PRODUCTION TEST SHEET
Nova I Recloser
Operator Date:
Work Order OA No. : PO NO.:
Unit Type Unit Serial #
Actuator Board S/N: Actuator Force: (O) (C)
CT OVP S/N: ACT I S/N:
ECAP S/N A Ph: B Ph: C Ph:
○ VBS ● BOV S/N A Ph: B Ph: C Ph:
● IVS S/N A Ph: B Ph: C Ph:
CT S/N A Ph: B Ph: C Ph:
Accessories:
Notes:
Inspection and Test Summary Result
1. Visual Inspection
2. Calibrate (Break In)
3. Interrupter Gaps
4. Mechanical Characteristic
5. DC Resistance
6. Manual Operations
7. Minimum Operating Voltage
8. Maximum Operating Voltage
9. Undervoltage
10. CT Polarity
11. Recloser Characteristic
12. Heater Resistance:
13. Auxiliary Switch N/A
14. Hi-Pot&Partial Discharge
15. Secondary output voltage (for IVS only)
16. Counter record
1. Visual Inspection Assembly Quality
2. Calibrate (Break In) Result Number Operations
Calibrate (Break In) Result 200
3. Interrupter Gaps
○（15KV&27KV&38KV VBS : .550-.565in）: ●（15KV&27KV&38KV BOV: .0.476~0.508in）: PASS
Cooper Electronic Technologies (Shanghai) Co., Ltd. CETS-CPS-QAWI-051.1 Rev 03 page 1 of 3
PPPP
4. Mechanical Characteristic (the test data is only for reference)
Closing velocity: ms Opening velocity: ms
Closing bounce (0-5ms) Ph A Ph B Ph C
5. DC Resistance (1-125 Micro-Ohms) Ph A Ph B Ph C
6. Manual Operations Result Number Operations
Manual Open Handle Down/Electrical Close / /
Electrical not Closing with Manual Opening Operations
7. Minimum Operating Voltage (47.7V) Result Number Operations
Minimum Operating Voltage Results
8. Maximum Operating Voltage (56V) Result Number Operations
Maximum Operating Voltage Results
9. Undervoltage (35V) Result Number Operations
Undervoltage Result
10. CT Polarity Result Ground AMPS A Ph AMPS B Ph AMPS C Ph AMPS
(25-35A) (10+/-1) (10+/-1) (10+/-1)
CT Polarity Resul
Single CT Polarity Ph A N/A Ph B N/A Ph C N/A
CT wiring check Ph A Ph B Ph C
11. Recloser Characteristic
Phase minimum trip PASS (1-opers. TCC1:101) minimum trip@100A
Minimum trip A∮ (95~105A) B∮ (95~105A) C∮ (95~105A)
Ground minimum trip PASS (1-opers. TCC1:102) minimum trip@100A
Minimum trip A∮ (95~105A) B∮ (95~105A) C∮ (95~105A)
Phase TCCs PASS (2-opers. TCC1:101; 2-opers. TCC2:117) minimum trip@100A
Timing@150% (s) (.001~.086s) (.001~.086s) (1.942~2.857s) (1.942~2.857s)
Timing@900% (s) (.001~.065s) (.001~.065s) (0.120~0.176s) (0.120~0.176s)
Ground TCCs PASS (2-opers. TCC1:102; 2-opers. TCC2:135) minimum trip@100A
Timing@150% (s) (.001~.110s) (.001~.110s) (5.23~8.15s) (5.23~8.15s)
Timing@900% (s) (.001~.066s) (.001~.066s) (.642~.798s) (.642~.798s)
Reclose Times PASS
Timing@150% (s) #1 (0.25~0.4s) #2 (1.8~2.2s) #3 (1.8~2.2s)
Cooper Electronic Technologies (Shanghai) Co., Ltd. CETS-CPS-QAWI-051.1 Rev 03 page 2 of 3
12. Heater Resistance Result Value
○ 120V AC, 125V DC (800 ohms) kΩ
● 240V AC, 250V DC (3000 ohms) kΩ
13. Aux. Switch, Hi-Pot (10s @ 1500VAC): N/A
14. Hi-Pot Test&Partial Discharge
○ 15kv: 60s @ 50000VAC PD: 11000VAC<100pc
○ 27kv: 60s @ 60000VAC PD: 19000VAC<100pc
● 38kv: 60s @ 70000VAC PD: 26000VAC<100pc
15. Secondary output voltage ( for IVS only)
○ VBS IVS
15kv: Input voltage: 8.3 KV Output voltage (6.39 to 7.21 Volts)
○ PhA PhB PhC
○ 27kv: Input voltage: 14.4KV Output voltage (5.55 to 6.25 Volts)
PhA PhB PhC
○ 38kv: Input voltage: 19.9KV Output voltage (7.67 to 8.65 Volts)
PhA PhB PhC
● BOV IVS
○ 15kv: Input voltage: 8.3 KV Output voltage (3.20 to 3.61 Volts)
PhA PhB PhC
○ 27kv: Input voltage: 14.4KV Output voltage (5.55 to 6.25 Volts)
PhA PhB PhC
●38kv: Input voltage: 19.9KV Output voltage (7.67 to 8.65 Volts)
PhA PhB PhC
16. Counter record
Inspected by Date
Cooper Electronic Technologies (Shanghai) Co., Ltd. CETS-CPS-QAWI-051.1 Rev 03 page 3 of 3
