilient mount effectively controls noise will reach the high levels of expected performance.
3/8’’ Plywood • When used in conjunction with ceiling and wall separation products, [Link]
2 Layers 3/4’’ Plywood archsales@[Link] transmission. Maximum effectiveness of floating floor This system is designed to meet requirements for;
STC 66 IIC 63 Model RIM is an essential component of “room-within-a-room”
Kinetics® RIM I-2-16 composite construction is achieved when the finished load capacity, natural frequency/pad deflection, and
Kinetics Noise Control, Inc. is continually upgrading
6'' Concrete Slab sound isolation construction.
Kinetics Test Number A15-a the quality of our products. We reserve the right to floor is fully isolated from the building structure and acoustical performance.
make changes to this and all products without notice.
3/8’’ Plywood
3/4’’ Plywood
2 Layers 5/8’’ Drywall
3/4’’ Plywood
STC 71 IIC 64
Kinetics® RIM I-2-16
6'' Concrete Slab Kinetics Test Number A15-b Download Model RIM information including three-part specification, installation guidelines, and typical installation drawings at
[Link]/arch/[Link]. Call the factory at 800-959-1229 if needing additional information; ask for Architectural Kinetics Architectural Sound Isolation
sales. Purchase Model RIM and accessories through your local sales representative ([Link]/[Link]).
RIM 5/06
Installation Sequence: Concrete Floated Floor: Wood Floated Floor: Installation Sequence:

Benefits: Benefits:
• STC 73/IIC 70 Tests A2-b and A3 • STC 66/IIC 63 Test A15-a
• Greater load capacity at a lower cost • Can be designed for any load range
• Can be designed for any load range • Easy to create 1”, 2”, 3”, and 4” airspaces
• Easy to create 1”, 2”, 3”, and 4” airspaces • Fast, simple, inexpensive installation
• Fast, simple, inexpensive installation • Optional channels or nailers can be used for stiffness
• Factory installation and supervision available and increased airspace
• Model RIM System successfully installed for over 45 years
Model RIM System wood floated floors are ideally suited for
• Natural Frequency constant over a wide load range
dance studios, loft style condominiums, recording studios,
1) Place Perimeter Board (Model PIB) Successfully installed for years under concrete floors found in and any other application where high performance noise 1) Place Perimeter Board (Model SRP)
mechanical rooms, studios, ballrooms, and theaters, Kinetics control is required and the structure cannot support the
Noise Control’s Model RIM System remains the leading formwork weight of an isolated concrete slab. A Model RIM System
technique for isolating concrete slabs in any floor or roof system floated wood floor surpasses performance of continuous
requiring sound abatement. An original, Model RIM System underlayments due to the airspace and lower natural
consistently provides continuous, high-performing noise control frequency created by the Model KIP pads spaced at 12-,
for critical applications. Our pour-in-place floor isolation system 16-, or 24-inches on center. Model RIM System can be
incorporates all critical components needed in a top-performing supplied to fit any load condition. Installation is easy and
noise control system including: Model KIP isolators fixed in fiber- quick due to the pre-spaced Model KIP pads. Moreover, the
glass batting, Model PIB Perimeter Isolation Board, spray natural frequency remains relatively constant over a wide
adhesive, plywood junction plates, polyethylene sheeting and range of loads, which is common in wood built construction
tape, and resilient, non-hardening perimeter sealant. Model KIP (i.e. a piano in a music studio). Kinetics Noise Control
2) Roll-out Model RIM and cut isolators spaced 12-, 16-, or 24-inches on center are available in invites comparison between our Model RIM System wood 2) Roll-out Model RIM
as needed different densities allowing for a multitude of load ranges under a floor and any other product available.
single slab while maintaining a constant natural frequency.
Factory-trained sales representatives can help designers Installation of Model RIM System for a wood floated floor is
determine which system to use based on dead and live load similar to that of the isolated concrete slab. Starting with a
requirements. Kinetics Engineering Group will provide design level subfloor, a 3/8” thick strip of Model SRP (perimeter
submittals. The fiberglass batting with Model KIP isolators pre- isolation board) is adhered to all non-isolated walls (the
spaced is rolled-up and delivered in poly bags along with the height of Model SRP is dictated by the height of the finished
specified accessories to the jobsite. floor). The rolls of batting with secured pads are rolled out
into place. If heavy point loads exist, individual Model KIP
Installation of Model RIM is quick and easy. Decouple the area pads are then placed per submittal drawings. Typically, two
being treated by installing Perimeter Isolation Board (Model PIB) layers of ¾” plywood are laid (seams staggered) over the
around the perimeter of the room. Additionally, Model PIB is used isolation pads, and the finished floor is installed according
as a resilient break against any other non-isolated elements such to the manufacture’s instructions. Where extra noise control
3) Secure junction plates on plywood 3) Build-up isolated subfloor
pouring form as curbs, drains, ductwork, adjacent floors, pipe, and walls. The is required, layers of gypsum board can be sandwiched
fiberglass batt with pre-spaced isolation pads is then rolled out between the two layers of ¾” plywood. This adds mass, an
over the structural floor. A pouring form is created by placing ply- essential requirement to effective noise control – compare
wood on top of the isolators, and is held together using junction sound test A-15-a and A-15-b. The installation is completed
plates and screws. Two layers of 6-mil poly overlapped and taped by applying acoustical caulking to the top of the Model SRP
at the seams cover the pouring form as temporary waterproofing. board.
Concrete reinforcement is installed and then concrete poured in
place. As dictated by the designer, trades can move about the
floor to complete work in the space without the concrete having
been cured to full strength – the floor is already positioned at final
design elevation. There is no worry about keeping the floor clear
for a second visit to “lift” the slab by an installation crew. The final
installation step of the Model RIM System requires removing the
4) Cover with poly layer. Ready to 4) Apply finish floor per
install reinforcement and pour concrete. Model PIB tear strip and sealing the perimeter of the floating floor manufacturer instructions
with resilient, non-hardening caulk.
Installation Sequence: Concrete Floated Floor: Wood Floated Floor: Installation Sequence:

