Scribd
Upload
172 views8 pages

PK 165.002 TEC 7 Crane Specifications

This document provides technical specifications for the PK 165.002 TEC 7 crane. It has a maximum lifting capacity of 32,000 kg, maximum outreach of 21 meters, and maximum outreach with a fly-jib of 36.1 meters. The crane features lightweight design, high-tech control systems, and optional components like DPS-C, HPSC Plus, P-Fold, and rope winches up to 4.5 tons. Its gross vehicle weight is less than 32 tons when fully equipped.

Uploaded by

Mahde Ktep
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
172 views8 pages

PK 165.002 TEC 7 Crane Specifications

This document provides technical specifications for the PK 165.002 TEC 7 crane. It has a maximum lifting capacity of 32,000 kg, maximum outreach of 21 meters, and maximum outreach with a fly-jib of 36.1 meters. The crane features lightweight design, high-tech control systems, and optional components like DPS-C, HPSC Plus, P-Fold, and rope winches up to 4.5 tons. Its gross vehicle weight is less than 32 tons when fully equipped.

Uploaded by

Mahde Ktep
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

PK 165.

002 TEC 7
LIFETIME EXCELLENCE

LIGHTWEIGHT DESIGN MEETS HIGH-TECH


CONTROL SYSTEMS
PK 165.002 TEC 7

C E

F G

2
H

3
PK 165.002 TEC 7

TECHNICAL DATA (EN 13001 HC1 HD5/S1) TEC 7

Max. lifting moment 124.8 mt/1224.3 kNm 903020 [Link] è Power Link Plus
Max. lifting capacity 32000 kg/313.9 kN 70600 lb è Paltronic 150
è S-HPLS
Max. hydraulic outreach 21.0 m 68' 10''
è PALcom P 7
Max. outreach (with fly-jib) 36.1 m 118' 4''
è Soft Stop
Slewing angle continuous
è Optional:
Slewing torque 12.0 mt/117.8 kNm 86880 [Link] - DPS-C
Stabiliser spread 10.0 m 32' 10'' - HPSC Plus
Width folded 2.55 m 8' 4'' - P-Fold
Max. operating pressure 385 bar 5584 psi - PJ 240 or PJ 300
Recommended pump capacity 2 x 120 l/min 31.7 US gpm - Rope winch 3.5t / 4.5t
Dead weight: (HYA C R4X) 11510 kg 25370 lb

GROSS VEHICLE WEIGHT of less than 32ton - fully equipped

4
G PJ 240 E DPS Plus

5
PK 165.002 TEC 7

G PJ 240 E DPS-C



6
F PJ 300L F DPS-C

7
[Link]

PK 165.002 TEC 7+EN / E 11 / 15, K 11 / 15, D 11 / 15

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

You might also like