Scribd
Upload
88 views1 page

Test Report for Material Compliance

This document contains test results for a sample material. It reports the results of 16 tests, including tests for tensile strength, flexibility, thermal stability, water permeability, thickness, width, weight, and labeling. For each test, the measurement units, allowed tolerance range, measured value, and test method are provided. All tests show the material is within the specified tolerances and complies with the relevant test standards.

Uploaded by

Ahmad Yousefi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
88 views1 page

Test Report for Material Compliance

This document contains test results for a sample material. It reports the results of 16 tests, including tests for tensile strength, flexibility, thermal stability, water permeability, thickness, width, weight, and labeling. For each test, the measurement units, allowed tolerance range, measured value, and test method are provided. All tests show the material is within the specified tolerances and complies with the relevant test standards.

Uploaded by

Ahmad Yousefi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Sample for test report

Date:
Initial Type Testing Page: 1 of 1
Compliance
Row Test units tolerance value Test method
status
Minimum percentage increase EN 12311-1
1 % 25
in the relative length ISIRI 3885-1
Minimum percentage increase EN 12311-1
2 % 25
in the relative width ISIRI 3885-1
Minimum, Tensile strength at
3 Kg/5cm 40 ISIRI 3885-1
maximum power point length
Minimum, Tensile strength at
4 Kg/5cm 30 ISIRI 3885-1
maximum power point width
Minimum resistance to rupture
5 Kgf 12 ISIRI 3885-1
length
Minimum resistance to rupture
6 Kgf 12 ISIRI 3885-1
width
Maximum water absorption (in
7 % 1 ISIRI 3885-1
28 days)
EN 1109
Maximum flexibility in the
8 °C 0 EN 1296
cold
ISIRI 3885-1
The minimum rates of thermal EN 1110
9 °C 120
stability ISIRI 3885-1
Minimum of dimensions of EN 1107-1
10 % ± 0.2
stability against heat (length) ISIRI 3885-1
Minimum of dimensions of EN 1107-1
11 % ± 0.2
stability against heat (width) ISIRI 3885-1
The minimum amount of water
12 Kpa 60 EN 1928-1
permeability
13 Thickness mm 4 ± 0.2 EN 1849-1

14 Width mm 100 ± 1 EN 1848-1

15 Weight per m2 Kg/m2 4.1 ± 0.2 EN 1849-1

16 Labeling --- --- EN 13707

You might also like