Benefits: Benefits:
• STC 73/IIC 70 Tests A2-b and A3 • STC 66/IIC 63 Test A15-a
• Greater load capacity at a lower cost • Can be designed for any load range
• Can be designed for any load range • Easy to create 1”, 2”, 3”, and 4” airspaces
• Easy to create 1”, 2”, 3”, and 4” airspaces • Fast, simple, inexpensive installation
• Fast, simple, inexpensive installation • Optional channels or nailers can be used for stiffness
• Factory installation and supervision available and increased airspace
• Model RIM System successfully installed for over 45 years
Model RIM System wood floated floors are ideally suited for
• Natural Frequency constant over a wide load range
dance studios, loft style condominiums, recording studios,
1) Place Perimeter Board (Model PIB) Successfully installed for years under concrete floors found in and any other application where high performance noise 1) Place Perimeter Board (Model SRP)
mechanical rooms, studios, ballrooms, and theaters, Kinetics control is required and the structure cannot support the
Noise Control’s Model RIM System remains the leading formwork weight of an isolated concrete slab. A Model RIM System
technique for isolating concrete slabs in any floor or roof system floated wood floor surpasses performance of continuous
requiring sound abatement. An original, Model RIM System underlayments due to the airspace and lower natural
consistently provides continuous, high-performing noise control frequency created by the Model KIP pads spaced at 12-,
for critical applications. Our pour-in-place floor isolation system 16-, or 24-inches on center. Model RIM System can be
incorporates all critical components needed in a top-performing supplied to fit any load condition. Installation is easy and
noise control system including: Model KIP isolators fixed in fiber- quick due to the pre-spaced Model KIP pads. Moreover, the
glass batting, Model PIB Perimeter Isolation Board, spray natural frequency remains relatively constant over a wide
adhesive, plywood junction plates, polyethylene sheeting and range of loads, which is common in wood built construction
tape, and resilient, non-hardening perimeter sealant. Model KIP (i.e. a piano in a music studio). Kinetics Noise Control
2) Roll-out Model RIM and cut isolators spaced 12-, 16-, or 24-inches on center are available in invites comparison between our Model RIM System wood 2) Roll-out Model RIM
as needed different densities allowing for a multitude of load ranges under a floor and any other product available.
single slab while maintaining a constant natural frequency.
Factory-trained sales representatives can help designers Installation of Model RIM System for a wood floated floor is
determine which system to use based on dead and live load similar to that of the isolated concrete slab. Starting with a
requirements. Kinetics Engineering Group will provide design level subfloor, a 3/8” thick strip of Model SRP (perimeter
submittals. The fiberglass batting with Model KIP isolators pre- isolation board) is adhered to all non-isolated walls (the
spaced is rolled-up and delivered in poly bags along with the height of Model SRP is dictated by the height of the finished
specified accessories to the jobsite. floor). The rolls of batting with secured pads are rolled out
into place. If heavy point loads exist, individual Model KIP
Installation of Model RIM is quick and easy. Decouple the area pads are then placed per submittal drawings. Typically, two
being treated by installing Perimeter Isolation Board (Model PIB) layers of ¾” plywood are laid (seams staggered) over the
around the perimeter of the room. Additionally, Model PIB is used isolation pads, and the finished floor is installed according
as a resilient break against any other non-isolated elements such to the manufacture’s instructions. Where extra noise control
3) Secure junction plates on plywood 3) Build-up isolated subfloor
pouring form as curbs, drains, ductwork, adjacent floors, pipe, and walls. The is required, layers of gypsum board can be sandwiched
fiberglass batt with pre-spaced isolation pads is then rolled out between the two layers of ¾” plywood. This adds mass, an
over the structural floor. A pouring form is created by placing ply- essential requirement to effective noise control – compare
wood on top of the isolators, and is held together using junction sound test A-15-a and A-15-b. The installation is completed
plates and screws. Two layers of 6-mil poly overlapped and taped by applying acoustical caulking to the top of the Model SRP
at the seams cover the pouring form as temporary waterproofing. board.
Concrete reinforcement is installed and then concrete poured in
place. As dictated by the designer, trades can move about the
floor to complete work in the space without the concrete having
been cured to full strength – the floor is already positioned at final
design elevation. There is no worry about keeping the floor clear
for a second visit to “lift” the slab by an installation crew. The final
installation step of the Model RIM System requires removing the
4) Cover with poly layer. Ready to 4) Apply finish floor per
install reinforcement and pour concrete. Model PIB tear strip and sealing the perimeter of the floating floor manufacturer instructions
with resilient, non-hardening caulk.
Acoustical Tests
Noteworthy Projects

