Scribd
Upload
116 views2 pages

Micro TC Small Temperature Controller

The MicroTC is a small, low-cost temperature controller that mounts with one screw. It provides on-off or proportional temperature control for heating or cooling applications between -10 to 85°C with +/- 0.5°C accuracy. The controller has a MOSFET output that can drive a solid state relay or small heater. It is available with fixed or adjustable setpoints and hysteresis.

Uploaded by

Nazir Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
116 views2 pages

Micro TC Small Temperature Controller

The MicroTC is a small, low-cost temperature controller that mounts with one screw. It provides on-off or proportional temperature control for heating or cooling applications between -10 to 85°C with +/- 0.5°C accuracy. The controller has a MOSFET output that can drive a solid state relay or small heater. It is available with fixed or adjustable setpoints and hysteresis.

Uploaded by

Nazir Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Small Temperature Controller

microTC

SSRMAN-1P
·
· Series
Extremely Cost Effective
Super Compact Design
·Mounts with One Screw
·Reverse or Direct Acting (Heat or Cool)
·Custom Temperature Ranges
·Fixed Setpoints & Hysteresis
·-10 to 85C with +/- 0.5degC Accuracy
·Freeze Protection, Temperature Control
·On-Off or Proportional Control
·Limited Two Year Warranty

Product Description Ordering Codes MicroTC - __._ - __._ - _ - _ - _


The Micro TC is the smallest and lowest cost
temperature controller in our line. The Micro Setpoint Temperature (XX.X degC) *(E) for External
TC is factory set for your setpoints and Band or Hysteresis (XX.X degC)
hysteresis but is available with field (O) On-Off Control OR (P) Proportional Control
adjustable versions using an external ( R ) Reverse or (D) Direct Acting Control
potentiometer. Micro TC provides a 3 Amp Power Supply Voltage, (12) or (24) VDC
MOSFET output that can be used to drive an
SSR or small heater. The integral sensor *For external setpoint, specify high and low limits of adjustment. For example:
eliminates the extra cost of a thermocouple MICROTC-E(20-40) would have an adjustment range of 20-40C.
or RTD.

Input Specifications
Power Supply 12 or 24VDC +/-10%, < 1 Watt Power Consumption
Temperature Setpoint Range 0 to 85 degC

Fixed Setpoint Accuracy +/- 0.5 degC

External Setpoint Input ~0-5VDC +/-1.5V (0-100% of Potentiometer)

Setpoint Input Impedance 100K


External Potentiometer Resistance 50KOhm

Output Specifications
Control Output MOSFET, Open Drain, 26V Max, Max Sink Current:
3A@25C, Ambient (Linear Derating to 1A@85C Ambient)
Output in proportional mode is time proportioned (PWM)

[Link] 866-379-3597 REV0.3


Thermal Specifcations
Operating Temperature Range 0 to 85 degC
Storage Temperature Range -40 to 100 degC

Dimensions & Wiring Operation

Reverse Acting (Heating) Examples:

0.500" Setpoint Temp


HYSTERESIS - (O)
1.675"

Output On Output Off Output On

0.169"
Setpoint Temp
PROPORTIONAL BAND - (P)

0.375" 100%
Output Off
0%
Note:Output is pulsed PWM proprtional output
0.125"

0.062"
0.100"

Direct Acting (Cooling) Examples:

HYSTERESIS - (O)
Setpoint Temp

+12 / 24VDC PWR (+V)


Output On Output Off Output On
+5V OUT (POTCW)
+V
LOAD
OUT (OPEN DRAIN)
SETPOINT (POTW)
GND, POT CCW (G)
PROPORTIONAL BAND - (P)
Setpoint Temp

100%
Output Off
0%
Note:Output is pulsed PWM proprtional output

[Link] 866-379-3597

You might also like