Scribd
Upload
21K views2 pages

Welding Machine Inspection Checklist

The inspection checklist contains 20 items related to welding machine safety. It verifies that only authorized personnel use welding equipment, cables and joints are in good condition, combustible materials are removed, proper signage is posted, protective equipment is used, ventilation is adequate, and fire extinguishers are available. The checklist is used to ensure welding operations comply with safety standards and hazards are mitigated.

Uploaded by

Raza Muhammad Soomro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
21K views2 pages

Welding Machine Inspection Checklist

The inspection checklist contains 20 items related to welding machine safety. It verifies that only authorized personnel use welding equipment, cables and joints are in good condition, combustible materials are removed, proper signage is posted, protective equipment is used, ventilation is adequate, and fire extinguishers are available. The checklist is used to ensure welding operations comply with safety standards and hazards are mitigated.

Uploaded by

Raza Muhammad Soomro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

Company logo Company name with project name Project logo

INSPECTION CHECKLIST OF WELDING MACHINE

Project Name: Date:


Time: Checked by
STATUS REMARKS
S.
ITEMS YE
N NO
S
Do you allow only authorized and trained personnel to use welding
1
equipment?
2 Provided with earthing or grounding properly.
Properly insulated and no exposed cables & Size of cable is suitable for
3
voltage supply
4 Hang on insulated hook or material & Hang up to prevent tripping hazard
5 Cables and joints are proper and in good condition
6 No combustible or flammable materials means good housekeeping
7 Are signs posted that read “DANGER, NO SMOKING, MATCHES”?
8 Inspect cable connections on machine & Inspect earth clamp for damage.
Inspect electrode pliers/holder for damage & Inspect feeder cable and plug
10
for damage
Is open circuit (no load) voltage of arc welding and cutting machines as low as
11
possible and not more than the recommended limit?
Are employees required to shut off the electric power to the welder when no
12
one is using it?
Is work and electrode leading cable frequently inspected for wear and
13
damage and replaced when needed?
Before hot work begins, are drums, barrels, tanks, and other containers
14 thoroughly cleaned and tested so that no substances remain that could
explode, ignite, or produce toxic vapors?
Do eye-protection helmets, hand shields, and goggles meet appropriate
15
standards?
Do employees use appropriate PPE when exposed to the hazards of welding
16
and cutting operations?
Do you check for adequate ventilation where welding or cutting is
17
performed?
Are fire watchers assigned when welding or cutting is performed in locations
where a fire might develop?
18 Are electrodes removed from holders when not in use?
Is suitable fire-extinguishing equipment available for immediate use and Fire
20
blanket is provided?
Company logo Company name with project name Project logo

INSPECTION CHECKLIST OF WELDING MACHINE

Inspected by: _______________________ Reviewed By: ______________________

You might also like