[Link]/arch
Over our 45-plus year history, thousands of Kinetics Model RIM systems have been installed successfully under
2’’ Topping Slab
Precast Concrete 14’’ Tee
STC 54 IIC 24 mechanical equipment rooms, gymnasium floors, rooftops, aerobic and fitness centers, theater and cinema venues,
Roll-out Floor Isolation System
recording and broadcasting studios, private residences, loading docks, gun ranges, and bowling centers around the Model RIM (Roll-out Isolation Material) System
world. Below, we've listed just a few of our noteworthy projects.
Kinetics Test Number A2-a

• University of Illinois Recreation Center • Gene Siskel Film Center Theater non-structural components, such as ductwork and
• Boston University Arena Mechanical Room • Navy Pier USO Lounge piping. Accordingly, airborne and impact noise
4’’Concrete Slab
1/2’’ Plywood • 8th & I Marine Barracks Music Rooms • Lucky Strike Lanes at Gallery Place transmissions are greatly reduced between the
STC 73 IIC 70
Kinetics® RIM L-2-12 • Florida State University Communications Studios • First Baptist Church of West Palm Beach room incorporating the floating floor system and
2’’ Topping Slab
• Cincinnati State Audio Studio and Control Room Gymnasium and Fellowship Hall other parts of the building. Additionally, floating floor
Precast Concrete 14’’ Tee
• CNN Studios • LA Fitness Centers systems are often used to prevent transmission of
Kinetics Test Number A2-b and A3 • WWF Entertainment Studios • Georgia International Convention Center Rooftop vibration and airborne noise from entering into the
• ESPN Studios • AMC Easton 30 at Easton Town Center space in which the floating floor is installed. One
• University of Akron Student Union Ballroom • Muvico Centro Ybor 20 Multiplex Theater such application would be the construction of
4’’ Concrete Slab • Naismith Basketball Hall of Fame Office • LSU Music and Arts Building Percussion Studios floating floors for a multiplex theater adjacent to a
5/8’’ Plywood and Projection Room • Peabody Institute Rehearsal Hall and railway. Kinetics Noise Control floating floor systems
Kinetics® RIM Q-2-12 FSTC 72 FIIC 68
4-7/8’’ Concrete Slab with 17’’ Tee • Hibbing College Gun Range Percussion Room Renovation offers the largest variety of isolation mounts to fit
Drop in Acoustical Ceiling • Ramsey County Law Center Gun Range • Brophy College Preparatory Gymnasium specific applications. These include resilient
• National Underground Railroad Freedom Center • University of the Ozarks Tutoring Rooms pre-compressed fiberglass pads, steel springs, and

