Scribd
Upload
68 views2 pages

Work Method Statement FOR Application of Polymer Modified Structural Repair Motar

The document outlines the work method for applying a polymer modified structural repair mortar. It describes the scope of work, equipment and manpower needed, and the method of application. The method involves surface preparation, priming with an acrylic bonding agent, applying the mortar with a wood float and steel trowel to a thickness of 6mm, and mixing the mortar with water in a ratio of 2.5-3 liters of water per 25kg bag using an electrical drill. The work is to be supervised by 1 person with 2 skilled workers and 2 general workers.

Uploaded by

Lynn Mail
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
68 views2 pages

Work Method Statement FOR Application of Polymer Modified Structural Repair Motar

The document outlines the work method for applying a polymer modified structural repair mortar. It describes the scope of work, equipment and manpower needed, and the method of application. The method involves surface preparation, priming with an acrylic bonding agent, applying the mortar with a wood float and steel trowel to a thickness of 6mm, and mixing the mortar with water in a ratio of 2.5-3 liters of water per 25kg bag using an electrical drill. The work is to be supervised by 1 person with 2 skilled workers and 2 general workers.

Uploaded by

Lynn Mail
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd

WORK METHOD STATEMENT

FOR
APPLICATION OF POLYMER MODIFIED STRUCTURAL REPAIR MOTAR

SCOPE OF WORK

The scope of work covers the following activities such as mixing and application
technique.

EQUIPMENT AND MAN POWER

1) Scope - 3 nos.
2) Mixer - 1 no
3) Trowel - 3 nos.
4) Electrical drill - 1 no
5) Supervisor - 1
6) Skill workers - 2
7) General workers - 2

METHOD OF APPLICATION

1. Surface of concrete shall be free from oil, dust, grease, paint, corrosion and any
others substances.
2. Honey comb concrete shall be repaired with suitable non shrink cement.
3. Smooth surfaces shall be roughened.
4. Firstly surface of concrete shall be primed with acrylic emulsion bonding agent
‘Nitobond AR’. It will dry in approximately one hour.
5. ‘Renderoc S’ shall be applied when the ‘Nitobond AR’ is still tacky.
6. ‘Renderoc S’ shall be applied with a wood float.
7. Initially the application shall be with tamping action then follow by floating action.

1
8. Finishing shall be by steel trowel.
9. ‘Renderoc S’ shall be applied to the surface of concrete to 6 mm thickness.
10. For normal application 2.5 – 3.0 litres of water shall be added to a bag of 25 kg
‘Rendroc S’.
11. It shall be mixed in mixing container for several minutes.
12. Electrical drill shall be used to mix the ‘Renderoc S’.

You might also like