Kinetics Test Number A11

Mechanical Rooms • IU Professional Medical Building Mechanical Room Floor Isolation Theory: neoprene or natural rubber pads. Acoustical test
data for Sound Transmission Class (STC) and
• Soldier Field-Chicago Bears Stadium • Cass Technical High School Mechanical
Floor isolation systems are incorporated into building Impact Insulation Class (IIC) are available for
Renovation Rooftop Equipment Rooms
4’’ Concrete Slab design to minimize floor impact noise and airborne several types of isolated floor/ceiling assemblies
1/2’’ Plywood
• Elder Shirt Lofts Condominums • Brown Camp Loft Condominiums
STC 68 IIC 60 sound transmissions. A “floated” floor (or rooftop) is documenting system performance.
Kinetics® KIP-22-Q2 Isolation Pads
6’’ Concrete Slab supported by resilient mounts installed on the
Kinetics Test Number A13-a Call us to discuss your requirements for noise control, and learn how to employ the versatile, proven Model RIM structural floor or rooftop. The design of an effective
System to solve your noise problems.
4’’ Concrete Slab
isolation system is dependent on several factors Application:
1/2’’ Plywood including:
Kinetics® RIM-Q-2-16 Isolation System
STC 72 IIC 62 Kinetics Noise Control’s premier rollout system
6’’ Concrete Slab 1.) Stiffness and mass of the structural floor,
easily creates an airspace of 1 to 4 inches and
Kinetics Test Number A13-b 2.) Isolation mount natural frequency and
incorporates a high-performance resilient decoupler.
damping characteristics,
1’’ Oak Hardwood Floor The isolation material with Model KIP isolators
3’’ Subfloor FIIC 15 3.) Airspace height and venting,
Kinetics Test Number A14-a
Essentials: 4.) Mass and composition of the floated floor,
selected and spaced according to design criteria
3/4’’ Oak Hardwood Floor offers major advantages over other systems.

Model RIM
3/4’’ Sleepers • Proven effectiveness over the lifetime of an installation. 5.) Sound absorption in the airspace
1-1/2’’ Gypcrete United States Canada
Installation labor is substantially reduced, as it is
FSTC 50 FIIC 45 • Quick installation time, especially compared to “jack-up” methods. 6.) Control of sound flanking paths.
2 Layers 1/2’’ OSB 6300 Irelan Place 1720 Meyerside Drive easier to roll out batting with pre-spaced isolators
1'' Kinetics® RIM L-1-16 • Constant System natural frequency across a wide load range. P.O. Box 655 Mississauga, Ontario
Kinetics Test Number A14-b
Creating airspace between the structural and isolated versus measuring for and placing individual isolation
1’’ Oak Hardwood Floor • Flexible capacities allow design for any load; from light wood Dublin, Ohio 43017 L5T 1A3
3’’ Subfloor Phone: 614-889-0480 Phone: 905-670-4922 floors while decoupling the two floors with the mounts. This feature also ensures that the system
floors to heavy mechanical equipment rooms.
Fax: 614-889-0540 Fax: 905-670-1698 appropriate resilient mount effectively controls noise will reach the high levels of expected performance.
3/8’’ Plywood • When used in conjunction with ceiling and wall separation products, [Link]
2 Layers 3/4’’ Plywood archsales@[Link] transmission. Maximum effectiveness of floating floor This system is designed to meet requirements for;
STC 66 IIC 63 Model RIM is an essential component of “room-within-a-room”
Kinetics® RIM I-2-16 composite construction is achieved when the finished load capacity, natural frequency/pad deflection, and
Kinetics Noise Control, Inc. is continually upgrading
6'' Concrete Slab sound isolation construction.
Kinetics Test Number A15-a the quality of our products. We reserve the right to floor is fully isolated from the building structure and acoustical performance.
make changes to this and all products without notice.
3/8’’ Plywood
3/4’’ Plywood
2 Layers 5/8’’ Drywall
3/4’’ Plywood
STC 71 IIC 64
Kinetics® RIM I-2-16
6'' Concrete Slab Kinetics Test Number A15-b Download Model RIM information including three-part specification, installation guidelines, and typical installation drawings at
[Link]/arch/[Link]. Call the factory at 800-959-1229 if needing additional information; ask for Architectural Kinetics Architectural Sound Isolation
sales. Purchase Model RIM and accessories through your local sales representative ([Link]/[Link]).
RIM 5/06
Acoustical Tests
Noteworthy Projects

[Link]/arch
Over our 45-plus year history, thousands of Kinetics Model RIM systems have been installed successfully under
2’’ Topping Slab
Precast Concrete 14’’ Tee
STC 54 IIC 24 mechanical equipment rooms, gymnasium floors, rooftops, aerobic and fitness centers, theater and cinema venues,
Roll-out Floor Isolation System
recording and broadcasting studios, private residences, loading docks, gun ranges, and bowling centers around the Model RIM (Roll-out Isolation Material) System
world. Below, we've listed just a few of our noteworthy projects.
Kinetics Test Number A2-a

• University of Illinois Recreation Center • Gene Siskel Film Center Theater non-structural components, such as ductwork and
• Boston University Arena Mechanical Room • Navy Pier USO Lounge piping. Accordingly, airborne and impact noise
4’’Concrete Slab
1/2’’ Plywood • 8th & I Marine Barracks Music Rooms • Lucky Strike Lanes at Gallery Place transmissions are greatly reduced between the
STC 73 IIC 70
Kinetics® RIM L-2-12 • Florida State University Communications Studios • First Baptist Church of West Palm Beach room incorporating the floating floor system and
2’’ Topping Slab
• Cincinnati State Audio Studio and Control Room Gymnasium and Fellowship Hall other parts of the building. Additionally, floating floor
Precast Concrete 14’’ Tee
• CNN Studios • LA Fitness Centers systems are often used to prevent transmission of
Kinetics Test Number A2-b and A3 • WWF Entertainment Studios • Georgia International Convention Center Rooftop vibration and airborne noise from entering into the
• ESPN Studios • AMC Easton 30 at Easton Town Center space in which the floating floor is installed. One
• University of Akron Student Union Ballroom • Muvico Centro Ybor 20 Multiplex Theater such application would be the construction of
4’’ Concrete Slab • Naismith Basketball Hall of Fame Office • LSU Music and Arts Building Percussion Studios floating floors for a multiplex theater adjacent to a
5/8’’ Plywood and Projection Room • Peabody Institute Rehearsal Hall and railway. Kinetics Noise Control floating floor systems
Kinetics® RIM Q-2-12 FSTC 72 FIIC 68
4-7/8’’ Concrete Slab with 17’’ Tee • Hibbing College Gun Range Percussion Room Renovation offers the largest variety of isolation mounts to fit
Drop in Acoustical Ceiling • Ramsey County Law Center Gun Range • Brophy College Preparatory Gymnasium specific applications. These include resilient
• National Underground Railroad Freedom Center • University of the Ozarks Tutoring Rooms pre-compressed fiberglass pads, steel springs, and

Kinetics Test Number A11

Mechanical Rooms • IU Professional Medical Building Mechanical Room Floor Isolation Theory: neoprene or natural rubber pads. Acoustical test
data for Sound Transmission Class (STC) and
• Soldier Field-Chicago Bears Stadium • Cass Technical High School Mechanical
Floor isolation systems are incorporated into building Impact Insulation Class (IIC) are available for
Renovation Rooftop Equipment Rooms
4’’ Concrete Slab design to minimize floor impact noise and airborne several types of isolated floor/ceiling assemblies
1/2’’ Plywood
• Elder Shirt Lofts Condominums • Brown Camp Loft Condominiums
STC 68 IIC 60 sound transmissions. A “floated” floor (or rooftop) is documenting system performance.
Kinetics® KIP-22-Q2 Isolation Pads
6’’ Concrete Slab supported by resilient mounts installed on the
Kinetics Test Number A13-a Call us to discuss your requirements for noise control, and learn how to employ the versatile, proven Model RIM structural floor or rooftop. The design of an effective
System to solve your noise problems.
4’’ Concrete Slab
isolation system is dependent on several factors Application:
1/2’’ Plywood including:
Kinetics® RIM-Q-2-16 Isolation System
STC 72 IIC 62 Kinetics Noise Control’s premier rollout system
6’’ Concrete Slab 1.) Stiffness and mass of the structural floor,
easily creates an airspace of 1 to 4 inches and
Kinetics Test Number A13-b 2.) Isolation mount natural frequency and
incorporates a high-performance resilient decoupler.
damping characteristics,
1’’ Oak Hardwood Floor The isolation material with Model KIP isolators
3’’ Subfloor FIIC 15 3.) Airspace height and venting,
Kinetics Test Number A14-a
Essentials: 4.) Mass and composition of the floated floor,
selected and spaced according to design criteria
3/4’’ Oak Hardwood Floor offers major advantages over other systems.

Model RIM
3/4’’ Sleepers • Proven effectiveness over the lifetime of an installation. 5.) Sound absorption in the airspace
1-1/2’’ Gypcrete United States Canada
Installation labor is substantially reduced, as it is
FSTC 50 FIIC 45 • Quick installation time, especially compared to “jack-up” methods. 6.) Control of sound flanking paths.
2 Layers 1/2’’ OSB 6300 Irelan Place 1720 Meyerside Drive easier to roll out batting with pre-spaced isolators
1'' Kinetics® RIM L-1-16 • Constant System natural frequency across a wide load range. P.O. Box 655 Mississauga, Ontario
Kinetics Test Number A14-b
Creating airspace between the structural and isolated versus measuring for and placing individual isolation
1’’ Oak Hardwood Floor • Flexible capacities allow design for any load; from light wood Dublin, Ohio 43017 L5T 1A3
3’’ Subfloor Phone: 614-889-0480 Phone: 905-670-4922 floors while decoupling the two floors with the mounts. This feature also ensures that the system
floors to heavy mechanical equipment rooms.
Fax: 614-889-0540 Fax: 905-670-1698 appropriate resilient mount effectively controls noise will reach the high levels of expected performance.
3/8’’ Plywood • When used in conjunction with ceiling and wall separation products, [Link]
2 Layers 3/4’’ Plywood archsales@[Link] transmission. Maximum effectiveness of floating floor This system is designed to meet requirements for;
STC 66 IIC 63 Model RIM is an essential component of “room-within-a-room”
Kinetics® RIM I-2-16 composite construction is achieved when the finished load capacity, natural frequency/pad deflection, and
Kinetics Noise Control, Inc. is continually upgrading
6'' Concrete Slab sound isolation construction.
Kinetics Test Number A15-a the quality of our products. We reserve the right to floor is fully isolated from the building structure and acoustical performance.
make changes to this and all products without notice.
3/8’’ Plywood
3/4’’ Plywood
2 Layers 5/8’’ Drywall
3/4’’ Plywood
STC 71 IIC 64
Kinetics® RIM I-2-16
6'' Concrete Slab Kinetics Test Number A15-b Download Model RIM information including three-part specification, installation guidelines, and typical installation drawings at
[Link]/arch/[Link]. Call the factory at 800-959-1229 if needing additional information; ask for Architectural Kinetics Architectural Sound Isolation
sales. Purchase Model RIM and accessories through your local sales representative ([Link]/[Link]).
RIM 5/06